From 6e7d484264afa951a0491cb4a868580a2f0b647b Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期三, 25 八月 2021 15:05:24 +0800
Subject: [PATCH] map表检查
---
源码/核心板/Src/main.c | 252 +++++++++++++++++++++++++++++++-------------------
1 files changed, 155 insertions(+), 97 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index d271c2c..bf4e8de 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -6,40 +6,123 @@
#include "beep.h"
#include "dw_driver.h"
#include "dw_app.h"
-#include "filters.h"
#include "stm32f10x_it.h"
#include "serial_at_cmd_app.h"
+#include "global_param.h"
+#include "ADC.h"
+#include "modbus.h"
#include "deca_device_api.h"
-
-#define WORK_MODE_TAG
-//#define WORK_MODE_ANCHOR
-#define START_ALARM_DIST_CM 200
-#define BEEM_ON_TIME_MS 200
-
-float dis_after_filter = 500;
-
+#include "Flash.h"
+//#define DEBUG_MODE
void Device_Init(void)
{
-// Rcc_Init();
- SystemInit();
+ RCC_Configuration();
+ //SystemInit();
+ NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
Nvic_Init();
- Systick_Init();
-#ifdef WORK_MODE_TAG
- RTC_Configuration();
-#endif
+// Systick_Init();
+ TIM3_Int_Init();
Led_Init();
Beep_Init();
DW_GPIO_Init();
Uart1_Init();
Spi_Init();
-
+ ADC_Configuration();
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
}
-
-void Parameter_Init(void)
+u8 anchor_type;
+u32 dev_id;
+u8 hbsend[16];
+void HeartBeatInit(void)
{
+ u16 checksum;
+ hbsend[0]=0x55;
+ hbsend[1]=0xAA;
+ hbsend[2]=0x2;
+ hbsend[3]=0xc;
+ memcpy(&hbsend[4],&g_com_map[DEV_ID],2);
+ checksum = Checksum_u16(&hbsend[2],12);
+ memcpy(&hbsend[14],&checksum,2);
+}
+u16 tyncpoll_time;
+TrackingDiffClass *pUWBDistanceTrackingDiff;
+u8 group_id,sync_mainbase=0,synclost_timer=0;
+uint16_t vel_factor,pos_factor;
+
+extern u8 module_power;
+u16 slottime,max_slotnum,current_slotpos,dist_threshold;
+void Program_Init(void)
+{uint16_t i;
+ float temp;
+ u16 temp2;
Usart1ParseDataCallback = UsartParseDataHandler;
+ parameter_init();
+ //deca_sleep(1000);
+ HeartBeatInit();
+// g_com_map[DEV_ROLE]=1;
+// g_com_map[DEV_ID]=1;
+// g_com_map[COM_INTERVAL]=10;
+ OUT485_ENABLE;
+
+#ifdef DEBUG_MODE
+
+// g_com_map[COM_INTERVAL]=50;
+// g_com_map[MAX_REPORT_ANC_NUM]=3;
+// g_com_map[DEV_ID]=1;
+// g_com_map[ANC_POLL]=0;
+// g_com_map[ALARM_DISTANCE1]=100;
+ g_com_map[FILTER_COEFFICIENT]=12;
+#endif
+ //pUWBDistanceTrackingDiff = NewTrackingDiffClass(2, 4, 0.03);
+ dev_id = g_com_map[DEV_ID];
+ group_id=g_com_map[GROUP_ID];
+ vel_factor=g_com_map[FILTER_COEFFICIENT];
+ pos_factor=g_com_map[FILTER_COEFFICIENT];
+ dist_threshold = (g_com_map[SPEEDFILTER_THRES]*10)/(1000/g_com_map[COM_INTERVAL]);
+ if(dist_threshold<300)
+ {dist_threshold = 300;}
+ if(dist_threshold>15000)
+ {dist_threshold = 15000;}
+ if(dev_id==0)
+ sync_mainbase=1;
+ module_power = g_com_map[POWER];
+ if(module_power>67)
+ {
+ module_power=67;
+ }
+ g_com_map[VERSION] = 0x012e;
+ g_com_map[SW_TYPE] = SW_MODBUS;
+ temp=(float)g_com_map[MAX_REPORT_ANC_NUM]*4/3;
+ temp2=g_com_map[MAX_REPORT_ANC_NUM]*4/3;
+ if(temp2<temp)
+ {
+ temp2++;
+ }
+ slottime=temp2;
+ max_slotnum=g_com_map[COM_INTERVAL]/temp2;
+ current_slotpos=g_com_map[DEV_ID];
+ tyncpoll_time=(current_slotpos%max_slotnum)*slottime;
+ if(g_com_map[DEV_ROLE])
+ {
+ printf("标签ID: %d .\r\n",dev_id);
+ printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
+ printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
+ }else{
+ anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
+ printf("基站ID: %x .\r\n",dev_id);
+ printf("基站类型: %c .\r\n",anchor_type+0x41);
+ printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
+ }
+ OUT485_DISABLE;
+// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
+// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
+
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
+ for(i=0;i<255;i++)
+ {
+ g_Tagdist[i]=0xffff;
+ }
}
/*! ------------------------------------------------------------------------------------------------------------------
@@ -51,94 +134,69 @@
*
* @return none
*/
-extern uint8_t send_start;
+void HeatBeat(void)
+{
+UART_PushFrame(hbsend,16);
+}
+extern u8 g_start_sync_flag;
+u16 heartbeat_timer,poll_timer,sync_timer;
+void IdleTask(void)
+{
+ g_start_sync_flag=0;
+ UART_CheckReceive();
+ UART_CheckSend();
+ if( memcmp(g_com_map2,g_com_map,COM_MAP_SIZE)!=0)
+ {
+ SendAnchorState(SM_MAPERROR);
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(heartbeat_timer>1000)
+ {
+ heartbeat_timer=0;
+ if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
+ HeatBeat();
+ }
+
+ }
+uint16_t temp;
+float dw_vbat;
int main(void)
{
- LPFilter_Frac* p_Dis_Filter;
-
Device_Init();
- Parameter_Init();
+ Program_Init();
Dw1000_Init();
- p_Dis_Filter = New_LP_Frac(0.7);
-
- #ifdef WORK_MODE_TAG
- dwt_configuresleep(0x940, 0x7);
- _dwt_aonarrayupload();
- //dwt_entersleep();
- #endif
-
+ delay_ms(10);
+ Dw1000_App_Init();
/* Loop forever initiating ranging exchanges. */
+ RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
+ usart_send[0]=0x55;
+ usart_send[1]=0xAA;
+ Modbus_RegMap();
while(1)
{
-#ifdef WORK_MODE_TAG
-
- if(send_start)
- {send_start=0;
+ if(g_com_map[0] != 0x55AA)
+ {
+ while(1)
+ IdleTask();
+ }
+ if(g_start_send_flag)
+ {
+ g_start_send_flag = 0;
+ temp=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp&0xff)-173)/173+3.3;
+ if(dw_vbat>2.8)
Tag_App();
- }
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR,ENABLE);
-PWR_EnterSTOPMode(PWR_Regulator_LowPower,PWR_STOPEntry_WFI);
-#else
+ }//else{
+ IdleTask();
+// }
+//
+if(g_com_map[DEV_ROLE]==0)
Anchor_App();
-
-#endif
-
- //除UWB之外的其他代码...
- dis_after_filter = LP_Frac_Update(p_Dis_Filter, dist_cm);
-
- if(dis_after_filter <= g_alarm_dist)
- {
-// g_beep_off_time = (uint32_t)dis_after_filter * 10;
-// if(g_beep_off_time <= 0)
-// g_beep_off_time = 0;
-// g_beep_on_time = BEEM_ON_TIME_MS;
- switch(g_alarm_dev)
- {
- case 0:
- BEEP2_ON;
- BEEP_OFF;
- OUT2_OFF;
- break;
- case 1:
- BEEP_ON;
- BEEP2_OFF;
- OUT2_OFF;
- break;
- case 2:
- OUT2_ON;
- BEEP_OFF;
- BEEP2_OFF;
- break;
- default:
- BEEP2_ON;
- BEEP_ON;
- OUT2_ON;
- break;
- }
- }
- else
- {
-// g_beep_on_time = 0;
-// g_beep_off_time = 0;
- switch(g_alarm_dev)
- {
- case 0:
- BEEP2_OFF;
- break;
- case 1:
- BEEP_OFF;
- break;
- case 2:
- OUT2_OFF;
- break;
- default:
- BEEP2_OFF;
- BEEP_OFF;
- OUT2_OFF;
- break;
- }
- }
-
}
--
Gitblit v1.9.3