From 5a0d34ccd87bf08fc9dcce08208c2b5f764fe804 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期四, 20 一月 2022 10:05:10 +0800
Subject: [PATCH] V1.59 测试完成 防撞汇总
---
源码/核心板/Src/application/dw_app.c | 94 +++++++++++++++++++++++++++++++++++++----------
1 files changed, 74 insertions(+), 20 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
index 20612af..d13d021 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
@@ -50,7 +50,7 @@
LPFilter_Frac* p_Dis_Filter; //测距用的低通滤波器
int32_t g_Tagdist[TAG_NUM_IN_SYS];
uint8_t g_flag_Taggetdist[256];
-
+extern u16 supergroupid;
static uint64_t get_tx_timestamp_u64(void)
{
uint8_t ts_tab[5];
@@ -316,8 +316,8 @@
u8 test=0;
u8 anclost_times=0;
u8 exsistbase_list[MAX_NEARBASE_NUM],report_num,get_newbase=0;
-u16 temp_sync_timer1,temp_sync_timer2;
-
+u16 temp_sync_timer1,temp_sync_timer2,rec_extratag_id;
+int32_t rec_extratag_dist;
void NearPoll(void)
{
static u8 mainbase_lost_count=0,flag_finalsend,flag_rxon;
@@ -399,7 +399,7 @@
dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
dwt_setrxtimeout(0);//DELAY_BETWEEN_TWO_FRAME_UUS*(nearbase_num+1-recbase_num)+10);//设定接收超时时间，0位没有超时时间
dwt_rxenable(0);//打开接收
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)&&rx_buffer[GROUP_ID_IDX] == group_id) //判断接收到的数据是否是response数据
+ if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)&&(rx_buffer[GROUP_ID_IDX]==supergroupid||rx_buffer[GROUP_ID_IDX] == group_id||group_id==supergroupid)) //判断接收到的数据是否是response数据
{ u16 rec_nearbaseid,rec_nearbasepos;
int32_t temp_dist;
poll_tx_ts = get_tx_timestamp_u64(); //获得POLL发送时间T1
@@ -443,7 +443,10 @@
// tyncpoll_time=(tagslotpos-1)*slottime;
////////////////////////////
rec_nearbasepos=0;
-
+
+ memcpy(&rec_extratag_id,&rx_buffer[EXTRA_TAGID_INDEX],2);
+ memcpy(&rec_extratag_dist,&rx_buffer[EXTRA_TAGDIST_INDEX],4);
+
memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
nearbase_distlist[rec_nearbasepos]=temp_dist;
if(temp_dist!=0x1ffff)
@@ -464,10 +467,10 @@
dwt_writetxdata(28+nearbase_num*4, tx_nearfinal_msg, 0);//将发送数据写入DW1000
dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
- if(temp_dist!=0x1ffff&&g_com_map[ALARM_DISTANCE1] == 1)
+ if(temp_dist!=0x1ffff)
{
g_Resttimer=0;
- IWDG_Feed();
+ IWDG_Feed();
#ifdef USART_SINGLE_OUTPUT
usart_send[2] = 1;//正常模式
usart_send[3] = 17;//数据段长度
@@ -487,11 +490,29 @@
memcpy(&usart_send[19],&checksum,2);
UART_PushFrame(usart_send,21);
#endif
-
- //dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
- // result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
- //dwt_writetxdata(4,&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4], FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4);//将发送数据写入DW1000
- }
+ }
+ if(rec_extratag_dist!=0x1ffff&&rec_extratag_dist!=0&&rx_buffer[GROUP_ID_IDX]!=supergroupid)
+ {
+ #ifdef USART_SINGLE_OUTPUT
+ usart_send[2] = 1;//正常模式
+ usart_send[3] = 17;//数据段长度
+ usart_send[4] = frame_seq_nb;//数据段长度
+ if(g_com_map[DEV_ROLE])
+ {
+ memcpy(&usart_send[5],&rec_extratag_id,2);
+ memcpy(&usart_send[7],&rec_nearbaseid,2);
+ }else{
+ memcpy(&usart_send[5],&rec_nearbaseid,2);
+ memcpy(&usart_send[7],&rec_extratag_id,2);
+ }
+ memcpy(&usart_send[9],&rec_extratag_dist,4);
+ usart_send[13] = battary;
+ usart_send[14] = button;
+ checksum = Checksum_u16(&usart_send[2],17);
+ memcpy(&usart_send[19],&checksum,2);
+ UART_PushFrame(usart_send,21);
+ #endif
+ }
}else{
@@ -503,7 +524,8 @@
nearbaseid_list[rec_nearbasepos] = rec_nearbaseid;
memcpy(&tx_nearfinal_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
}
-
+ memcpy(&rec_extratag_id,&rx_buffer[EXTRA_TAGID_INDEX],2);
+ memcpy(&rec_extratag_dist,&rx_buffer[EXTRA_TAGDIST_INDEX],4);
memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
nearbase_distlist[rec_nearbasepos]=temp_dist;
@@ -516,7 +538,7 @@
LED0_BLINK;
// memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
// tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
- if(temp_dist!=0x1ffff&&g_com_map[ALARM_DISTANCE1] == 1)
+ if(temp_dist!=0x1ffff)
{
#ifdef USART_SINGLE_OUTPUT
usart_send[2] = 1;//正常模式
@@ -542,6 +564,28 @@
// result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
//dwt_writetxdata(4,&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4], FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4);//将发送数据写入DW1000
}
+ if(rec_extratag_dist!=0x1ffff&&rec_extratag_dist!=0&&rx_buffer[GROUP_ID_IDX]!=supergroupid)
+ {
+ #ifdef USART_SINGLE_OUTPUT
+ usart_send[2] = 1;//正常模式
+ usart_send[3] = 17;//数据段长度
+ usart_send[4] = frame_seq_nb;//数据段长度
+ if(g_com_map[DEV_ROLE])
+ {
+ memcpy(&usart_send[5],&rec_extratag_id,2);
+ memcpy(&usart_send[7],&rec_nearbaseid,2);
+ }else{
+ memcpy(&usart_send[5],&rec_nearbaseid,2);
+ memcpy(&usart_send[7],&rec_extratag_id,2);
+ }
+ memcpy(&usart_send[9],&rec_extratag_dist,4);
+ usart_send[13] = battary;
+ usart_send[14] = button;
+ checksum = Checksum_u16(&usart_send[2],17);
+ memcpy(&usart_send[19],&checksum,2);
+ UART_PushFrame(usart_send,21);
+ #endif
+ }
}
}
}else{
@@ -902,7 +946,7 @@
}else{
memcpy(&tx_nearresp_msg[DIST_IDX], &tagdist_list[taglist_pos], 4);
}
- tx_nearresp_msg[GROUP_ID_IDX] = group_id;
+ tx_nearresp_msg[GROUP_ID_IDX] = group_id;
tx_nearresp_msg[MAINBASE_INDEX]=flag_syncbase;
tx_nearresp_msg[MESSAGE_TYPE_IDX]=NEAR_RESPONSE;
tx_nearresp_msg[MOTORSTATE_INDEX]=(remotesend_state<<4)|motorstate;
@@ -912,8 +956,18 @@
dwt_writetxdata(22+REMOTEPARA_LEN, tx_nearresp_msg, 0);//写入发送数据
dwt_writetxfctrl(22+REMOTEPARA_LEN, 0);//设定发送长度
}else{
- dwt_writetxdata(22, tx_nearresp_msg, 0);//写入发送数据
- dwt_writetxfctrl(22, 0);//设定发送长度
+ if(taglist_pos==1)
+ {
+ memcpy(&tx_nearresp_msg[EXTRA_TAGID_INDEX], &tagid_list[0], 2);
+ memcpy(&tx_nearresp_msg[EXTRA_TAGDIST_INDEX], &tagdist_list[0], 4);
+ }
+ if(taglist_pos==0)
+ {
+ memcpy(&tx_nearresp_msg[EXTRA_TAGID_INDEX], &tagid_list[1], 2);
+ memcpy(&tx_nearresp_msg[EXTRA_TAGDIST_INDEX], &tagdist_list[1], 4);
+ }
+ dwt_writetxdata(28, tx_nearresp_msg, 0);//写入发送数据
+ dwt_writetxfctrl(28, 0);//设定发送长度
}
result = dwt_starttx(DWT_START_TX_DELAYED | DWT_RESPONSE_EXPECTED);//延迟发送，等待接收
@@ -936,13 +990,13 @@
{
return 1;
}
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_FINAL&&!memcmp(&rx_buffer[TAG_ID_IDX],&tag_id_recv,2)&&group_id==rx_buffer[GROUP_ID_IDX]) //判断是否为Final包
+ if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_FINAL&&!memcmp(&rx_buffer[TAG_ID_IDX],&tag_id_recv,2)&&(rx_buffer[GROUP_ID_IDX]==supergroupid||rx_buffer[GROUP_ID_IDX] == group_id||group_id==supergroupid)) //判断是否为Final包
{
uint32_t poll_tx_ts, resp_rx_ts, final_tx_ts;
uint32_t poll_rx_ts_32, resp_tx_ts_32, final_rx_ts_32;
double Ra, Rb, Da, Db;
int64_t tof_dtu;
- u8 si;
+ u8 si;
resp_tx_ts = get_tx_timestamp_u64();//获得response发送时间T3
final_rx_ts = get_rx_timestamp_u64();//获得final接收时间T6
final_msg_get_ts(&rx_buffer[FINAL_MSG_POLL_TX_TS_IDX], &poll_tx_ts);//从接收数据中读取T1，T4，T5
@@ -1069,7 +1123,7 @@
memcpy(&anc_id_recv,&rx_buffer[ANCHOR_ID_IDX],2);
//将收到的tag_id分别写入各次通讯的包中，为多标签通讯服务，防止一次通讯中接收到不同ID标签的数据
memcpy(&tag_id_recv,&rx_buffer[TAG_ID_IDX],2);
- if(group_id==rx_buffer[GROUP_ID_IDX])
+ if((rx_buffer[GROUP_ID_IDX]==supergroupid||rx_buffer[GROUP_ID_IDX] == group_id||group_id==supergroupid))
{
switch(rx_buffer[MESSAGE_TYPE_IDX])
{
--
Gitblit v1.9.3