From 7fb3818d7bdae672c6df22c94698ce9c7c629e56 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期六, 12 九月 2020 17:25:34 +0800
Subject: [PATCH] V1.28 三一
---
源码/核心板/Src/OnChipDevices/Usart.c | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/OnChipDevices/Usart.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/OnChipDevices/Usart.c"
index 0718116..e208c34 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/OnChipDevices/Usart.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/OnChipDevices/Usart.c"
@@ -17,7 +17,6 @@
volatile uint8_t m_bEUARTTxEn = 0; //使能发送
void (*Usart1ParseDataCallback)(uint8_t);
-
void Usart1InitVariables(void)
{
m_EUART_TxFrm_FreeFrmLen = EUART_TX_FRM_SIZE-1;
@@ -83,7 +82,7 @@
//初始化管脚
GPIO_InitStructure.GPIO_Pin = EU_RX_PIN;
- GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; //Rx上拉输入
+ GPIO_InitStructure.GPIO_Mode =GPIO_Mode_IN_FLOATING; //Rx上拉输入
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(EU_RX_GPIO, &GPIO_InitStructure);
@@ -94,7 +93,7 @@
GPIO_InitStructure.GPIO_Pin = EU_485_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; //Tx推挽复用输出 GPIO_Mode_AF_PP
GPIO_Init(EU_485_GPIO, &GPIO_InitStructure);
-
+ OUT485_DISABLE;
#ifdef UART_GPIO_REMAP_ENABLE
GPIO_PinRemapConfig(UART_GPIO_REMAP, ENABLE);
#endif
@@ -143,6 +142,7 @@
while( m_EUART_DMA_RXPtr != DMACnt && MaxDataLen > 0)
{
Usart1ParseDataCallback(m_EUART_DMA_RXBuf[m_EUART_DMA_RXPtr]);
+ delay_us(10);
m_EUART_DMA_RXPtr++;
if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
{
@@ -190,10 +190,12 @@
m_bEUARTCheckingSend = 0;
return;
}
- OUT485_ENABLE;
+
if(!m_bEUARTTxEn)
{
m_bEUARTTxEn = 1;
+ OUT485_ENABLE;
+ delay_us(10);
// temp32 = GPIOC->CRH; //C10复用推挽输出
// temp32 &= ~(0x00000000F<<8);
// temp32 |= (0x000000009<<8);
--
Gitblit v1.9.3