From 11ba72b7f4c7a545a2053d03ac72f8219d145b22 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期六, 07 十一月 2020 17:42:14 +0800
Subject: [PATCH] Revert "Revert "Revert "Revert "V1.34 增加滤波 防撞1对10发货""""

---
 源码/核心板/Src/application/dw_app.h |   36 ++++++++++++++++++++++++------------
 1 files changed, 24 insertions(+), 12 deletions(-)

diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.h" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.h"
index b7a69d9..cb3115f 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.h"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.h"
@@ -18,12 +18,15 @@
 #include <stdio.h>
 #include "beep.h"
 #include <math.h>
-//#define WORK_MODE_TAG
-#define WORK_MODE_ANCHOR
+#include "TrackingDiff.h"
+//#define USART_INTEGRATE_OUTPUT
+
 
 //#define NEWBOARD
 //#define TAG_OUTPUT
 #define HEX_OUTPUT
+
+#define MAX_NEARBASE_NUM 12
 
 #define REPOET_ANC_NUM 1
 #define REPOET_ANC_NUM_MIN 1
@@ -32,7 +35,8 @@
 #define TAG_NUM_IN_SYS				256
 #define DFT_RAND_DLY_TIM_MS			1
 #define QUIT_SLOT_TIME    5
-
+#define KEEP_TIMES 3
+#define SLOT_SCALE 0.7
 #define RNG_DELAY_MS 100
 
 /* Default antenna delay values for 64 MHz PRF. See NOTE 1 below. */
@@ -50,11 +54,11 @@
  * frame length of approximately 2.66 ms with above configuration. */
 #define RESP_RX_TO_FINAL_TX_DLY_UUS 410
 /* Receive response timeout. See NOTE 5 below. */
-#define RESP_RX_TIMEOUT_UUS 600
+#define RESP_RX_TIMEOUT_UUS 2000
 
-#define DELAY_BETWEEN_TWO_FRAME_UUS 240
+#define DELAY_BETWEEN_TWO_FRAME_UUS 400
 
-#define POLL_RX_TO_RESP_TX_DLY_UUS 420
+#define POLL_RX_TO_RESP_TX_DLY_UUS 470
 /* This is the delay from the end of the frame transmission to the enable of the receiver, as programmed for the DW1000's wait for response feature. */
 #define RESP_TX_TO_FINAL_RX_DLY_UUS 200
 /* Receive final timeout. See NOTE 5 below. */
@@ -82,7 +86,11 @@
 #define DIST_IDX 							10
 #define ANCTIMEMS             14
 #define ANCTIMEUS             16
-#define TAGSLOTPOS						8
+#define MAINBASE_INDEX        18
+#define MOTORSTATE_INDEX      19
+#define REMOTEPARA_INDEX      20
+
+#define TAGSLOTPOS						7
 //Final
 #define FINAL_MSG_POLL_TX_TS_IDX 10
 #define FINAL_MSG_RESP_RX_TS_IDX 14
@@ -90,16 +98,19 @@
 #define FINAL_MSG_RESP_RX_NEARBASE_IDX  22
 #define FINAL_MSG_TS_LEN 4
 //SYNC
+#define ANCHOR_ID_IDX    			1
 #define SYNC_SEQ_IDX    			5
 //NEAR MSG
+#define NEARMSG_EMPTYSLOTPOS_INDEX		 1 //RESPONSE
 #define NEARBASENUM_INDEX    10
 #define NEARBASEID_INDEX		 11
 //NEAR POLL
-#define BATTARY_IDX						1
-#define BUTTON_IDX						2
 #define SEQUENCE_IDX					3
+#define BATTARY_IDX						4
+#define BUTTON_IDX						7
 
-#define THRESHOLD_CHANGE_MAINBASE_DIST   50
+#define REMOTEPARA_LEN 18
+#define THRESHOLD_CHANGE_MAINBASE_DIST   5
 extern u8 neartimout_timer;
 extern u16 slottime,tyncpoll_time,max_slotpos;
 extern u16 poll_timer,tag_timer;
@@ -112,7 +123,7 @@
 extern uint32_t g_UWB_com_interval;
 extern float dis_after_filter;
 extern LPFilter_Frac* p_Dis_Filter;		//测距用的低通滤波器
-extern u8 usart_send[25];
+extern u8 usart_send[100],usart_send_anc[100],flag_syncbase,remotesend_state, remotetag_para[30];;
 
 void IdleTask(void);
 uint16_t Checksum_u16(uint8_t* pdata, uint32_t len);
@@ -125,5 +136,6 @@
 extern void TagDistClear(void);
 void Dw1000_App_Init(void);
 void TagListUpdate(void);
-void SyncPoll(u8 sync_seq);
+void SyncPoll(u8 sync_seq,uint32_t sync_baseid);
+u8 GetRandomSlotPos(uint32_t emptyslot);
 #endif

--
Gitblit v1.9.3