From 9c28e7574073507108daa81009443bd4963ca380 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期五, 03 十二月 2021 15:04:00 +0800
Subject: [PATCH] 修改注册标签记录容量
---
源码/核心板/Src/main.c | 58 ++++++++++++++++++++++++++--------------------------------
1 files changed, 26 insertions(+), 32 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index 7e1f98c..d9e3ec8 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -18,7 +18,7 @@
RCC_Configuration();
//SystemInit();
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
- Nvic_Init();
+
// Systick_Init();
TIM3_Int_Init();
@@ -29,6 +29,7 @@
Spi_Init();
ADC_Configuration();
Led_Init();
+ Nvic_Init();
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
}
u8 anchor_type;
@@ -72,6 +73,7 @@
if(g_com_map[IMU_THRES]<1)
{g_com_map[IMU_THRES]=1;}
}
+u16 decid;
void Program_Init(void)
{ float temp;
u16 temp2;
@@ -94,14 +96,15 @@
#endif
OUT485_ENABLE;
ComMapCheck();
- g_com_map[VERSION] = 0x021a;
+ g_com_map[VERSION] = 0x022c;
dev_id = g_com_map[DEV_ID];
slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
module_power = g_com_map[POWER];
total_slotnum = 1000/g_com_map[COM_INTERVAL];
- anchor_type = dev_id%3;
+ decid = (g_com_map[DEV_ID]/0x1000)*1000+((g_com_map[DEV_ID]%0x1000)/0x100)*100+((g_com_map[DEV_ID]%0x100)/0x10)*10+((g_com_map[DEV_ID]%0x10));
+ anchor_type = decid%g_com_map[MAX_REPORT_ANC_NUM];
@@ -144,8 +147,8 @@
int32_t intheight;
void HeatBeat(void)
{ u16 checksum;
- GetPressAndHeight();
- intheight = Height*100;//+g_com_map[MAX_REPORT_ANC_NUM];
+ // GetPressAndHeight();
+ // intheight = Height*100;//+g_com_map[MAX_REPORT_ANC_NUM];
if(synclost_count>5)
{
hbsend[6] = 0;
@@ -159,8 +162,14 @@
memcpy(&hbsend[14],&checksum,2);
UART_PushFrame(hbsend,16);
}
+u32 onesecondtimer;
+void OneSecondTask(void)
+{
+ TagListUpdate();
+ TagDistClear();
+}
extern u8 g_start_sync_flag,usart_send_flag,anc_report_num;
-u16 heartbeat_timer,poll_timer;
+u16 heartbeat_timer=58,poll_timer;
int16_t sync_timer;
extern u8 flag_newsecond, tagpos_rec[50], tagpos_send[50],ancidlist_num;
uint32_t tagpos_binary;
@@ -170,7 +179,7 @@
{
UART_CheckReceive();
- UART_CheckSend();
+// UART_CheckSend();
UART2_CheckReceive();
// if( memcmp(g_com_map2,g_com_map,COM_MAP_SIZE)!=0)
@@ -179,11 +188,16 @@
// delay_ms(100);
// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
// }
- if(heartbeat_timer>60000)
+ if(heartbeat_timer>60)
{
heartbeat_timer=0;
if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
HeatBeat();
+ }
+ if(time32_incr-onesecondtimer>=1000)
+ {
+ onesecondtimer = time32_incr;
+ OneSecondTask();
}
// if(flag_newsecond)
// {
@@ -198,26 +212,13 @@
// tagpos_rec[i] = 0;
// }
// }
- if(target_time>1000)
- {target_time-=1000;}
- #ifdef USART_INTEGRATE_OUTPUT
- if(g_com_map[DEV_ROLE]==0&&usart_send_flag)
- {u16 checksum;
- usart_send_flag=0;
- usart_send_anc[2] = 5;//正常模式
- usart_send_anc[3] = anc_report_num*6+2;//正常模式
- checksum = Checksum_u16(&usart_send_anc[2],anc_report_num*6+2);
- memcpy(&usart_send_anc[4+anc_report_num*6],&checksum,2);
- UART_PushFrame(usart_send_anc,6+anc_report_num*6);
- anc_report_num=0;
- }
- #endif
if(g_com_map[MAP_SIGN_INDEX]!=0x55AA)
{
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
}
+extern u8 needanchorrx;
int main(void)
{
@@ -233,19 +234,12 @@
usart_send[1]=0xAA;
usart_send_anc[0]=0x55;
usart_send_anc[1]=0xAA;
+ dwt_setrxtimeout(0);//设定接收超时时间，0位没有超时时间
+ dwt_rxenable(0);//打开接收
//SendComMap(50, 0);
while(1)
{
- g_start_sync_flag=0;
- if(g_start_send_flag)
- {
- g_start_send_flag = 0;
- Tag_App();
- }
- IdleTask();
-if(g_com_map[DEV_ROLE]!=1)
- Anchor_App();
-
+ IdleTask();
}
}
--
Gitblit v1.9.3