From 942d685e55e3a58b6bcd7d0158765e9648b9373a Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期四, 28 十月 2021 22:16:01 +0800
Subject: [PATCH] 中断模式，配合时间片测试完成
---
源码/核心板/Src/main.c | 203 ++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 169 insertions(+), 34 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index d5ac21f..175b9b4 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -9,49 +9,127 @@
#include "stm32f10x_it.h"
#include "serial_at_cmd_app.h"
#include "global_param.h"
+#include "ADC.h"
-
+//#define DEBUG_MODE
void Device_Init(void)
{
RCC_Configuration();
//SystemInit();
- Nvic_Init();
- Systick_Init();
- Led_Init();
+ NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
+
+// Systick_Init();
+ TIM3_Int_Init();
+
Beep_Init();
DW_GPIO_Init();
Uart1_Init();
+ Uart2_Init();
Spi_Init();
-
-
+ ADC_Configuration();
+ Led_Init();
+ Nvic_Init();
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
}
u8 anchor_type;
u32 dev_id;
+u8 hbsend[16];
+void HeartBeatInit(void)
+{
+ u16 checksum;
+ hbsend[0]=0x55;
+ hbsend[1]=0xAA;
+ hbsend[2]=0x2;
+ hbsend[3]=0xc;
+ memcpy(&hbsend[4],&g_com_map[DEV_ID],2);
+ checksum = Checksum_u16(&hbsend[2],12);
+ memcpy(&hbsend[14],&checksum,2);
+}
+u16 tyncpoll_time;
+u16 slottime,max_slotpos;
+extern u8 module_power;
+extern u16 total_slotnum;
+void ComMapCheck(void)
+{
+ if(g_com_map[COM_INTERVAL]<10)
+ {
+ g_com_map[COM_INTERVAL]=500;
+ }
+ if(g_com_map[COM_INTERVAL]>1000)
+ {
+ g_com_map[COM_INTERVAL]=1000;
+ }
+ if(module_power>MAX_RFPOWER)
+ {module_power=MAX_RFPOWER;}
+ if(module_power<0)
+ {module_power=0;}
+// if(g_com_map[MAX_REPORT_ANC_NUM]>10)
+// {g_com_map[MAX_REPORT_ANC_NUM]=10;}
+// if(g_com_map[MAX_REPORT_ANC_NUM]<1)
+// {g_com_map[MAX_REPORT_ANC_NUM]=1;}
+ if(g_com_map[IMU_THRES]>10)
+ {g_com_map[IMU_THRES]=10;}
+ if(g_com_map[IMU_THRES]<1)
+ {g_com_map[IMU_THRES]=1;}
+}
+u16 decid;
void Program_Init(void)
-{uint16_t i;
+{ float temp;
+ u16 temp2;
+ uint16_t i;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
- dev_id = g_com_map[DEV_ID_H]<<16|g_com_map[DEV_ID_L];
- #ifdef WORK_MODE_TAG
+ //deca_sleep(1000);
+ HeartBeatInit();
+#ifdef DEBUG_MODE
+// g_com_map[DEV_ROLE]=1;
+// g_com_map[DEV_ID]=1;
+// g_com_map[COM_INTERVAL]=100;
+// g_com_map[MAX_REPORT_ANC_NUM]=3;
+// g_com_map[NEARBASE_NUM]=1;
+// g_com_map[NEARBASE_ID1]=2;
+// g_com_map[ANC_FLAG]=1;
+// save_com_map_to_flash();
+ g_com_map[BASESYNCSEQ]=1;
+ g_com_map[SYNCBASEID]=1;
+#endif
+ OUT485_ENABLE;
+ ComMapCheck();
+ g_com_map[VERSION] = 0x021e;
+ dev_id = g_com_map[DEV_ID];
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
+ max_slotpos=g_com_map[COM_INTERVAL]/slottime;
+ tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
+ module_power = g_com_map[POWER];
+ total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ decid = (g_com_map[DEV_ID]/0x1000)*1000+((g_com_map[DEV_ID]%0x1000)/0x100)*100+((g_com_map[DEV_ID]%0x100)/0x10)*10+((g_com_map[DEV_ID]%0x10));
+ anchor_type = decid%g_com_map[MAX_REPORT_ANC_NUM];
+
+
+
+ if(g_com_map[DEV_ROLE])
+ {
printf("标签ID: %d .\r\n",dev_id);
printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
- printf("单次通讯基站数量: %d个.\r\n",REPOET_ANC_NUM);
- #else
- anchor_type = dev_id%REPOET_ANC_NUM;
+ printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
+ }else{
+
printf("基站ID: %x .\r\n",dev_id);
printf("基站类型: %c .\r\n",anchor_type+0x41);
- printf("单次通讯基站数量: %d个.\r\n",REPOET_ANC_NUM);
-
+ printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
+ }
+ OUT485_DISABLE;
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
- #endif
-
+
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
for(i=0;i<255;i++)
{
- g_Tagdist[i]=0xffff;
+ g_Tagdist[i]=0x1ffff;
+ IdleTask();
}
+
}
/*! ------------------------------------------------------------------------------------------------------------------
@@ -63,37 +141,94 @@
*
* @return none
*/
+extern float GetPressAndHeight(void);
+extern u16 synclost_count;
+extern float Height;
+int32_t intheight;
+void HeatBeat(void)
+{ u16 checksum;
+ // GetPressAndHeight();
+ // intheight = Height*100;//+g_com_map[MAX_REPORT_ANC_NUM];
+ if(synclost_count>5)
+ {
+ hbsend[6] = 0;
+ }else{
+ hbsend[6] = 1;
+ }
+ if(intheight!=0)
+ intheight+=(int16_t)g_com_map[MAX_REPORT_ANC_NUM];
+ memcpy(&hbsend[7],&intheight,4);
+checksum = Checksum_u16(&hbsend[2],12);
+memcpy(&hbsend[14],&checksum,2);
+UART_PushFrame(hbsend,16);
+}
+extern u8 g_start_sync_flag,usart_send_flag,anc_report_num;
+u16 heartbeat_timer=58,poll_timer;
+int16_t sync_timer;
+extern u8 flag_newsecond, tagpos_rec[50], tagpos_send[50],ancidlist_num;
+uint32_t tagpos_binary;
+extern u16 ancidlist_rec[20],ancidlist_send[20];
+extern u16 target_time;
+void IdleTask(void)
+{
+
+ UART_CheckReceive();
+// UART_CheckSend();
+ UART2_CheckReceive();
+
+// if( memcmp(g_com_map2,g_com_map,COM_MAP_SIZE)!=0)
+// {
+// SendAnchorState(SM_MAPERROR);
+// delay_ms(100);
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+// }
+ if(heartbeat_timer>60)
+ {
+ heartbeat_timer=0;
+ if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
+ HeatBeat();
+ }
+// if(flag_newsecond)
+// {
+// flag_newsecond=0;
+// tagpos_binary=0;
+// memcpy(ancidlist_send,ancidlist_rec,ancidlist_num*2);
+// ancidlist_num=0;
+// for(u8 i=0;i<max_slotpos;i++)
+// {
+// if(tagpos_rec[i])
+// tagpos_binary|=1<<i;
+// tagpos_rec[i] = 0;
+// }
+// }
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ }
+extern u8 needanchorrx;
int main(void)
{
Device_Init();
Program_Init();
Dw1000_Init();
- delay_ms(10);
-#ifdef WORK_MODE_TAG
- RTC_Configuration(g_com_map[COM_INTERVAL]*20);
- tag_sleep_configuraion();
-#endif
+ BarInit();
+ delay_ms(10);
Dw1000_App_Init();
/* Loop forever initiating ranging exchanges. */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
usart_send[0]=0x55;
usart_send[1]=0xAA;
+ usart_send_anc[0]=0x55;
+ usart_send_anc[1]=0xAA;
+ dwt_setrxtimeout(0);//设定接收超时时间，0位没有超时时间
+ dwt_rxenable(0);//打开接收
+ //SendComMap(50, 0);
while(1)
{
-#ifdef WORK_MODE_TAG
- if(g_start_send_flag)
- {
- g_start_send_flag = 0;
- Tag_App();
- }
-// UART_CheckReceive();
- PWR_EnterSTOPMode(PWR_Regulator_LowPower, PWR_STOPEntry_WFI);
-#else
- Anchor_App();
-#endif
-
+ IdleTask();
}
}
--
Gitblit v1.9.3