From ac5a474250f6560c7aa509b5e6c496c27a9db6d7 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期一, 05 十月 2020 18:54:00 +0800
Subject: [PATCH] 增加配置确认回复
---
源码/核心板/Src/main.c | 49 +++++++++++++++++++++++++++++++++++++++----------
1 files changed, 39 insertions(+), 10 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index eeb6ac9..635a5dd 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -48,6 +48,29 @@
u16 slottime,max_slotpos;
extern u8 module_power;
extern u16 total_slotnum;
+void ComMapCheck(void)
+{
+ if(g_com_map[COM_INTERVAL]<10)
+ {
+ g_com_map[COM_INTERVAL]=500;
+ }
+ if(g_com_map[COM_INTERVAL]>1000)
+ {
+ g_com_map[COM_INTERVAL]=1000;
+ }
+ if(module_power>67)
+ {module_power=67;}
+ if(module_power<0)
+ {module_power=0;}
+ if(g_com_map[MAX_REPORT_ANC_NUM]>10)
+ {g_com_map[MAX_REPORT_ANC_NUM]=10;}
+ if(g_com_map[MAX_REPORT_ANC_NUM]<1)
+ {g_com_map[MAX_REPORT_ANC_NUM]=1;}
+ if(g_com_map[IMU_THRES]>10)
+ {g_com_map[IMU_THRES]=10;}
+ if(g_com_map[IMU_THRES]<1)
+ {g_com_map[IMU_THRES]=1;}
+}
void Program_Init(void)
{ float temp;
u16 temp2;
@@ -67,18 +90,16 @@
save_com_map_to_flash();
#endif
OUT485_ENABLE;
- g_com_map[VERSION] = 0x0113;
+ ComMapCheck();
+ g_com_map[VERSION] = 0x0200;
dev_id = g_com_map[DEV_ID];
- slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*0.4)+2;
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
module_power = g_com_map[POWER];
total_slotnum = 1000/g_com_map[COM_INTERVAL];
- if(module_power>67)
- {
- module_power=67;
- }
-
+
+
if(g_com_map[DEV_ROLE])
{
printf("标签ID: %d .\r\n",dev_id);
@@ -121,6 +142,7 @@
extern u8 flag_newsecond, tagpos_rec[50], tagpos_send[50],ancidlist_num;
uint32_t tagpos_binary;
extern u16 ancidlist_rec[20],ancidlist_send[20];
+extern u16 target_time;
void IdleTask(void)
{
@@ -145,17 +167,20 @@
tagpos_rec[i] = 0;
}
}
-
+ if(target_time>1000)
+ {target_time-=1000;}
+ #ifdef USART_INTEGRATE_OUTPUT
if(g_com_map[DEV_ROLE]==0&&usart_send_flag)
{u16 checksum;
usart_send_flag=0;
- usart_send_anc[2] = 4;//正常模式
+ usart_send_anc[2] = 5;//正常模式
usart_send_anc[3] = anc_report_num*6+2;//正常模式
checksum = Checksum_u16(&usart_send_anc[2],anc_report_num*6+2);
memcpy(&usart_send_anc[4+anc_report_num*6],&checksum,2);
UART_PushFrame(usart_send_anc,6+anc_report_num*6);
anc_report_num=0;
}
+ #endif
if(g_com_map[CNT_UPDATE]==1)
{
uint32_t result = 0;
@@ -188,6 +213,10 @@
delay_ms(100);
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
}
int main(void)
@@ -204,7 +233,7 @@
usart_send[1]=0xAA;
usart_send_anc[0]=0x55;
usart_send_anc[1]=0xAA;
-
+ //SendComMap(50, 0);
while(1)
{
g_start_sync_flag=0;
--
Gitblit v1.9.3