From abb80bb7ac0048e9bd26c122afca32c00d7be237 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期五, 10 十二月 2021 14:50:06 +0800
Subject: [PATCH] V1.58 增加信号强度输出
---
源码/核心板/Src/main.c | 132 +++++++++++++++++++++++++++++++++++--------
1 files changed, 107 insertions(+), 25 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index 014e391..b592840 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -2,6 +2,7 @@
#include "Rcc_Nvic_Systick.h"
#include "Usart.h"
#include "Spi.h"
+#include "Flash.h"
#include "led.h"
#include "beep.h"
#include "dw_driver.h"
@@ -12,7 +13,34 @@
#include "ADC.h"
//#define DEBUG_MODE
+/*
+ * rlv:重装载寄存器的值，取值范围为：0-0XFFF
+ * 函数调用举例：
+ * IWDG_Config(IWDG_Prescaler_64 ,625); // IWDG 1s 超时溢出
+ * （64/40）*625 = 1s
+ */
+void IWDG_Config(uint8_t prv ,uint16_t rlv)
+{
+ // 使能 预分频寄存器PR和重装载寄存器RLR可写
+ IWDG_WriteAccessCmd( IWDG_WriteAccess_Enable );
+
+ // 设置预分频器值
+ IWDG_SetPrescaler( prv );
+
+ // 设置重装载寄存器值
+ IWDG_SetReload( rlv );
+
+ // 把重装载寄存器的值放到计数器中
+ IWDG_ReloadCounter();
+
+ // 使能 IWDG
+ IWDG_Enable();
+}
+void IWDG_Feed(void)
+{
+ IWDG_ReloadCounter();
+}
void Device_Init(void)
{
RCC_Configuration();
@@ -27,7 +55,8 @@
Uart1_Init();
Spi_Init();
ADC_Configuration();
-
+ IWDG_Config(IWDG_Prescaler_128 ,4095); //10s
+ IWDG_Feed();
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
}
u8 anchor_type;
@@ -44,10 +73,34 @@
checksum = Checksum_u16(&hbsend[2],12);
memcpy(&hbsend[14],&checksum,2);
}
-u16 tyncpoll_time;
+
+uint16_t vel_factor,pos_factor;
+u16 tyncpoll_time,dist_threshold,group_id;
u16 slottime,max_slotpos;
extern u8 module_power;
extern u16 total_slotnum;
+void ComMapCheck(void)
+{
+
+ if(g_com_map[ANT_LENGTH]>10000)
+ {
+ g_com_map[ANT_LENGTH] = 0;
+ }
+ if(g_com_map[WAR_JDQ_TIME]>1000||g_com_map[WAR_JDQ_TIME]<0)
+ {
+ g_com_map[WAR_JDQ_TIME] = 1;
+ }
+ if(g_com_map[COM_INTERVAL]==0)
+ {
+ g_com_map[COM_INTERVAL]=100;
+ }
+ if(dist_threshold<300)
+ {dist_threshold = 300;}
+ if(dist_threshold>15000)
+ {dist_threshold = 15000;}
+}
+u16 JDQ_time;
+int16_t g_commap_antdelay;
void Program_Init(void)
{ float temp;
u16 temp2;
@@ -66,18 +119,48 @@
g_com_map[ANC_FLAG]=1;
save_com_map_to_flash();
#endif
+//
+// g_com_map[COM_INTERVAL]=100;
+// g_com_map[MAX_REPORT_ANC_NUM]=10;
+// g_com_map[GROUP_ID]=0;
+// g_com_map[DIST_OFFSET]=-116;
+
+// g_com_map[DEV_ROLE] =0x0; //基站
+//
+// g_com_map[ANC_POLL]=1;
+// g_com_map[ALARM_DEV] = 0;
+// g_com_map[ALARM_DISTANCE1] = 0; //默认报警距离50cm
+// g_com_map[ALARM_DISTANCE2] = 900; //默认报警距离50cm
+// g_com_map[ALARM_DISTANCE3] = 1400; //默认报警距离50cm
+// g_com_map[RELAY2_DISTANCE1] = 0; //默认报警距离50cm
+// g_com_map[RELAY2_DISTANCE2] = 900; //默认报警距离50cm
+// g_com_map[RELAY2_DISTANCE3] = 1400; //默认报警距离50cm
+// g_com_map[WAR_JDQ_TIME] = 1; //1秒
+// g_com_map[POWER]=30;
+// g_com_map[SPEEDFILTER_THRES]=10000;
+// g_com_map[FILTER_COEFFICIENT]=40;
+// g_com_map[ANT_LENGTH]=0;
+// g_com_map[NOMOVESLEEP_TIME]=728;
+
+
OUT485_ENABLE;
- if(g_com_map[COM_INTERVAL]==0)
- {
- g_com_map[COM_INTERVAL]=100;
- }
- g_com_map[VERSION] = 0x0121;
+ ComMapCheck();
+ g_com_map[VERSION] = 0x013a;
+ FLASH_Read(FLASH_HARDWARE_FLAG, (uint8_t*)&g_com_map[HARDWAREFLAG_INDEX], 16);
+ dist_threshold = (g_com_map[SPEEDFILTER_THRES]*10)/(1000/g_com_map[COM_INTERVAL]);
+ g_commap_antdelay = g_com_map[ANT_LENGTH];
+ JDQ_time = g_com_map[WAR_JDQ_TIME]*10;
+ g_com_map[SW_TYPE] = SW_FANGZHUANG;
dev_id = g_com_map[DEV_ID];
+ group_id=g_com_map[GROUP_ID];
slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
module_power = g_com_map[POWER];
total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ vel_factor=g_com_map[FILTER_COEFFICIENT];
+ pos_factor=g_com_map[FILTER_COEFFICIENT];
+
if(module_power>67)
{
module_power=67;
@@ -102,7 +185,7 @@
for(i=0;i<255;i++)
{
- g_Tagdist[i]=0xffff;
+ g_Tagdist[i]=0x1ffff;
}
}
@@ -146,21 +229,21 @@
if(heartbeat_timer>1000)
{
heartbeat_timer=0;
- if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
+ if(g_com_map[HEARTBEAT])
HeatBeat();
}
if(flag_newsecond)
{
uint32_t temp23;
- temp23 = dwt_read32bitreg(CHAN_CTRL_ID) ;
- if(temp23!=0x4A480022)
- {
- temp23 = dwt_read32bitreg(CHAN_CTRL_ID) ;
- if(temp23!=0x4A480022)
- {
- NVIC_SystemReset();
- }
- }
+// temp23 = dwt_read32bitreg(CHAN_CTRL_ID) ;
+// if(temp23!=0x4A480022)
+// {
+// temp23 = dwt_read32bitreg(CHAN_CTRL_ID) ;
+// if(temp23!=0x4A480022)
+// {
+// NVIC_SystemReset();
+// }
+// }
flag_newsecond=0;
tagpos_binary=0;
memcpy(ancidlist_send,ancidlist_rec,ancidlist_num*2);
@@ -203,12 +286,10 @@
// Delay_ms(100);
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
- if(g_com_map[CNT_REBOOT]==1)
+ if(g_com_map[CNT_REBOOT]==1)
{
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
+ FactorySettings();
+
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
if(g_com_map[CNT_RESTART]==1)
@@ -218,16 +299,17 @@
delay_ms(100);
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
- if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
{
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
}
+
int main(void)
{
- Device_Init();
+ Device_Init();
//StartUpTest();
Program_Init();
Dw1000_Init();
--
Gitblit v1.9.3