From 3674e113e9923184e8f1bd497c2f7832fc959d29 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期一, 21 二月 2022 14:47:50 +0800
Subject: [PATCH] V1.66 修改标签报警逻辑bug
---
源码/核心板/Src/application/dw_app.c | 48 ++++++++++++++++++++++++++++++++----------------
1 files changed, 32 insertions(+), 16 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
index 20612af..3589abd 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
@@ -49,7 +49,7 @@
float dis_after_filter; //当前距离值
LPFilter_Frac* p_Dis_Filter; //测距用的低通滤波器
int32_t g_Tagdist[TAG_NUM_IN_SYS];
-uint8_t g_flag_Taggetdist[256];
+uint8_t g_flag_Taggetdist[256],flag_tag_distsmooth[TAG_NUM_IN_SYS];
static uint64_t get_tx_timestamp_u64(void)
{
@@ -882,18 +882,7 @@
dwt_setrxaftertxdelay(RESP_TX_TO_FINAL_RX_DLY_UUS+(rec_nearbase_num+1-ancrec_nearbasepos)*DELAY_BETWEEN_TWO_FRAME_UUS);//设置发送完成后开启接收延迟时间
dwt_setrxtimeout(FINAL_RX_TIMEOUT_UUS);//接收超时时间
- if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE1])
- {
- motorstate =0;
- }else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE2])
- {
- motorstate =2;
- }else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE3])
- {
- motorstate =1;
- }else{
- motorstate =0;
- }
+
if(new_tagid)
{
@@ -902,7 +891,28 @@
}else{
memcpy(&tx_nearresp_msg[DIST_IDX], &tagdist_list[taglist_pos], 4);
}
- tx_nearresp_msg[GROUP_ID_IDX] = group_id;
+
+ if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE1]||tagdist_list[taglist_pos]==0)
+ {
+ motorstate =0;
+ }else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE2])
+ {
+ if(flag_tag_distsmooth[taglist_pos])
+ {motorstate =2;
+ }else{
+ motorstate =0;
+ }
+ }else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE3])
+ {
+ if(flag_tag_distsmooth[taglist_pos])
+ {motorstate =1;
+ }else{
+ motorstate =0;
+ }
+ }else{
+ motorstate =0;
+ }
+ tx_nearresp_msg[GROUP_ID_IDX] = group_id;
tx_nearresp_msg[MAINBASE_INDEX]=flag_syncbase;
tx_nearresp_msg[MESSAGE_TYPE_IDX]=NEAR_RESPONSE;
tx_nearresp_msg[MOTORSTATE_INDEX]=(remotesend_state<<4)|motorstate;
@@ -980,6 +990,12 @@
if(hex_dist>-100000&&hex_dist<2000000)
{
+ if(abs(hex_dist-his_dist[taglist_pos])<10000)
+ {
+ flag_tag_distsmooth[taglist_pos] =1;
+ }else{
+ flag_tag_distsmooth[taglist_pos] =0;
+ }
if(abs(hex_dist-his_dist[taglist_pos])<dist_threshold||misdist_num[taglist_pos]>3)
{
@@ -1000,7 +1016,7 @@
{
g_Tagdist[taglist_pos]=hex_dist/10;
}else{
- g_Tagdist[taglist_pos]= 1;
+ g_Tagdist[taglist_pos]= 999999;
}
#ifdef USART_SINGLE_OUTPUT
usart_send[2] = 1;//正常模式
@@ -1009,7 +1025,7 @@
memcpy(&usart_send[5],&tag_id_recv,2);
memcpy(&usart_send[7],&dev_id,2);
if(tagdist_list[taglist_pos]<=0)
- tagdist_list[taglist_pos]=10;
+ tagdist_list[taglist_pos]=999999;
memcpy(&usart_send[9],&tagdist_list[taglist_pos],4);
usart_send[13] = battary;
usart_send[14] = button;
--
Gitblit v1.9.3