From 92ffaba03621e312b0620f22cd1f184522ee8f3e Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期六, 22 六月 2019 16:21:20 +0800
Subject: [PATCH] 32位ID
---
源码/核心板/Src/application/dw_app.c | 147 ++++++++++++++++++++++++++++++++++++------------
1 files changed, 109 insertions(+), 38 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
index 26e7402..7a0a4fc 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
@@ -31,7 +31,7 @@
#include "global_param.h"
#include "filters.h"
#include <stdio.h>
-
+#include "beep.h"
/*------------------------------------ Marcos ------------------------------------------*/
@@ -64,7 +64,6 @@
#define SPEED_OF_LIGHT 299702547
/* Indexes to access some of the fields in the frames defined above. */
-#define ALL_MSG_SN_IDX 2
#define FINAL_MSG_POLL_TX_TS_IDX 10
#define FINAL_MSG_RESP_RX_TS_IDX 14
#define FINAL_MSG_FINAL_TX_TS_IDX 18
@@ -72,9 +71,12 @@
#define GROUP_ID_IDX 0
#define ANCHOR_ID_IDX 1
-#define TAG_ID_IDX 3
-#define MESSAGE_TYPE_IDX 5
-#define DIST_IDX 6
+#define TAG_ID_IDX 5
+#define MESSAGE_TYPE_IDX 9
+#define DIST_IDX 10
+#define ANC_TYPE_IDX 14
+#define BATTARY_IDX 15
+#define BUTTON_IDX 16
#define POLL 0x01
#define RESPONSE 0x02
@@ -83,7 +85,7 @@
/*------------------------------------ Variables ------------------------------------------*/
/* Default communication configuration. We use here EVK1000's default mode (mode 3). */
static dwt_config_t config = {
- 5, /* Channel number. */
+ 2, /* Channel number. */
DWT_PRF_64M, /* Pulse repetition frequency. */
DWT_PLEN_128, /* Preamble length. */
DWT_PAC8, /* Preamble acquisition chunk size. Used in RX only. */
@@ -96,7 +98,7 @@
};
/* Frames used in the ranging process. See NOTE 2 below. */
-static uint8_t tx_poll_msg[] = {0x00, 0x88, 0, 0xCA, 0xDE, 'W', 'A', 'V', 'E', 0x21, 0, 0};
+static uint8_t tx_poll_msg[18] = {0};
//static uint8_t rx_resp_msg[] = {0x41, 0x88, 0, 0xCA, 0xDE, 'V', 'E', 'W', 'A', 0x10, 0x02, 0, 0, 0, 0};
static uint8_t tx_final_msg[] = {0x41, 0x88, 0, 0xCA, 0xDE, 'W', 'A', 'V', 'E', 0x23, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
@@ -129,8 +131,8 @@
static double tof;
uint16_t anchor_dist_last_frm[TAG_NUM_IN_SYS];
-uint8_t tag_id = 0;
-uint8_t tag_id_recv = 0;
+uint32_t tag_id = 0;
+uint32_t tag_id_recv = 0;
uint8_t random_delay_tim = 0;
double distance, dist_no_bias, dist_cm;
@@ -139,7 +141,7 @@
float dis_after_filter; //当前距离值
LPFilter_Frac* p_Dis_Filter; //测距用的低通滤波器
-uint16_t g_Tagdist[256];
+uint16_t g_Tagdist[TOTAL_TAG_NUM];
uint8_t g_flag_Taggetdist[256];
/*------------------------------------ Functions ------------------------------------------*/
@@ -264,13 +266,13 @@
}
void Dw1000_App_Init(void)
{
-// g_com_map[DEV_ID] = 0x02;
+//g_com_map[DEV_ID] = 0x0b;
tx_poll_msg[MESSAGE_TYPE_IDX]=POLL;
tx_resp_msg[MESSAGE_TYPE_IDX]=RESPONSE;
tx_final_msg[MESSAGE_TYPE_IDX]=FINAL;
- memcpy(&tx_poll_msg[TAG_ID_IDX], &g_com_map[DEV_ID], 2);
- memcpy(&tx_final_msg[TAG_ID_IDX], &g_com_map[DEV_ID], 2);
- memcpy(&tx_resp_msg[ANCHOR_ID_IDX], &g_com_map[DEV_ID], 2);
+ memcpy(&tx_poll_msg[TAG_ID_IDX], &dev_id, 4);
+ memcpy(&tx_final_msg[TAG_ID_IDX], &dev_id, 4);
+ memcpy(&tx_resp_msg[ANCHOR_ID_IDX], &dev_id, 4);
}
void tag_sleep_configuraion(void)
@@ -278,31 +280,47 @@
dwt_configuresleep(0x940, 0x7);
dwt_entersleep();
}
+uint16_t g_Resttimer;
uint8_t result;
+u8 tag_succ_times=0;
void Tag_App(void)//发送模式(TAG标签)
{
uint32_t frame_len;
uint32_t final_tx_time;
+ u32 start_poll;
+ u8 i;
+ g_Resttimer=0;
+ UART_CheckReceive();
GPIO_ResetBits(SPIx_GPIO, SPIx_CS);
delay_us(2500);
GPIO_SetBits(SPIx_GPIO, SPIx_CS);
-
+ tag_succ_times = 0;
+ for(i=0;i<REPOET_ANC_NUM;i++)
+ {
/* Write frame data to DW1000 and prepare transmission. See NOTE 7 below. */
- tx_poll_msg[ALL_MSG_SN_IDX] = frame_seq_nb;
+ tx_poll_msg[ANC_TYPE_IDX] = i;
+
dwt_writetxdata(sizeof(tx_poll_msg), tx_poll_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
dwt_writetxfctrl(sizeof(tx_poll_msg), 0);//设置超宽带发送数据长度
/* Start transmission, indicating that a response is expected so that reception is enabled automatically after the frame is sent and the delay
* set by dwt_setrxaftertxdelay() has elapsed. */
dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
-
+ start_poll = time32_incr;
/* We assume that the transmission is achieved correctly, poll for reception of a frame or error/timeout. See NOTE 8 below. */
while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
- { };
+ { if(time32_incr - start_poll>20)
+ NVIC_SystemReset();
+
+ };
/* Increment frame sequence number after transmission of the poll message (modulo 256). */
frame_seq_nb++;
+ if(status_reg==0xffffffff)
+ {
+ NVIC_SystemReset();
+ }
if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
{
@@ -317,8 +335,8 @@
/* Check that the frame is the expected response from the companion "DS TWR responder" example.
* As the sequence number field of the frame is not relevant, it is cleared to simplify the validation of the frame. */
- rx_buffer[ALL_MSG_SN_IDX] = 0;
- if (rx_buffer[MESSAGE_TYPE_IDX] == RESPONSE) //判断接收到的数据是否是response数据
+
+ if (rx_buffer[MESSAGE_TYPE_IDX] == RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,4)) //判断接收到的数据是否是response数据
{
/* Retrieve poll transmission and response reception timestamp. */
poll_tx_ts = get_tx_timestamp_u64(); //获得POLL发送时间T1
@@ -339,11 +357,12 @@
final_msg_set_ts(&tx_final_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
/* Write and send final message. See NOTE 7 below. */
- tx_final_msg[ALL_MSG_SN_IDX] = frame_seq_nb;
+
dwt_writetxdata(sizeof(tx_final_msg), tx_final_msg, 0);//将发送数据写入DW1000
dwt_writetxfctrl(sizeof(tx_final_msg), 0);//设定发送数据长度
result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
+ tag_succ_times++;
/* Poll DW1000 until TX frame sent event set. See NOTE 8 below. */
if(result==0)
@@ -354,7 +373,7 @@
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_TXFRS);//清除标志位
/* Increment frame sequence number after transmission of the final message (modulo 256). */
- frame_seq_nb++;
+ frame_seq_nb++;
random_delay_tim = 0;
}
else
@@ -368,12 +387,34 @@
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR);
random_delay_tim = DFT_RAND_DLY_TIM_MS;
}
+// deca_sleep(10);
+}
+ if(tag_succ_times!=REPOET_ANC_NUM)
+ {
+ random_delay_tim =time32_incr&0x8f+7;
+ }else{
+ random_delay_tim=0;
+ }
LED0_BLINK;
+ deca_sleep(random_delay_tim);
+ RTC_SET_ALARM(1);
/* Execute a delay between ranging exchanges. */
dwt_entersleep();
-
}
-uint16_t g_Resttimer;
+uint16_t Checksum_u16(uint8_t* pdata, uint32_t len)
+{
+ uint16_t sum = 0;
+ uint32_t i;
+ for(i=0; i<len; i++)
+ sum += pdata[i];
+ sum = ~sum;
+ return sum;
+}
+
+u16 tag_time_recv[TOTAL_TAG_NUM];
+u8 usart_send[25];
+u8 battary,button;
+extern uint8_t g_pairstart;
void Anchor_App(void)
{
uint32_t frame_len;
@@ -394,7 +435,7 @@
};
if (status_reg & SYS_STATUS_RXFCG)//成功接收
- {
+ { u16 tag_recv_interval;
/* Clear good RX frame event in the DW1000 status register. */
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG);//清除标志位
@@ -406,14 +447,20 @@
/* Check that the frame is a poll sent by "DS TWR initiator" example.
* As the sequence number field of the frame is not relevant, it is cleared to simplify the validation of the frame. */
- rx_buffer[ALL_MSG_SN_IDX] = 0;
+
//将收到的tag_id分别写入各次通讯的包中，为多标签通讯服务，防止一次通讯中接收到不同ID标签的数据
- tag_id_recv = rx_buffer[TAG_ID_IDX];
- tx_resp_msg[TAG_ID_IDX] = tag_id_recv;
-
+ //tag_id_recv = rx_buffer[TAG_ID_IDX];
+ memcpy(&tag_id_recv,&rx_buffer[TAG_ID_IDX],4);
+ memcpy(&tx_resp_msg[TAG_ID_IDX],&tag_id_recv,4);
+ //tx_resp_msg[TAG_ID_IDX] = tag_id_recv;
+// if(tag_recv_timer>tag_time_recv[tag_id_recv-TAG_ID_START])
+// { tag_recv_interval = tag_recv_timer - tag_time_recv[tag_id_recv];
+// }else{
+// tag_recv_interval = tag_recv_timer + 65535 - tag_time_recv[tag_id_recv];
+// }
- if (rx_buffer[MESSAGE_TYPE_IDX] == POLL&&tag_id_recv!= g_com_map[DEV_ID]) //判断是否是poll包数据
+ if (rx_buffer[MESSAGE_TYPE_IDX] == POLL&&(anchor_type == rx_buffer[ANC_TYPE_IDX])) //判断是否是poll包数据
{
/* Retrieve poll reception timestamp. */
poll_rx_ts = get_rx_timestamp_u64();//获得Poll包接收时间T2
@@ -428,7 +475,7 @@
/* Write and send the response message. See NOTE 9 below.*/
memcpy(&tx_resp_msg[DIST_IDX], &anchor_dist_last_frm[tag_id_recv], 2);
- tx_resp_msg[ALL_MSG_SN_IDX] = frame_seq_nb;
+
dwt_writetxdata(sizeof(tx_resp_msg), tx_resp_msg, 0);//写入发送数据
dwt_writetxfctrl(sizeof(tx_resp_msg), 0);//设定发送长度
result = dwt_starttx(DWT_START_TX_DELAYED | DWT_RESPONSE_EXPECTED);//延迟发送，等待接收
@@ -456,14 +503,15 @@
/* Check that the frame is a final message sent by "DS TWR initiator" example.
* As the sequence number field of the frame is not used in this example, it can be zeroed to ease the validation of the frame. */
- rx_buffer[ALL_MSG_SN_IDX] = 0;
- if (rx_buffer[MESSAGE_TYPE_IDX] == FINAL&&rx_buffer[TAG_ID_IDX]==tag_id_recv&&rx_buffer[ANCHOR_ID_IDX]==g_com_map[DEV_ID]) //判断是否为Final包
+
+ if (rx_buffer[MESSAGE_TYPE_IDX] == FINAL&&!memcmp(&rx_buffer[TAG_ID_IDX],&tag_id_recv,4)&&!memcmp(&rx_buffer[ANCHOR_ID_IDX],&dev_id,4)) //判断是否为Final包
{
uint32_t poll_tx_ts, resp_rx_ts, final_tx_ts;
uint32_t poll_rx_ts_32, resp_tx_ts_32, final_rx_ts_32;
double Ra, Rb, Da, Db;
int64_t tof_dtu;
-
+ u32 hex_dist;
+ u16 checksum;
/* Retrieve response transmission and final reception timestamps. */
resp_tx_ts = get_tx_timestamp_u64();//获得response发送时间T3
final_rx_ts = get_rx_timestamp_u64();//获得final接收时间T6
@@ -494,15 +542,38 @@
LED0_BLINK; //每成功一次通讯则闪烁一次
g_UWB_com_interval = 0;
dis_after_filter=dist_cm;
- g_Tagdist[tag_id_recv]=dist_cm;
+ // g_Tagdist[tag_id_recv-TAG_ID_START]=dist_cm;
+// if(g_pairstart==1&&dist_cm<20)
+// {
+// g_pairstart=0;
+// g_com_map[PAIR_ID]=tag_id_recv;
+// save_com_map_to_flash();
+// BEEP2_ON;
+// delay_ms(1000);
+// printf("Pair Finish PairID: %d. \r\n",g_com_map[PAIR_ID]);
+// }
+ // tag_time_recv[tag_id_recv] = tag_recv_timer;
g_flag_Taggetdist[tag_id_recv]=0;
+ #ifdef HEX_OUTPUT
+ usart_send[2] = frame_seq_nb;
+ //usart_send[6] = tag_id_recv;
+ //usart_send[8] = g_com_map[DEV_ID];
+ memcpy(&usart_send[3],&dev_id,4);
+ memcpy(&usart_send[7],&dev_id,4);
+ hex_dist = dist_cm;
+ memcpy(&usart_send[11],&hex_dist,4);
+ usart_send[15] = battary;
+ usart_send[16] = button;
+ checksum = Checksum_u16(&usart_send[2],19);
+ memcpy(&usart_send[20],&checksum,2);
+ UART_PushFrame(usart_send,23);
+ #else
printf("Anchor ID: %d, Tag ID: %d, Dist = %d cm\n", g_com_map[DEV_ID], tag_id_recv, (uint16_t)dis_after_filter);
+ #endif
//dis_after_filter = LP_Frac_Update(p_Dis_Filter, dist_cm);
}
- }
- else
- {
+ }else{
/* Clear RX error events in the DW1000 status register. */
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR);
}
--
Gitblit v1.9.3