From 1bd0743ea0e8783f11dd0b3c373617201ae9ffbf Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期六, 05 三月 2022 21:48:55 +0800
Subject: [PATCH] V1.65 修复继电器状态BUG
---
源码/核心板/Src/main.c | 308 +++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 283 insertions(+), 25 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index 4d5adbc..da1ab3d 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -2,6 +2,7 @@
#include "Rcc_Nvic_Systick.h"
#include "Usart.h"
#include "Spi.h"
+#include "Flash.h"
#include "led.h"
#include "beep.h"
#include "dw_driver.h"
@@ -9,36 +10,183 @@
#include "stm32f10x_it.h"
#include "serial_at_cmd_app.h"
#include "global_param.h"
+#include "ADC.h"
-//#define WORK_MODE_TAG
-#define WORK_MODE_ANCHOR
+//#define DEBUG_MODE
+/*
+ * rlv:重装载寄存器的值，取值范围为：0-0XFFF
+ * 函数调用举例：
+ * IWDG_Config(IWDG_Prescaler_64 ,625); // IWDG 1s 超时溢出
+ * （64/40）*625 = 1s
+ */
+void IWDG_Config(uint8_t prv ,uint16_t rlv)
+{
+ // 使能 预分频寄存器PR和重装载寄存器RLR可写
+ IWDG_WriteAccessCmd( IWDG_WriteAccess_Enable );
+
+ // 设置预分频器值
+ IWDG_SetPrescaler( prv );
+
+ // 设置重装载寄存器值
+ IWDG_SetReload( rlv );
+
+ // 把重装载寄存器的值放到计数器中
+ IWDG_ReloadCounter();
+
+ // 使能 IWDG
+ IWDG_Enable();
+}
+void IWDG_Feed(void)
+{
+ IWDG_ReloadCounter();
+}
void Device_Init(void)
{
-// Rcc_Init();
- SystemInit();
+ RCC_Configuration();
+ //SystemInit();
+ NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
Nvic_Init();
- Systick_Init();
-#ifdef WORK_MODE_TAG
- RTC_Configuration();
-#endif
+// Systick_Init();
+ TIM3_Int_Init();
Led_Init();
Beep_Init();
DW_GPIO_Init();
Uart1_Init();
Spi_Init();
-
-
+ ADC_Configuration();
+ IWDG_Config(IWDG_Prescaler_128 ,4095); //10s
+ IWDG_Feed();
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
}
+u8 anchor_type;
+u32 dev_id;
+u8 hbsend[16];
+void HeartBeatInit(void)
+{
+ u16 checksum;
+ hbsend[0]=0x55;
+ hbsend[1]=0xAA;
+ hbsend[2]=0x2;
+ hbsend[3]=0xc;
+ memcpy(&hbsend[4],&g_com_map[DEV_ID],2);
+ checksum = Checksum_u16(&hbsend[2],12);
+ memcpy(&hbsend[14],&checksum,2);
+}
+uint16_t vel_factor,pos_factor;
+u16 tyncpoll_time,dist_threshold,group_id;
+u16 slottime,max_slotpos;
+extern u8 module_power;
+extern u16 total_slotnum;
+void ComMapCheck(void)
+{
+
+ if(g_com_map[ANT_LENGTH]>10000)
+ {
+ g_com_map[ANT_LENGTH] = 0;
+ }
+ if(g_com_map[WAR_JDQ_TIME]>1000||g_com_map[WAR_JDQ_TIME]<0)
+ {
+ g_com_map[WAR_JDQ_TIME] = 1;
+ }
+ if(g_com_map[COM_INTERVAL]==0)
+ {
+ g_com_map[COM_INTERVAL]=100;
+ }
+}
+u16 JDQ_time;
+int16_t g_commap_antdelay;
void Program_Init(void)
-{uint16_t i;
+{ float temp;
+ u16 temp2;
+ uint16_t i;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
+ //deca_sleep(1000);
+ HeartBeatInit();
+ Modbus_RegMap();
+#ifdef DEBUG_MODE
+// g_com_map[DEV_ROLE]=1;
+// g_com_map[DEV_ID]=1;
+// g_com_map[COM_INTERVAL]=100;
+// g_com_map[MAX_REPORT_ANC_NUM]=3;
+// g_com_map[NEARBASE_NUM]=1;
+// g_com_map[NEARBASE_ID1]=2;
+ g_com_map[ANC_FLAG]=1;
+ save_com_map_to_flash();
+#endif
+//
+// g_com_map[COM_INTERVAL]=100;
+// g_com_map[MAX_REPORT_ANC_NUM]=10;
+// g_com_map[GROUP_ID]=0;
+// g_com_map[DIST_OFFSET]=-116;
+
+// g_com_map[DEV_ROLE] =0x0; //基站
+//
+// g_com_map[ANC_POLL]=1;
+// g_com_map[ALARM_DEV] = 0;
+// g_com_map[ALARM_DISTANCE1] = 0; //默认报警距离50cm
+// g_com_map[ALARM_DISTANCE2] = 900; //默认报警距离50cm
+// g_com_map[ALARM_DISTANCE3] = 1400; //默认报警距离50cm
+// g_com_map[RELAY2_DISTANCE1] = 0; //默认报警距离50cm
+// g_com_map[RELAY2_DISTANCE2] = 900; //默认报警距离50cm
+// g_com_map[RELAY2_DISTANCE3] = 1400; //默认报警距离50cm
+// g_com_map[WAR_JDQ_TIME] = 1; //1秒
+// g_com_map[POWER]=30;
+// g_com_map[SPEEDFILTER_THRES]=10000;
+// g_com_map[FILTER_COEFFICIENT]=40;
+// g_com_map[ANT_LENGTH]=0;
+// g_com_map[NOMOVESLEEP_TIME]=728;
+
+
+ OUT485_ENABLE;
+ ComMapCheck();
+ g_com_map[VERSION] = 1<<8|65;
+ FLASH_Read(FLASH_HARDWARE_FLAG, (uint8_t*)&g_com_map[HARDWAREFLAG_INDEX], 16);
+ dist_threshold = (g_com_map[SPEEDFILTER_THRES]*10)/(1000/g_com_map[COM_INTERVAL]);
+ if(dist_threshold<300)
+ {dist_threshold = 300;}
+ if(dist_threshold>15000)
+ {dist_threshold = 15000;}
+ g_commap_antdelay = g_com_map[ANT_LENGTH];
+ JDQ_time = g_com_map[WAR_JDQ_TIME]*10;
+ g_com_map[SW_TYPE] = SW_FANGZHUANG;
+ dev_id = g_com_map[DEV_ID];
+ group_id=g_com_map[GROUP_ID];
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
+ max_slotpos=g_com_map[COM_INTERVAL]/slottime;
+ tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
+ module_power = g_com_map[POWER];
+ total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ vel_factor=g_com_map[FILTER_COEFFICIENT];
+ pos_factor=g_com_map[FILTER_COEFFICIENT];
+
+ if(module_power>67)
+ {
+ module_power=67;
+ }
+
+ if(g_com_map[DEV_ROLE])
+ {
+ printf("标签ID: %d .\r\n",dev_id);
+ printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
+ printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
+ }else{
+
+ anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
+ printf("基站ID: %x .\r\n",dev_id);
+ printf("基站类型: %c .\r\n",anchor_type+0x41);
+ printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
+ }
+ OUT485_DISABLE;
+// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
+// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
+
+
for(i=0;i<255;i++)
{
- g_Tagdist[i]=0xffff;
+ g_Tagdist[i]=0x1ffff;
}
}
@@ -51,33 +199,143 @@
*
* @return none
*/
+void HeatBeat(void)
+{
+UART_PushFrame(hbsend,16);
+}
+uint16_t temp;
+float dw_vbat;
+void StartUpTest(void)
+{
+ temp=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp&0xff)-173)/173+3.3;
+ if(dw_vbat<2.8)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+}
+extern u8 g_start_sync_flag,usart_send_flag,anc_report_num;
+u16 heartbeat_timer,poll_timer;
+int16_t sync_timer;
+extern u8 flag_newsecond, tagpos_rec[50], tagpos_send[50],ancidlist_num;
+uint32_t tagpos_binary;
+extern u16 ancidlist_rec[20],ancidlist_send[20];
+extern u16 target_time;
+void IdleTask(void)
+{
+
+ UART_CheckReceive();
+ UART_CheckSend();
+
+ if(heartbeat_timer>1000)
+ {
+ heartbeat_timer=0;
+ if(g_com_map[HEARTBEAT])
+ HeatBeat();
+ }
+ if(flag_newsecond)
+ {
+ uint32_t temp23;
+// temp23 = dwt_read32bitreg(CHAN_CTRL_ID) ;
+// if(temp23!=0x4A480022)
+// {
+// temp23 = dwt_read32bitreg(CHAN_CTRL_ID) ;
+// if(temp23!=0x4A480022)
+// {
+// NVIC_SystemReset();
+// }
+// }
+ flag_newsecond=0;
+ tagpos_binary=0;
+ memcpy(ancidlist_send,ancidlist_rec,ancidlist_num*2);
+ ancidlist_num=0;
+ for(u8 i=0;i<max_slotpos;i++)
+ {
+ if(tagpos_rec[i])
+ tagpos_binary|=1<<i;
+ tagpos_rec[i] = 0;
+ }
+ }
+ if(target_time>=1000)
+ {target_time-=1000;}
+ #ifdef USART_INTEGRATE_OUTPUT
+ if(g_com_map[DEV_ROLE]==0&&usart_send_flag)
+ {u16 checksum;
+ usart_send_flag=0;
+ usart_send_anc[2] = 5;//正常模式
+ usart_send_anc[3] = anc_report_num*6+2;//正常模式
+ checksum = Checksum_u16(&usart_send_anc[2],anc_report_num*6+2);
+ memcpy(&usart_send_anc[4+anc_report_num*6],&checksum,2);
+ UART_PushFrame(usart_send_anc,6+anc_report_num*6);
+ anc_report_num=0;
+ }
+ #endif
+ if(g_com_map[CNT_UPDATE]==1)
+ {
+ uint32_t result = 0;
+ u16 tmp = 0xAAAA;
+ __disable_irq();
+ result = FLASH_Prepare(0x8004A38, 2);
+ if(result)
+ result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
+ __enable_irq();
+ printf("进入升级模式\r\n");
+ g_com_map[CNT_UPDATE]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
+ // Delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[CNT_REBOOT]==1)
+ {
+ FactorySettings();
+
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[CNT_RESTART]==1)
+ {
+ g_com_map[CNT_RESTART]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ g_com_map[RELAY1_STATE_INDEX] = READ_RELAY1;
+ g_com_map[RELAY2_STATE_INDEX] = READ_RELAY2;
+ }
+
int main(void)
{
-
- Device_Init();
+
+ Device_Init();
+ //StartUpTest();
Program_Init();
Dw1000_Init();
-
-#ifdef WORK_MODE_TAG
- tag_sleep_configuraion();
-#endif
+ delay_ms(10);
Dw1000_App_Init();
/* Loop forever initiating ranging exchanges. */
+ RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
+ usart_send[0]=0x55;
+ usart_send[1]=0xAA;
+ usart_send_anc[0]=0x55;
+ usart_send_anc[1]=0xAA;
+
while(1)
{
-#ifdef WORK_MODE_TAG
+ g_start_sync_flag=0;
if(g_start_send_flag)
{
- g_start_send_flag = 0;
+ g_start_send_flag = 0;
Tag_App();
}
-// UART_CheckReceive();
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
- PWR_EnterSTOPMode(PWR_Regulator_LowPower, PWR_STOPEntry_WFI);
-#else
+ IdleTask();
+if(g_com_map[DEV_ROLE]==0)
Anchor_App();
-#endif
}
}
--
Gitblit v1.9.3