From f34d8a58e94582091a28649d758591b705cae387 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期一, 03 五月 2021 16:05:33 +0800
Subject: [PATCH] V2.21 气压计异常处理
---
源码/核心板/Src/main.c | 173 ++++++++++++++++++++++++++++++++++++++++++++++++---------
1 files changed, 145 insertions(+), 28 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
index 872fdb4..151108f 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/main.c"
@@ -11,6 +11,7 @@
#include "global_param.h"
#include "ADC.h"
+//#define DEBUG_MODE
void Device_Init(void)
{
@@ -18,14 +19,16 @@
//SystemInit();
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
Nvic_Init();
- Systick_Init();
- Led_Init();
+// Systick_Init();
+ TIM3_Int_Init();
+
Beep_Init();
DW_GPIO_Init();
Uart1_Init();
+ Uart2_Init();
Spi_Init();
ADC_Configuration();
-
+ Led_Init();
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
}
u8 anchor_type;
@@ -42,31 +45,85 @@
checksum = Checksum_u16(&hbsend[2],12);
memcpy(&hbsend[14],&checksum,2);
}
+u16 tyncpoll_time;
+u16 slottime,max_slotpos;
+extern u8 module_power;
+extern u16 total_slotnum;
+void ComMapCheck(void)
+{
+ if(g_com_map[COM_INTERVAL]<10)
+ {
+ g_com_map[COM_INTERVAL]=500;
+ }
+ if(g_com_map[COM_INTERVAL]>1000)
+ {
+ g_com_map[COM_INTERVAL]=1000;
+ }
+ if(module_power>MAX_RFPOWER)
+ {module_power=MAX_RFPOWER;}
+ if(module_power<0)
+ {module_power=0;}
+ if(g_com_map[MAX_REPORT_ANC_NUM]>10)
+ {g_com_map[MAX_REPORT_ANC_NUM]=10;}
+ if(g_com_map[MAX_REPORT_ANC_NUM]<1)
+ {g_com_map[MAX_REPORT_ANC_NUM]=1;}
+ if(g_com_map[IMU_THRES]>10)
+ {g_com_map[IMU_THRES]=10;}
+ if(g_com_map[IMU_THRES]<1)
+ {g_com_map[IMU_THRES]=1;}
+}
void Program_Init(void)
-{uint16_t i;
+{ float temp;
+ u16 temp2;
+ uint16_t i;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
//deca_sleep(1000);
HeartBeatInit();
+#ifdef DEBUG_MODE
+// g_com_map[DEV_ROLE]=1;
+// g_com_map[DEV_ID]=1;
+// g_com_map[COM_INTERVAL]=100;
+// g_com_map[MAX_REPORT_ANC_NUM]=3;
+// g_com_map[NEARBASE_NUM]=1;
+// g_com_map[NEARBASE_ID1]=2;
+// g_com_map[ANC_FLAG]=1;
+// save_com_map_to_flash();
+ g_com_map[BASESYNCSEQ]=1;
+ g_com_map[SYNCBASEID]=1;
+#endif
+ OUT485_ENABLE;
+ ComMapCheck();
+ g_com_map[VERSION] = 0x0215;
dev_id = g_com_map[DEV_ID];
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
+ max_slotpos=g_com_map[COM_INTERVAL]/slottime;
+ tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
+ module_power = g_com_map[POWER];
+ total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ anchor_type = dev_id%3;
+
+
+
if(g_com_map[DEV_ROLE])
{
printf("标签ID: %d .\r\n",dev_id);
printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
}else{
- anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
+
printf("基站ID: %x .\r\n",dev_id);
printf("基站类型: %c .\r\n",anchor_type+0x41);
printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
}
+ OUT485_DISABLE;
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
for(i=0;i<255;i++)
{
- g_Tagdist[i]=0xffff;
+ g_Tagdist[i]=0x1ffff;
}
}
@@ -79,39 +136,72 @@
*
* @return none
*/
+extern float GetPressAndHeight(void);
+extern u16 synclost_count;
+extern float Height;
+int32_t intheight;
void HeatBeat(void)
-{
+{ u16 checksum;
+ GetPressAndHeight();
+ intheight = Height*100;//+g_com_map[MAX_REPORT_ANC_NUM];
+ if(synclost_count>5)
+ {
+ hbsend[6] = 0;
+ }else{
+ hbsend[6] = 1;
+ }
+ memcpy(&hbsend[7],&intheight,4);
+checksum = Checksum_u16(&hbsend[2],12);
+memcpy(&hbsend[14],&checksum,2);
UART_PushFrame(hbsend,16);
}
+extern u8 g_start_sync_flag,usart_send_flag,anc_report_num;
u16 heartbeat_timer,poll_timer;
+int16_t sync_timer;
+extern u8 flag_newsecond, tagpos_rec[50], tagpos_send[50],ancidlist_num;
+uint32_t tagpos_binary;
+extern u16 ancidlist_rec[20],ancidlist_send[20];
+extern u16 target_time;
void IdleTask(void)
{
- UART_CheckReceive();
- UART_CheckSend();
+
+ UART_CheckReceive();
+ UART_CheckSend();
+ UART2_CheckReceive();
+
if(heartbeat_timer>1000)
{
heartbeat_timer=0;
if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
HeatBeat();
}
- if(poll_timer>=g_com_map[COM_INTERVAL]-tag_delaytime)
- {
- poll_timer=0;
- if(g_com_map[ANC_POLL]||g_com_map[DEV_ROLE])
- {
- if(g_com_map[DEV_ROLE]==0)
- {int8_t correction_time;
- correction_time=tag_timer-g_com_map[DEV_ID]*3;
- tag_delaytime=correction_time;
- if(tag_delaytime>g_com_map[COM_INTERVAL]/2)
- {
- tag_delaytime=tag_delaytime-g_com_map[COM_INTERVAL];
- }
- }
- g_start_send_flag=1;
- }
-
+// if(flag_newsecond)
+// {
+// flag_newsecond=0;
+// tagpos_binary=0;
+// memcpy(ancidlist_send,ancidlist_rec,ancidlist_num*2);
+// ancidlist_num=0;
+// for(u8 i=0;i<max_slotpos;i++)
+// {
+// if(tagpos_rec[i])
+// tagpos_binary|=1<<i;
+// tagpos_rec[i] = 0;
+// }
+// }
+ if(target_time>1000)
+ {target_time-=1000;}
+ #ifdef USART_INTEGRATE_OUTPUT
+ if(g_com_map[DEV_ROLE]==0&&usart_send_flag)
+ {u16 checksum;
+ usart_send_flag=0;
+ usart_send_anc[2] = 5;//正常模式
+ usart_send_anc[3] = anc_report_num*6+2;//正常模式
+ checksum = Checksum_u16(&usart_send_anc[2],anc_report_num*6+2);
+ memcpy(&usart_send_anc[4+anc_report_num*6],&checksum,2);
+ UART_PushFrame(usart_send_anc,6+anc_report_num*6);
+ anc_report_num=0;
}
+ #endif
if(g_com_map[CNT_UPDATE]==1)
{
uint32_t result = 0;
@@ -122,10 +212,32 @@
result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
__enable_irq();
printf("进入升级模式\r\n");
+ g_com_map[CNT_UPDATE]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
// STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
// Delay_ms(100);
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+ if(g_com_map[CNT_REBOOT]==1)
+ {
+ g_com_map[CNT_REBOOT]=0;
+ g_com_map[MAP_SIGN_INDEX]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[CNT_RESTART]==1)
+ {
+ g_com_map[CNT_RESTART]=0;
+ save_com_map_to_flash();
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
}
int main(void)
@@ -134,23 +246,28 @@
Device_Init();
Program_Init();
Dw1000_Init();
+ BarInit();
delay_ms(10);
Dw1000_App_Init();
/* Loop forever initiating ranging exchanges. */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
usart_send[0]=0x55;
usart_send[1]=0xAA;
+ usart_send_anc[0]=0x55;
+ usart_send_anc[1]=0xAA;
+ //SendComMap(50, 0);
while(1)
{
- IdleTask();
+ g_start_sync_flag=0;
if(g_start_send_flag)
{
g_start_send_flag = 0;
Tag_App();
}
-
+ IdleTask();
if(g_com_map[DEV_ROLE]==0)
Anchor_App();
+
}
}
--
Gitblit v1.9.3