From 9d9408336b1ab3fd9b4b72b9af231d718485c845 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期二, 20 七月 2021 11:28:05 +0800
Subject: [PATCH] 增加数据连续性检测
---
源码/核心板/Src/main.c | 121 +++++++++++++++++++++++++++++++++-------
1 files changed, 100 insertions(+), 21 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index 78ab7a3..a1bab41 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -10,8 +10,10 @@
#include "serial_at_cmd_app.h"
#include "global_param.h"
#include "ADC.h"
-
-
+#include "modbus.h"
+#include "deca_device_api.h"
+#include "Flash.h"
+//#define DEBUG_MODE
void Device_Init(void)
{
RCC_Configuration();
@@ -44,29 +46,75 @@
memcpy(&hbsend[14],&checksum,2);
}
u16 tyncpoll_time;
+TrackingDiffClass *pUWBDistanceTrackingDiff;
+u8 group_id,sync_mainbase=0,synclost_timer=0;
+uint16_t vel_factor,pos_factor;
+
+extern u8 module_power;
+u16 slottime,max_slotnum,current_slotpos,dist_threshold;
void Program_Init(void)
{uint16_t i;
+ float temp;
+ u16 temp2;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
//deca_sleep(1000);
HeartBeatInit();
- dev_id = g_com_map[DEV_ID];
// g_com_map[DEV_ROLE]=1;
// g_com_map[DEV_ID]=1;
// g_com_map[COM_INTERVAL]=10;
+ OUT485_ENABLE;
+
+#ifdef DEBUG_MODE
+
+// g_com_map[COM_INTERVAL]=50;
+// g_com_map[MAX_REPORT_ANC_NUM]=3;
+// g_com_map[DEV_ID]=1;
+// g_com_map[ANC_POLL]=0;
+// g_com_map[ALARM_DISTANCE1]=100;
+ g_com_map[FILTER_COEFFICIENT]=12;
+#endif
+ //pUWBDistanceTrackingDiff = NewTrackingDiffClass(2, 4, 0.03);
+ dev_id = g_com_map[DEV_ID];
+ group_id=g_com_map[GROUP_ID];
+ vel_factor=g_com_map[FILTER_COEFFICIENT];
+ pos_factor=g_com_map[FILTER_COEFFICIENT];
+ dist_threshold = (g_com_map[SPEEDFILTER_THRES]*10)/(1000/g_com_map[COM_INTERVAL]);
+ if(dist_threshold<300)
+ {dist_threshold = 300;}
+ if(dist_threshold>15000)
+ {dist_threshold = 15000;}
+ if(dev_id==0)
+ sync_mainbase=1;
+ module_power = g_com_map[POWER];
+ if(module_power>67)
+ {
+ module_power=67;
+ }
+ g_com_map[VERSION] = 0x012c;
+ g_com_map[SW_TYPE] = SW_MODBUS;
+ temp=(float)g_com_map[MAX_REPORT_ANC_NUM]*4/3;
+ temp2=g_com_map[MAX_REPORT_ANC_NUM]*4/3;
+ if(temp2<temp)
+ {
+ temp2++;
+ }
+ slottime=temp2;
+ max_slotnum=g_com_map[COM_INTERVAL]/temp2;
+ current_slotpos=g_com_map[DEV_ID];
+ tyncpoll_time=(current_slotpos%max_slotnum)*slottime;
if(g_com_map[DEV_ROLE])
{
- tyncpoll_time=g_com_map[DEV_ID]*g_com_map[MAX_REPORT_ANC_NUM]*4/3;
printf("标签ID: %d .\r\n",dev_id);
printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
}else{
-
anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
printf("基站ID: %x .\r\n",dev_id);
printf("基站类型: %c .\r\n",anchor_type+0x41);
printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
}
+ OUT485_DISABLE;
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -106,44 +154,75 @@
if(g_com_map[CNT_UPDATE]==1)
{
- uint32_t result = 0;
+ uint32_t result = 0;
u16 tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 2);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ __disable_irq();
+ result = FLASH_Prepare(0x8004A38, 2);
+ if(result)
+ result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
+ __enable_irq();
+ printf("进入升级模式\r\n");
+ g_com_map[CNT_UPDATE]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
+ // Delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+// if(g_com_map[CNT_REBOOT]==1)
+// {
+// g_com_map[CNT_REBOOT]=0;
+// g_com_map[MAP_SIGN_INDEX]=0;
+// save_com_map_to_flash();
+// delay_ms(100);
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+// }
+ if(g_com_map[CNT_RESTART]==1)
+ {
+ g_com_map[CNT_RESTART]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
}
+uint16_t temp;
+float dw_vbat;
int main(void)
{
Device_Init();
Program_Init();
- //Dw1000_Init();
+ Dw1000_Init();
delay_ms(10);
Dw1000_App_Init();
/* Loop forever initiating ranging exchanges. */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
usart_send[0]=0x55;
usart_send[1]=0xAA;
- UART_PushFrame(hbsend,16);
+ Modbus_RegMap();
while(1)
{
- IdleTask();
+ if(g_com_map[0] != 0x55AA)
+ {
+ while(1)
+ IdleTask();
+ }
if(g_start_send_flag)
{
- g_start_send_flag = 0;
+ g_start_send_flag = 0;
+ temp=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp&0xff)-173)/173+3.3;
+ if(dw_vbat>2.8)
Tag_App();
- }
-
+ }//else{
+ IdleTask();
+// }
+//
if(g_com_map[DEV_ROLE]==0)
Anchor_App();
+
+
}
}
--
Gitblit v1.9.3