From cba4dbb02fc442a8e238d2dabb389e1e5e8185f6 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期三, 13 十一月 2019 17:02:16 +0800
Subject: [PATCH] 测距异常值bug没找到原因
---
源码/核心板/Src/main.c | 52 ++++++++++++++++++++++++++++++----------------------
1 files changed, 30 insertions(+), 22 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index 3ed18c7..bc8497e 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -18,7 +18,8 @@
//SystemInit();
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
Nvic_Init();
- Systick_Init();
+// Systick_Init();
+ TIM3_Int_Init();
Led_Init();
Beep_Init();
DW_GPIO_Init();
@@ -42,24 +43,41 @@
checksum = Checksum_u16(&hbsend[2],12);
memcpy(&hbsend[14],&checksum,2);
}
+u16 tyncpoll_time;
void Program_Init(void)
{uint16_t i;
+ float temp;
+ u16 temp2;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
//deca_sleep(1000);
HeartBeatInit();
dev_id = g_com_map[DEV_ID];
+// g_com_map[DEV_ROLE]=1;
+// g_com_map[DEV_ID]=1;
+// g_com_map[COM_INTERVAL]=10;
+ OUT485_ENABLE;
+ g_com_map[VERSION] = 0x0109;
+ temp=(float)g_com_map[MAX_REPORT_ANC_NUM]*4/3;
+ temp2=g_com_map[DEV_ID]*g_com_map[MAX_REPORT_ANC_NUM]*4/3;
+ if(temp2<temp)
+ {
+ temp2++;
+ }
+ tyncpoll_time=g_com_map[DEV_ID]*(temp2);
if(g_com_map[DEV_ROLE])
{
printf("标签ID: %d .\r\n",dev_id);
printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
}else{
+
anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
printf("基站ID: %x .\r\n",dev_id);
printf("基站类型: %c .\r\n",anchor_type+0x41);
printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
}
+ OUT485_DISABLE;
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -96,24 +114,7 @@
if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
HeatBeat();
}
- if(poll_timer>=g_com_map[COM_INTERVAL]-tag_delaytime)
- {
- poll_timer=0;
- if(g_com_map[ANC_POLL]||g_com_map[DEV_ROLE])
- {
- if(g_com_map[DEV_ROLE]==0)
- {int8_t correction_time;
- correction_time=tag_timer-g_com_map[DEV_ID]*3;
- tag_delaytime=correction_time;
- if(tag_delaytime>g_com_map[COM_INTERVAL]/2)
- {
- tag_delaytime=tag_delaytime-g_com_map[COM_INTERVAL];
- }
- }
- g_start_send_flag=1;
- }
-
- }
+
if(g_com_map[CNT_UPDATE]==1)
{
uint32_t result = 0;
@@ -124,6 +125,9 @@
result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
__enable_irq();
printf("进入升级模式\r\n");
+ g_com_map[CNT_UPDATE]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
// STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
// Delay_ms(100);
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
@@ -142,17 +146,21 @@
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
usart_send[0]=0x55;
usart_send[1]=0xAA;
+ Modbus_RegMap();
while(1)
{
- IdleTask();
if(g_start_send_flag)
{
g_start_send_flag = 0;
Tag_App();
- }
-
+ }//else{
+ IdleTask();
+// }
+//
if(g_com_map[DEV_ROLE]==0)
Anchor_App();
+
+
}
}
--
Gitblit v1.9.3