From 15c798731ba5658fc0ecd9e3f47f662861c56b9c Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期五, 23 二月 2024 14:40:37 +0800
Subject: [PATCH] 加入lora升级。
---
Src/main.c | 711 ++++++++++++++++++++++++++++------------------------------
1 files changed, 344 insertions(+), 367 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 497bc01..f7c08cc 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -17,7 +17,6 @@
******************************************************************************
*/
/* USER CODE END Header */
-
/* Includes ------------------------------------------------------------------*/
#include "main.h"
@@ -30,10 +29,17 @@
#include "TrackingDiff.h"
#include "dw_app.h"
#include "Flash.h"
+#include "user.h"
+#include "sx126x-board.h"
+#include "string.h"
+#include "stdio.h"
+#include "delay.h"
+#include "lora.h"
+#include "dw_mbx_anc.h"
#define NSH1 0x0001
#define GP 0x0002
#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
-//#define DEBUG_MODE
+#define DEBUG_MODE
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -53,13 +59,13 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
-ADC_HandleTypeDef hadc;
+ ADC_HandleTypeDef hadc;
+
+IWDG_HandleTypeDef hiwdg;
LPTIM_HandleTypeDef hlptim1;
SPI_HandleTypeDef hspi1;
-
-TIM_HandleTypeDef htim2;
UART_HandleTypeDef huart1;
DMA_HandleTypeDef hdma_usart1_rx;
@@ -72,18 +78,19 @@
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
-static void MX_LPTIM1_Init(void);
-static void MX_USART1_UART_Init(void);
-static void MX_SPI1_Init(void);
static void MX_ADC_Init(void);
static void MX_DMA_Init(void);
-static void MX_TIM2_Init(void);
+static void MX_LPTIM1_Init(void);
+static void MX_SPI1_Init(void);
+static void MX_USART1_UART_Init(void);
+static void MX_IWDG_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
+uint16_t Anchor_Vcc_time;
uint32_t dev_id;
uint16_t heartbeat_timer,poll_timer,sync_timer;
uint8_t aRxBuffer[1],group_id;
@@ -95,6 +102,10 @@
extern uint8_t module_power;
extern float nomove_count;
uint8_t imu_enable,motor_enable;
+void READC_Init(void)
+{
+MX_ADC_Init();
+}
u16 GetLPTime(void)
{
u16 count=HAL_LPTIM_ReadCounter(&hlptim1);
@@ -110,85 +121,45 @@
Error_Handler();
}
}
+static void MX_DMA_DeInit(void)
+{
+
+ /* DMA controller clock enable */
+ __HAL_RCC_DMA1_CLK_DISABLE();
+
+ /* DMA interrupt init */
+ /* DMA1_Channel2_3_IRQn interrupt configuration */
+ // HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 1, 0);
+ HAL_NVIC_DisableIRQ(DMA1_Channel2_3_IRQn);
+
+}
+void UsartDeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ waitusart_timer = 0;
+ MX_DMA_DeInit();
+ HAL_UART_DeInit(&huart1);
+ GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
uint16_t hardware_version,hardware_pici,hardware_type;
-uint8_t state5v;
+uint8_t state5v = 1;
float motor_keeptime;
void IdleTask(void)
-{u16 current_time;
-
- UART_CheckReceive();
- UART_CheckSend();
-
-if(huart1.Instance->ISR&USART_ISR_FE)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
-//if(!HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
-//{
-// LED_TR_ON;
-// LED_TB_OFF;
-//}else{
-// LED_TR_OFF;
- current_time=GetLPTime();
- //motor_state=2;
-// if(g_com_map[MOTOR_ONTIME]>0)
-// {
-// g_com_map[MOTOR_ONTIME]--;
-// motor_state = 1;
-// }
-if(0)//g_com_map[MOTOR_ENABLE])
{
-
-
- switch(motor_state)
- {case 0:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 1:
- if(current_time<MOTOR_ONTIME)
- {
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- }else{
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- }
- break;
- case 2:
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 3:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- }
-}
+//if(huart1.Instance->ISR&USART_ISR_FE)
+// {
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+// }
if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
+
+ UART_CheckReceive();
+ UART_CheckSend();
nomove_count = 0;
- bat_percent=Get_Battary();
+ // bat_percent=Get_Battary();
if(state5v==0)
{
state5v=1;
@@ -196,120 +167,102 @@
}
if(bat_percent>99)
{
- LED_LR_OFF;
+// LED_LR_OFF;
LED_LG_ON;
}else{
- LED_LR_ON;
+// LED_LR_ON;
LED_LG_OFF;
}
}else{
- state5v=0;
- LED_LR_OFF;
+ if(state5v==1)
+ {
+ state5v=0;
+ UsartDeInit();
+ }
+// LED_LR_OFF;
LED_LG_OFF;
// }
}
- if(g_com_map[CNT_UPDATE]==1)
- {
- uint32_t result = 0;
- uint16_t tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 128);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- g_com_map[CNT_UPDATE]=0;
- save_com_map_to_flash();
- delay_ms(100);
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_REBOOT]==1)
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
{
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_RESTART]==1)
- {
- g_com_map[CNT_RESTART]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
}
-
+void delay_us(uint32_t nTimer)
+{
+ uint32_t i=0;
+ for(i=0;i<nTimer;i++){
+ __NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
+ __NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
+ __NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
+ __NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
+ __NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
+ __NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();__NOP();
+ __NOP();__NOP();__NOP();__NOP();
+ }
+}
u16 total_slotnum,current_slotnum;
extern int32_t offsettimeus;
-
+u16 last_lpcount = 0;
void SetNextPollTime(u16 time)
{
- int32_t lpcount,lptime,target_time;
+ int32_t lpcount;
- if(current_slotnum>=total_slotnum)
- current_slotnum-=total_slotnum;
-
- target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
- //if(target_time<90000)
- {
- lptime=target_time-offsettimeus;
- lpcount = lptime/LPTIMER_LSB;
- if(lpcount>LPTIMER_1S_COUNT)
- lpcount-=LPTIMER_1S_COUNT;
- if(lpcount<0)
- {
- lpcount+=LPTIMER_1S_COUNT;
- }
+// if(current_slotnum>=total_slotnum)
+// current_slotnum-=total_slotnum;
+//
+// target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
+// //if(target_time<90000)
+// {
+// lptime=target_time-offsettimeus;
+// lpcount = lptime/LPTIMER_LSB;
+// if(lpcount>LPTIMER_1S_COUNT)
+// lpcount-=LPTIMER_1S_COUNT;
+// if(lpcount<0)
+// {
+// lpcount+=LPTIMER_1S_COUNT;
+// }
+ lpcount = last_lpcount+32768/tag_frequency-time*LPTIMER_LSB;
+ while(lpcount>LPTIMER_1S_COUNT)
+ {
+ lpcount-=LPTIMER_1S_COUNT;
+ }
+ last_lpcount = lpcount;
__HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
-}
+
}
-void HardWareTypeDiffConfig(void)
-{
-GPIO_InitTypeDef GPIO_InitStruct = {0};
-//hardware_type=2;
-if(hardware_type == 0)
- hardware_type = 1;
- switch(hardware_type)
- {
- case 1:
-
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
- GPIO_InitStruct.Pin = MOTOR_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- break;
- case 2:
- MX_TIM2_Init();
- //BarInit();
- break;
- }
-}
u8 active_flag,nomovesleeptime;
void Program_Init(void)
-{ float temp;
- uint16_t temp2;
- uint16_t i;
+{
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
hardware_version = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP);
hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = (1<<8)|30;
+ g_com_map[VERSION] = (1<<8)|0;
+ // testprogram();
+// g_com_map[DEV_ID]=0x6777;
+ #ifdef DEBUG_MODE
+ // g_com_map[GROUP_ID]=21;
+// g_com_map[DEV_ID]=0x6777;
+ // g_com_map[COM_INTERVAL]=100;
+ // g_com_map[MAX_REPORT_ANC_NUM]=1;
+ // g_com_map[NOMOVESLEEP_TIME]=10;
+ #endif
+ g_com_map[ACTIVE_INDEX] = 1;
+ g_com_map[GROUP_ID]=5;
+ g_com_map[UWBPOLLTIME_MS_IDX] = 100;
+ g_com_map[COM_INTERVAL] = 1000;
+ if(g_com_map[COM_INTERVAL]<1000)
+ {g_com_map[COM_INTERVAL] = 1000;}
active_flag = g_com_map[ACTIVE_INDEX];
- module_power = g_com_map[POWER];
+ g_com_map[POWER]=0;
+ module_power = g_com_map[POWER];
+ g_com_map[IMU_ENABLE] = 0;
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
@@ -325,24 +278,16 @@
nomovesleeptime = g_com_map[NOMOVESLEEP_TIME];
if(active_flag==0)
{
- imu_enable=1;
- nomovesleeptime =10;
+
}
-#ifdef DEBUG_MODE
-// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=1;
-// g_com_map[COM_INTERVAL]=100;
-// g_com_map[MAX_REPORT_ANC_NUM]=1;
-// g_com_map[NOMOVESLEEP_TIME]=10;
-#endif
+
+ // g_com_map[COM_INTERVAL]=100;
if(g_com_map[COM_INTERVAL]==0)
{
- g_com_map[COM_INTERVAL]=100;
+ g_com_map[COM_INTERVAL]=1000;
}
if(module_power>67)
{module_power=67;}
- if(module_power<0)
- {module_power=0;}
current_slotnum=1;
current_time=GetLPTime();
@@ -351,23 +296,11 @@
Error_Handler();
}
//g_com_map[NOMOVESLEEP_TIME]=5;
- printf("标签ID: %d .\r\n",dev_id);
- printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
- printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
-
-
+ printf("固件版本: LORA免布线基站 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
-}
-
-static void SystemPower_Config(void)
-{
- /* Enable Ultra low power mode */
- HAL_PWREx_EnableUltraLowPower();
-
- /* Enable the fast wake up from Ultra low power mode */
- HAL_PWREx_EnableFastWakeUp();
}
void mcu_sleep(void);
uint32_t temp;
@@ -384,6 +317,94 @@
{
//SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+uint16_t temp2;
+float dw_vbat,last_vbat;
+uint8_t Get_Battary_UWB(void)
+{
+ static uint8_t first = 1;
+ static float last_value = 100;
+
+ //if(bat_count++%600==0)
+ {
+ temp2=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp2&0xff)-173)/173+3.3;
+ if(fabs(dw_vbat-dw_vbat)>0.2)
+ {
+ last_vbat = dw_vbat;
+ return last_value;
+ }
+ last_vbat = dw_vbat;
+ if(dw_vbat>=3.0)
+ {
+ if(first)
+ {
+ first = 0;
+ last_value =(dw_vbat-3.0)*167;//(bat_volt-3.5)/0.6*100
+ }
+ last_value = 0.9*last_value + (dw_vbat-3.0)*16.7;
+ if(last_value>100)
+ last_value = 100;
+ if(last_value<0)
+ last_value = 0;
+ }
+ }
+ return last_value;
+}
+void MX_ADC_DeInit(void)
+{
+ HAL_ADC_DeInit(&hadc);
+ HAL_ADCEx_DisableVREFINT();
+}
+extern uint8_t TX_Buffer;
+void Uwb_Lora_Switch(uint8_t uwb, uint8_t lora)
+{
+if(uwb)
+HAL_GPIO_WritePin(SPI_CS_GPIO_Port, SPI_CS_Pin, GPIO_PIN_SET);
+else
+HAL_GPIO_WritePin(SPI_CS_GPIO_Port, SPI_CS_Pin, GPIO_PIN_RESET);
+
+if(lora)
+HAL_GPIO_WritePin(GPIOB, RADIO_NSS_Pin, GPIO_PIN_SET);
+else
+HAL_GPIO_WritePin(GPIOB, RADIO_NSS_Pin, GPIO_PIN_RESET);
+}
+uint8_t tx_num;
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ if(GPIO_Pin == GPIO_PIN_3)
+ {
+ RadioIrqProcess();
+ }
+}
+ u16 poll_startcount;
+u16 Anchor_Vcc_time1;
+uint8_t TX_Anchor_Vcc[100]={0x55,0xAA,0x14,20,0,0/*标签id*/,0,0/*基站ID*/,0/*保留*/,};
+extern float bat_volt;
+void Send_Anchor_Vcc_Poll()
+{
+ uint8_t vcc_send;
+ if(Anchor_Vcc_time>=3600)
+ {
+ Lora470_Init();
+ SX126xSetRfTxPower( 22 );//切换大发射功率
+ g_start_send_flag=0;
+ Anchor_Vcc_time=0;
+ memcpy(&TX_Anchor_Vcc[6],&g_com_map[DEV_ID],2);
+ memcpy(&TX_Anchor_Vcc[9],&g_com_map[VERSION],2);
+ vcc_send=(bat_volt-2.8)*100;
+ memcpy(&TX_Anchor_Vcc[11],&vcc_send,1);
+ memcpy(&TX_Anchor_Vcc[12],&g_com_map[POWER],1);
+ memcpy(&TX_Anchor_Vcc[13],&g_com_map[GROUP_ID],2);
+ memcpy(&TX_Anchor_Vcc[15],&g_com_map[DIST_OFFSET],2);
+// memcpy(&TX_Anchor_Vcc[18],&g_com_map[DIST_OFFSET],2);
+ Radio.Send( TX_Anchor_Vcc, 2+20);
+ SX126xSetRfTxPower( 22 );//切换回小发射功率；
+
+ Lora_Init();
+
+ }
+}
+u8 flag_entersleep = 1;
/* USER CODE END 0 */
/**
@@ -414,35 +435,44 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
- MX_LPTIM1_Init();
- MX_DMA_Init();
- MX_USART1_UART_Init();
- MX_SPI1_Init();
MX_ADC_Init();
-
-// MX_TIM2_Init();
+ MX_DMA_Init();
+ MX_LPTIM1_Init();
+ MX_SPI1_Init();
+ MX_USART1_UART_Init();
+// MX_IWDG_Init();
/* USER CODE BEGIN 2 */
- LED_LG_ON;
- Program_Init();
- LIS3DH_Data_Init();
- Dw1000_Init();
- Dw1000_App_Init();
- HardWareTypeDiffConfig();
- dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- dwt_entersleep();
- waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
- DW_DISABLE;
- if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
- {
- Error_Handler();
- }
-// HAL_Delay(2000);
-// mcu_sleep();
- //LED0_BLINK;
-// SystemPower_Config();
-//HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ LED_LG_ON;
+ Program_Init();
+ // LIS3DH_Data_Init();
+ // Uwb_Lora_Switch(1,0);
+ Dw1000_Init();
+ Dw1000_App_Init();
+ Delay_Ms(10);
+ // Uwb_Lora_Switch(0,0);
+ // HardWareTypeDiffConfig();
+ dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
+ dwt_entersleep();
+ DW_DISABLE;
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+ HAL_Delay(1500);
+ Lora_Init();
+ MbxInit();
+ // SwitchLoraSettingstest(UWB_CHANNEL_FRQ,UWB_CHANNEL_SF);
+ Delay_Ms(10);
+
/* USER CODE END 2 */
-
+//HAL_GPIO_WritePin(GPIOA, GPIO_PIN_4, GPIO_PIN_RESET);
+//HAL_GPIO_WritePin(GPIOB, GPIO_PIN_5, GPIO_PIN_SET);
+// Delay_Ms(10);
+// Delay_Ms(10);
+//HAL_GPIO_WritePin(GPIOA, GPIO_PIN_4, GPIO_PIN_SET);
+//HAL_GPIO_WritePin(GPIOB, GPIO_PIN_5, GPIO_PIN_RESET);
+// Delay_Ms(10);
+// Delay_Ms(10);
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
@@ -450,22 +480,15 @@
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
- if(g_start_send_flag&&active_flag)
- { static uint16_t blink_count=0;
+ // Send_Anchor_Vcc_Poll();
+ if(g_start_send_flag&&g_com_map[ACTIVE_INDEX])
+ {
SystemClock_Config();
g_start_send_flag = 0;
-
-// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
-// {
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
-// }else{
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
-// }
-// LED_TR_BLINK;s
-
- bat_percent=Get_Battary();
+// HAL_IWDG_Refresh(&hiwdg);
if(bat_percent>15)
- { LED_TB_ON;
+ {
+ LED_TB_ON;
Tag_App();
LED_TB_OFF;
}else{
@@ -473,25 +496,30 @@
Tag_App();
LED_TR_OFF;
}
+// test1();
+
//LED0_BLINK;
IdleTask();
if(waitusart_timer>0)
{
waitusart_timer--;
- }
- if(m_bEUARTTxEn==0&&waitusart_timer==0&&(motor_state==0||motor_state==3))
- {
-#ifndef DEBUG_MODE
-if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-#endif
- }
-
-
- }else{
+ }
+ }else{
IdleTask();
}
-
+ if(m_bEUARTTxEn==0&&waitusart_timer==0)
+ {
+ if(memcmp(g_com_map2,g_com_map,200)!=0)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
+ }
+// if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+// HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ #ifndef DEBUG_MODE
+ if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin)&&flag_entersleep)
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ #endif
+ }
// HAL_Delay(100);
// Get_Battary();
@@ -513,16 +541,21 @@
/** Configure the main internal regulator output voltage
*/
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
/** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
- /** Initializes the CPU, AHB and APB busses clocks
+
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
*/
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI
+ |RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
@@ -531,7 +564,8 @@
{
Error_Handler();
}
- /** Initializes the CPU, AHB and APB busses clocks
+
+ /** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@@ -571,13 +605,14 @@
/* USER CODE BEGIN ADC_Init 1 */
/* USER CODE END ADC_Init 1 */
+
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
*/
hadc.Instance = ADC1;
hadc.Init.OversamplingMode = DISABLE;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
- hadc.Init.SamplingTime = ADC_SAMPLETIME_160CYCLES_5;
+ hadc.Init.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.ContinuousConvMode = DISABLE;
@@ -594,17 +629,48 @@
{
Error_Handler();
}
+
/** Configure for the selected ADC regular channel to be converted.
*/
- sConfig.Channel = ADC_CHANNEL_1;
+ sConfig.Channel = ADC_CHANNEL_VREFINT;
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC_Init 2 */
-HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
+ HAL_ADCEx_EnableVREFINT();
+ HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
/* USER CODE END ADC_Init 2 */
+
+}
+
+/**
+ * @brief IWDG Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_IWDG_Init(void)
+{
+
+ /* USER CODE BEGIN IWDG_Init 0 */
+
+ /* USER CODE END IWDG_Init 0 */
+
+ /* USER CODE BEGIN IWDG_Init 1 */
+
+ /* USER CODE END IWDG_Init 1 */
+ hiwdg.Instance = IWDG;
+ hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
+ hiwdg.Init.Window = 4095;
+ hiwdg.Init.Reload = 4095;
+ if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN IWDG_Init 2 */
+
+ /* USER CODE END IWDG_Init 2 */
}
@@ -678,69 +744,6 @@
/* USER CODE BEGIN SPI1_Init 2 */
__HAL_SPI_ENABLE(&hspi1);
/* USER CODE END SPI1_Init 2 */
-
-}
-
-/**
- * @brief TIM2 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_TIM2_Init(void)
-{
-
- /* USER CODE BEGIN TIM2_Init 0 */
-
- /* USER CODE END TIM2_Init 0 */
-
- TIM_ClockConfigTypeDef sClockSourceConfig = {0};
- TIM_MasterConfigTypeDef sMasterConfig = {0};
- TIM_OC_InitTypeDef sConfigOC = {0};
-
- /* USER CODE BEGIN TIM2_Init 1 */
-
- /* USER CODE END TIM2_Init 1 */
- htim2.Instance = TIM2;
- htim2.Init.Prescaler = 9;
- htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
- htim2.Init.Period = 1171;
- htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
- htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
- if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
- {
- Error_Handler();
- }
- if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
- sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
- if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
- {
- Error_Handler();
- }
- sConfigOC.OCMode = TIM_OCMODE_PWM1;
- sConfigOC.Pulse = 599;
- sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
- if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN TIM2_Init 2 */
-//if(HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3) != HAL_OK)
-// {
-// /* Starting Error */
-// Error_Handler();
-// }
- /* USER CODE END TIM2_Init 2 */
- HAL_TIM_MspPostInit(&htim2);
}
@@ -829,7 +832,8 @@
HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_10|LED1_G_Pin|LED1_R_Pin|RADIO_nRESET_Pin
+ |RADIO_NSS_Pin|GPIO_PIN_7, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin, GPIO_PIN_RESET);
@@ -842,7 +846,7 @@
/*Configure GPIO pins : SCL_Pin SDA_Pin */
GPIO_InitStruct.Pin = SCL_Pin|SDA_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -854,31 +858,32 @@
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(SPI_CS_GPIO_Port, &GPIO_InitStruct);
- /*Configure GPIO pin : BAT_MEAS_GND_Pin */
- GPIO_InitStruct.Pin = BAT_MEAS_GND_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
+ /*Configure GPIO pins : BAT_MEAS_GND_Pin PB10 LED1_G_Pin LED1_R_Pin
+ RADIO_nRESET_Pin RADIO_NSS_Pin PB7 PWR_CTL_Pin */
+ GPIO_InitStruct.Pin = BAT_MEAS_GND_Pin|GPIO_PIN_10|LED1_G_Pin|LED1_R_Pin
+ |RADIO_nRESET_Pin|RADIO_NSS_Pin|GPIO_PIN_7|PWR_CTL_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(BAT_MEAS_GND_GPIO_Port, &GPIO_InitStruct);
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pin : USER_KEY_Pin */
GPIO_InitStruct.Pin = USER_KEY_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
+ GPIO_InitStruct.Mode = GPIO_MODE_EVT_FALLING;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(USER_KEY_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : RADIO_BUSY_Pin */
+ GPIO_InitStruct.Pin = RADIO_BUSY_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_BUSY_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pin : INPUT_5V_Pin */
GPIO_InitStruct.Pin = INPUT_5V_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
-
- /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin LED2_R_Pin PWR_CTL_Pin */
- GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|PWR_CTL_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pins : DW_WKUP_Pin DW_CTRL_Pin LED2_G_Pin */
GPIO_InitStruct.Pin = DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin;
@@ -887,15 +892,18 @@
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- /*Configure GPIO pin : PWR_ON_Pin */
- GPIO_InitStruct.Pin = PWR_ON_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = GPIO_PULLUP;
- HAL_GPIO_Init(PWR_ON_GPIO_Port, &GPIO_InitStruct);
+ /*Configure GPIO pin : RADIO_DIO1_Pin */
+ GPIO_InitStruct.Pin = RADIO_DIO1_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_DIO1_GPIO_Port, &GPIO_InitStruct);
/* EXTI interrupt init*/
HAL_NVIC_SetPriority(EXTI0_1_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);
+
+ HAL_NVIC_SetPriority(EXTI2_3_IRQn, 1, 0);
+ HAL_NVIC_EnableIRQ(EXTI2_3_IRQn);
}
@@ -926,46 +934,17 @@
}
extern uint8_t tx_near_msg[80],stationary_flag;
float key_keeptime;
+extern float freqlost_count,range_lost_time;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
static uint8_t i=0;
i++;
- g_start_send_flag=1;
+
+ Anchor_Vcc_time++;
current_slotnum++;
- SetNextPollTime(tyncpoll_time);
- nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
- if(motor_keeptime>0)
- {
- motor_keeptime-=(float)g_com_map[COM_INTERVAL]/1000;
- }
- if(!GET_USERKEY)
- {
- key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
- if(key_keeptime>=KEY_KEEPRESET_TIME)
- {
- g_com_map[ACTIVE_INDEX]=!active_flag;
- save_com_map_to_flash();
- MOTOR_ON;
- HAL_Delay(2000);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
- }
- }else{
- key_keeptime=0;
- }
- if(nomove_count>STATIONARY_TIME)
- {
- stationary_flag = 1;
- }else{
- stationary_flag = 0;
- }
-if(nomove_count>=nomovesleeptime-1&&imu_enable)
- {
- tx_near_msg[TAGSTATE] = tx_near_msg[TAGSTATE]|GOINGSLEEPBIT;
- }
- if(nomove_count>nomovesleeptime&&imu_enable)
- {
- mcu_sleep();
- }
+ freqlost_count+=1/(float)tag_frequency;
+ range_lost_time +=1/(float)tag_frequency;
+ g_start_send_flag=1;
}
/* USER CODE END 4 */
@@ -997,5 +976,3 @@
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.3