From 125d49c1d48d96611c1ec68df5dc870433b44581 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期五, 17 七月 2020 21:27:52 +0800
Subject: [PATCH] 增加硬件标识V1.21
---
源码/核心板/Src/main.c | 63 +++++++++++++++++++++++++++----
1 files changed, 55 insertions(+), 8 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index 327263c..224ab19 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -46,6 +46,8 @@
}
u16 tyncpoll_time;
u16 slottime,max_slotpos;
+extern u8 module_power;
+extern u16 total_slotnum;
void Program_Init(void)
{ float temp;
u16 temp2;
@@ -65,12 +67,17 @@
save_com_map_to_flash();
#endif
OUT485_ENABLE;
- g_com_map[VERSION] = 0x010e;
+ g_com_map[VERSION] = 0x0115;
dev_id = g_com_map[DEV_ID];
- slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]/4)+4;
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*0.4)+3;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
-
+ module_power = g_com_map[POWER];
+ total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ if(module_power>67)
+ {
+ module_power=67;
+ }
if(g_com_map[DEV_ROLE])
{
@@ -109,10 +116,15 @@
UART_PushFrame(hbsend,16);
}
extern u8 g_start_sync_flag,usart_send_flag,anc_report_num;
-u16 heartbeat_timer,poll_timer,sync_timer;
+u16 heartbeat_timer,poll_timer;
+int16_t sync_timer;
+extern u8 flag_newsecond, tagpos_rec[50], tagpos_send[50],ancidlist_num;
+uint32_t tagpos_binary;
+extern u16 ancidlist_rec[20],ancidlist_send[20];
+extern u16 target_time;
void IdleTask(void)
{
- main_logic();
+
UART_CheckReceive();
UART_CheckSend();
if(heartbeat_timer>1000)
@@ -121,17 +133,33 @@
if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
HeatBeat();
}
-
+ if(flag_newsecond)
+ {
+ flag_newsecond=0;
+ tagpos_binary=0;
+ memcpy(ancidlist_send,ancidlist_rec,ancidlist_num*2);
+ ancidlist_num=0;
+ for(u8 i=0;i<max_slotpos;i++)
+ {
+ if(tagpos_rec[i])
+ tagpos_binary|=1<<i;
+ tagpos_rec[i] = 0;
+ }
+ }
+ if(target_time>1000)
+ {target_time-=1000;}
+ #ifdef USART_INTEGRATE_OUTPUT
if(g_com_map[DEV_ROLE]==0&&usart_send_flag)
{u16 checksum;
usart_send_flag=0;
- usart_send_anc[2] = 5;//正常模式
+ usart_send_anc[2] = 4;//正常模式
usart_send_anc[3] = anc_report_num*6+2;//正常模式
checksum = Checksum_u16(&usart_send_anc[2],anc_report_num*6+2);
memcpy(&usart_send_anc[4+anc_report_num*6],&checksum,2);
UART_PushFrame(usart_send_anc,6+anc_report_num*6);
anc_report_num=0;
}
+ #endif
if(g_com_map[CNT_UPDATE]==1)
{
uint32_t result = 0;
@@ -149,6 +177,25 @@
// Delay_ms(100);
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+ if(g_com_map[CNT_REBOOT]==1)
+ {
+ g_com_map[CNT_REBOOT]=0;
+ g_com_map[MAP_SIGN_INDEX]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[CNT_RESTART]==1)
+ {
+ g_com_map[CNT_RESTART]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
}
int main(void)
@@ -165,7 +212,7 @@
usart_send[1]=0xAA;
usart_send_anc[0]=0x55;
usart_send_anc[1]=0xAA;
-
+
while(1)
{
g_start_sync_flag=0;
--
Gitblit v1.9.3