From 2e895d0a7b81c6216457ddd23690c1249ceb993d Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期五, 24 七月 2020 10:09:38 +0800
Subject: [PATCH] V1.22 去掉标签串口输出
---
源码/核心板/Src/application/dw_app.c | 32 ++++++++++++++++++--------------
1 files changed, 18 insertions(+), 14 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
index 33a51d4..157564f 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
@@ -402,7 +402,7 @@
temp_sync_timer2=sync_timer;
memcpy(&temp_sync_timer1,&rx_buffer[ANCTIMEMS],2);
memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
- exsistbase_list[0]=KEEP_TIMES;
+
if(g_com_map[DEV_ROLE]!=0)
{
@@ -426,10 +426,12 @@
// tyncpoll_time=(tagslotpos-1)*slottime;
////////////////////////////
rec_nearbasepos=0;
- exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
+
memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
nearbase_distlist[rec_nearbasepos]=temp_dist;
-
+ if(temp_dist!=0x1ffff)
+ exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
+
mainbase_lost_count=0;
flag_finalsend=1;
final_tx_time = (resp_rx_ts + ((RESP_RX_TO_FINAL_TX_DLY_UUS+DELAY_BETWEEN_TWO_FRAME_UUS*nearbase_num+500) * UUS_TO_DWT_TIME)) >> 8;
@@ -457,9 +459,11 @@
memcpy(&tx_nearfinal_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
}
- exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
nearbase_distlist[rec_nearbasepos]=temp_dist;
+
+ if(temp_dist!=0x1ffff)
+ exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
final_msg_set_ts(&tx_nearfinal_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);
dwt_writetxdata(28+nearbase_num*4, tx_nearfinal_msg, 0);//将发送数据写入DW1000
@@ -480,7 +484,7 @@
usart_send[14] = button;
checksum = Checksum_u16(&usart_send[2],17);
memcpy(&usart_send[19],&checksum,2);
- UART_PushFrame(usart_send,21);
+ // UART_PushFrame(usart_send,21);
#endif
//dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
@@ -576,13 +580,13 @@
}
// printf("%d,%d",temp_sync_timer2,temp_sync_timer1);
- #ifdef USART_INTEGRATE_OUTPUT
- usart_send[2] = 4;//正常模式
- usart_send[3] = report_num*6+2;//正常模式
- checksum = Checksum_u16(&usart_send[2],report_num*6+2);
- memcpy(&usart_send[4+report_num*6],&checksum,2);
- UART_PushFrame(usart_send,6+report_num*6);
- #endif
+// #ifdef USART_INTEGRATE_OUTPUT
+// usart_send[2] = 4;//正常模式
+// usart_send[3] = report_num*6+2;//正常模式
+// checksum = Checksum_u16(&usart_send[2],report_num*6+2);
+// memcpy(&usart_send[4+report_num*6],&checksum,2);
+// UART_PushFrame(usart_send,6+report_num*6);
+// #endif
// if(mainbase_lost_count>5)
// {
// //tag_state=DISCPOLL;
@@ -799,7 +803,7 @@
if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE1])
{
- motorstate =3;
+ motorstate =0;
}else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE2])
{
motorstate =2;
@@ -951,7 +955,7 @@
dwt_readrxdata(rx_buffer, frame_len, 0);//读取接收数据
memcpy(&anc_id_recv,&rx_buffer[ANCHOR_ID_IDX],2);
//将收到的tag_id分别写入各次通讯的包中，为多标签通讯服务，防止一次通讯中接收到不同ID标签的数据
- tag_id_recv = rx_buffer[TAG_ID_IDX];
+ memcpy(&tag_id_recv,&rx_buffer[TAG_ID_IDX],2);
switch(rx_buffer[MESSAGE_TYPE_IDX])
{
// case POLL:
--
Gitblit v1.9.3