From 1906f7b280eeb7a8f5dbfda96c9485fba4a74de2 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期三, 21 二月 2024 15:14:37 +0800
Subject: [PATCH] 移植最新逻辑，能同步，能测距，能读取，能写。
---
Src/main.c | 990 ++++++++++++++++++++++++++++++++++++++++++++--------------
1 files changed, 750 insertions(+), 240 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 8772dc7..6e71ed6 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -28,6 +28,21 @@
#include "deca_device_api.h"
#include "global_param.h"
#include "TrackingDiff.h"
+#include "dw_app.h"
+#include "Flash.h"
+#include "user.h"
+#include "sx126x-board.h"
+#include "string.h"
+#include "stdio.h"
+#include "delay.h"
+#include <stdlib.h>
+#include <Lora.h>
+#include "radio.h"
+#define NSH1 0x0001
+#define GP 0x0002
+#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
+#define DEBUG_MODE
+UART_WakeUpTypeDef Selection;
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -38,8 +53,7 @@
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
//#define DEBUG_MODE
-#define Period (uint32_t) 32768
-#define Timeout (uint32_t) 32768 - 1//(32768 - 1)
+
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
@@ -50,13 +64,18 @@
/* Private variables ---------------------------------------------------------*/
ADC_HandleTypeDef hadc;
+IWDG_HandleTypeDef hiwdg;
+
LPTIM_HandleTypeDef hlptim1;
-SPI_HandleTypeDef hspi1;
-
+UART_HandleTypeDef hlpuart1;
UART_HandleTypeDef huart1;
DMA_HandleTypeDef hdma_usart1_rx;
DMA_HandleTypeDef hdma_usart1_tx;
+
+SPI_HandleTypeDef hspi1;
+
+TIM_HandleTypeDef htim2;
/* USER CODE BEGIN PV */
@@ -65,11 +84,14 @@
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
-static void MX_LPTIM1_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_SPI1_Init(void);
static void MX_ADC_Init(void);
static void MX_DMA_Init(void);
+static void MX_IWDG_Init(void);
+static void MX_TIM2_Init(void);
+static void MX_LPUART1_UART_Init(void);
+static void MX_LPTIM1_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@@ -77,112 +99,255 @@
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
uint32_t dev_id;
-extern uint8_t g_start_sync_flag;
uint16_t heartbeat_timer,poll_timer,sync_timer;
uint8_t aRxBuffer[1],group_id;
-
-void IdleTask(void)
-{
- g_start_sync_flag=0;
- UART_CheckReceive();
- UART_CheckSend();
-
- if(huart1.Instance->ISR&USART_ISR_ORE)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
-if(!HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
-{
- LED_TR_ON;
- LED_TB_OFF;
-}else{
- LED_TR_OFF;
- if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- {
- LED_TB_ON;
- }
-}
- if(g_com_map[CNT_UPDATE]==1)
- {
- uint32_t result = 0;
- uint16_t tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 128);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- g_com_map[CNT_UPDATE]=0;
- save_com_map_to_flash();
- delay_ms(100);
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_REBOOT]==1)
- {
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_RESTART]==1)
- {
- g_com_map[CNT_RESTART]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
-
- }
-
+uint8_t bat_percent=0,g_start_send_flag;
+extern u8 motor_state;
uint16_t tyncpoll_time,lpsettime;
uint16_t slottime,max_slotpos;
-uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency;
+uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time;
extern uint8_t module_power;
+extern float nomove_count;
uint8_t imu_enable,motor_enable;
+uint32_t lp_time;
+extern uint32_t lora_txtime_old;
+uint8_t anjian_flag;
+uint8_t stationary_flag;
+uint16_t stationary_num;
+u16 GetLPTime(void)
+{
+ u16 count=HAL_LPTIM_ReadCounter(&hlptim1);
+ return count*LPTIMER_LSB/1000;
+}
+void UsartInit(void)
+{
+ waitusart_timer = tag_frequency*USART_KEEPWAKE_TIME;
+ MX_DMA_Init();
+ MX_USART1_UART_Init();
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+}
+static void MX_DMA_DeInit(void)
+{
+
+ /* DMA controller clock enable */
+ __HAL_RCC_DMA1_CLK_DISABLE();
+
+ /* DMA interrupt init */
+ /* DMA1_Channel2_3_IRQn interrupt configuration */
+ // HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 1, 0);
+ HAL_NVIC_DisableIRQ(DMA1_Channel2_3_IRQn);
+
+}
+void UsartDeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ waitusart_timer = 0;
+ MX_DMA_DeInit();
+ HAL_UART_DeInit(&huart1);
+ GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
+uint16_t hardware_version,hardware_pici,hardware_type;
+uint8_t state5v = 1;
+extern uint8_t du_flag;
+extern uint8_t xie_flag;
+float motor_keeptime;
+void IdleTask(void)
+{
+//if(huart1.Instance->ISR&USART_ISR_FE)
+// {
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+//// }
+// if(du_flag==1)
+// {
+// du_flag=0;
+//
+// }
+// if(xie_flag==1)
+// {
+// xie_flag=0;
+// memcpy((uint8_t*)&g_com_map + pack_index, mUsartReceivePack, pack_datalen);
+// }
+ if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ {
+
+ UART_CheckReceive();
+ UART_CheckSend();
+ nomove_count = 0;
+ // bat_percent=Get_Battary();
+ if(state5v==0)
+ {
+ state5v=1;
+ UsartInit();
+ }
+ if(bat_percent>99)
+ {
+ LED2_TR_OFF;
+ LED2_TB_ON;
+ }else{
+ LED2_TR_ON;
+ LED2_TB_OFF;
+ }
+ }else{
+ if(state5v==1)
+ {
+ state5v=0;
+ UsartDeInit();
+ }
+ LED2_TR_OFF;
+ LED2_TB_OFF;
+// }
+}
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+
+ }
+
+
+u16 total_slotnum,current_slotnum;
+extern int32_t offsettimeus;
+//u16 last_lpcount = 0;
+void SetNextPollTime(u16 time)
+{
+ int32_t lpcount1,lptime1,target_time1;
+int32_t last_lpcount1;
+// if(current_slotnum>=total_slotnum)
+// current_slotnum-=total_slotnum;
+//
+// target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
+// //if(target_time<90000)
+// {
+// lptime=target_time-offsettimeus;
+// lpcount = lptime/LPTIMER_LSB;
+// if(lpcount>LPTIMER_1S_COUNT)
+// lpcount-=LPTIMER_1S_COUNT;
+// if(lpcount<0)
+// {
+// lpcount+=LPTIMER_1S_COUNT;
+// }
+ last_lpcount1=HAL_LPTIM_ReadCounter(&hlptim1);
+ lpcount1 = last_lpcount1+32.768*time;
+ while(lpcount1>LPTIMER_1S_COUNT)
+ {
+ lpcount1-=LPTIMER_1S_COUNT;
+ }
+// last_lpcount = lpcount;
+ __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount1+32768);
+
+}
+
+/* 返回ch字符在sign数组中的序号 */
+int getIndexOfSigns(char ch)
+{
+ if(ch >= '0' && ch <= '9')
+ {
+ return ch - '0';
+ }
+ if(ch >= 'A' && ch <='F')
+ {
+ return ch - 'A' + 10;
+ }
+ if(ch >= 'a' && ch <= 'f')
+ {
+ return ch - 'a' + 10;
+ }
+ return -1;
+}
+/* 十六进制数转换为十进制数 */
+long hexToDec(char *source)
+{
+ long sum = 0;
+ long t = 1;
+ int i, len;
+
+ len = strlen(source);
+ for(i=len-1; i>=0; i--)
+ {
+ sum += t * getIndexOfSigns(*(source + i));
+ t *= 16;
+ }
+
+ return sum;
+}
+
+//u32 Loratx_frequency;
+u8 active_flag,nomovesleeptime;
+//void GetLoratx_frequency(void)
+//{
+//Loratx_frequency=470000000;
+//srand(HAL_LPTIM_ReadCounter(&hlptim1));
+// Loratx_frequency=((rand()%5)+470)*1000000;
+// if(470000000<=Loratx_frequency&&Loratx_frequency<480000000)
+// g_com_map[NEARBASE_ID1]=1136+(Loratx_frequency/1000000-470);
+// if(480000000<=Loratx_frequency&&Loratx_frequency<490000000)
+// g_com_map[NEARBASE_ID1]=1152+(Loratx_frequency/1000000-480);
+//Loratx_frequency=470000000;
+//}
void Program_Init(void)
{ float temp;
uint16_t temp2;
uint16_t i;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
+ hardware_version = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP);
+ hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
+ hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x0109;
-#ifdef DEBUG_MODE
-// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=1;
- g_com_map[COM_INTERVAL]=100;
-// g_com_map[MAX_REPORT_ANC_NUM]=1;
- g_com_map[NOMOVESLEEP_TIME]=10;
-#endif
-
-
- module_power = g_com_map[POWER];
+ g_com_map[VERSION] = (1<<8)|0;
+// g_com_map[DEV_ID]=1158;
+ g_com_map[GROUP_ID]=5;
+// g_com_map[COM_INTERVAL] = 1000;
+ if(g_com_map[COM_INTERVAL]<1000)
+ {g_com_map[COM_INTERVAL] = 1000;}
+ active_flag = g_com_map[ACTIVE_INDEX];
+ module_power = g_com_map[POWER];
+ g_com_map[IMU_ENABLE] = 0;
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
-
+
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
- slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*4/3);
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
-
- slot_startcount=(float)(tyncpoll_time+10)*1000/LPTIMER_LSB;
- lastpoll_count=slot_startcount;
- interval_count=(float)g_com_map[COM_INTERVAL]*1000/LPTIMER_LSB;
- tag_frequency = 1000/g_com_map[COM_INTERVAL];
- if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
- {
- Error_Handler();
- }
+ slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
+ lastpoll_time=tyncpoll_time;
+ tag_frequency = 1000/g_com_map[COM_INTERVAL];
+ total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ nomovesleeptime = g_com_map[NOMOVESLEEP_TIME];
+ if(active_flag==0)
+ {
+ imu_enable=1;
+ nomovesleeptime =10;
+ }
- printf("标签ID: %d .\r\n",dev_id);
- printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
- printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
-
+ // g_com_map[COM_INTERVAL]=100;
+ if(g_com_map[COM_INTERVAL]==0)
+ {
+ g_com_map[COM_INTERVAL]=1000;
+ }
+ if(module_power>67)
+ {module_power=67;}
+ if(module_power<0)
+ {module_power=0;}
+ current_slotnum=1;
+// current_time=GetLPTime();
+// if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, 0) != HAL_OK) //system time is 1010ms 1 puls=30.518us
+// {
+// Error_Handler();
+// }
+
+//g_com_map[NOMOVESLEEP_TIME]=5;
+// printf("固件版本: 免布线LORA工卡 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -200,7 +365,6 @@
uint32_t temp;
extern uint8_t sleep_flag,m_bEUARTTxEn;
uint16_t waitusart_timer;
-uint8_t bat_percent=0;
//void HAL_UART_RxCpltCallback(UART_HandleTypeDef *UartHandle)
//{
// /* Set transmission flag: trasfer complete*/
@@ -211,6 +375,191 @@
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
//SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+}
+uint16_t temp2;
+float dw_vbat,last_vbat;
+uint8_t Get_Battary_UWB(void)
+{
+ static uint8_t first = 1;
+ static float last_value = 100;
+ static uint16_t bat_count = 0;
+ //if(bat_count++%600==0)
+ {
+ temp2=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp2&0xff)-173)/173+3.3;
+ if(fabs(dw_vbat-dw_vbat)>0.2)
+ {
+ last_vbat = dw_vbat;
+ return last_value;
+ }
+ last_vbat = dw_vbat;
+ if(dw_vbat>=3.0)
+ {
+ if(first)
+ {
+ first = 0;
+ last_value =(dw_vbat-3.0)*167;//(bat_volt-3.5)/0.6*100
+ }
+ last_value = 0.9*last_value + (dw_vbat-3.0)*16.7;
+ if(last_value>100)
+ last_value = 100;
+ if(last_value<0)
+ last_value = 0;
+ }
+ }
+ return last_value;
+}
+void MX_ADC_DeInit(void)
+{
+ HAL_ADC_DeInit(&hadc);
+ HAL_ADCEx_DisableVREFINT();
+}
+uint16_t irq_num;
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ if(GPIO_Pin == GPIO_PIN_3)
+ {
+ SystemClock_Config();
+// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_SET);
+// HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_RESET); //片选lora有效
+// l_bIsVibration = HIDO_TRUE;
+// nomove_time=0;
+// printf("RXD :77777\r\n");
+ irq_num++;
+ RadioIrqProcess();
+ }
+ if(GPIO_Pin == GPIO_PIN_1)//按键
+ {
+ SystemClock_Config();
+ anjian_flag=1;
+ }
+ if(GPIO_Pin == GPIO_PIN_0)//加速度
+ {
+ SystemClock_Config();
+ stationary_flag =0;
+ stationary_num=0;
+ }
+}
+extern void Lora_tx_zubao( void );
+extern void Lora_tx_mode( void );
+extern uint8_t Lora_tx_ancnum;
+extern u8 lora_seq_nb2;
+extern uint16_t lora_yingda_num;
+uint8_t lora_tx_flag;
+uint8_t lora_txanchor_power_flag;
+extern uint16_t Lora_tx_ancid[50];
+extern uint16_t Lora_tx_ancdist[50];
+extern uint8_t Lora_tx_anc_electricity[50];
+u8 lora_seq_nb1;
+static uint8_t send_frame1[EUART_RX_BUF_SIZE];
+#define BleRxBufferSize 1
+uint8_t aRxBuffer[1],group_id,GPSRxBuffer[BleRxBufferSize];
+uint8_t ble_rx_success_flag;
+uint8_t fangzhijinrushuimian_flag;
+uint8_t GPS_zhongzhuandate[200];
+uint8_t GPS_zhongzhuannum;
+uint8_t GPS_GGAdate[200]={1,2,3,4,5,6,7,8,9};
+uint8_t GPSchangdu;
+uint8_t Close_RMC[20]="$CCMSG,RMC,1,0,*04\r\n";
+uint8_t Close_GSA[20]="$CCMSG,GSA,1,0,*0D\r\n";
+uint8_t Close_GSV[20]="$CCMSG,GSV,1,0,*1A\r\n";
+uint8_t Close_GLL[20]="$CCMSG,GLL,1,0,*1F\r\n";
+uint8_t Close_TXT[20]="$CCMSG,TXT,1,0,*00\r\n";
+uint8_t gps_ceju=0;
+uint8_t no_yingdaflag;
+void MX_ADC1_Init()
+{
+MX_ADC_Init();
+}
+extern uint16_t Lora_rece_error;
+extern uint16_t Beepchixutime;
+void Beep_Off()
+{
+ __HAL_TIM_SET_COMPARE(&htim2, TIM_CHANNEL_4, 0);
+ HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_4);
+ HAL_TIM_Base_Stop_IT(&htim2);
+}
+void Beep_On()
+{
+ HAL_TIM_Base_Start_IT(&htim2);
+ HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_4);
+ __HAL_TIM_SET_COMPARE(&htim2, TIM_CHANNEL_4, 60);
+}
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+//HAL_UART_Transmit(&huart1,&ble_zhongzhuannum,1,1000);
+ {
+ GPS_zhongzhuandate[GPS_zhongzhuannum]=GPSRxBuffer[0];
+ GPS_zhongzhuannum++;
+ if(GPS_zhongzhuandate[GPS_zhongzhuannum-1]==0x0A&&GPS_zhongzhuandate[GPS_zhongzhuannum-2]==0x0D)
+ {
+// HAL_UART_Transmit(&hlpuart1,ble_rxdate,5,1000);
+ memcpy(GPS_GGAdate,GPS_zhongzhuandate,GPS_zhongzhuannum);
+ GPSchangdu= GPS_zhongzhuannum;
+ memset(GPS_zhongzhuandate,0,sizeof(GPS_zhongzhuandate));
+ GPS_zhongzhuannum=0;
+ fangzhijinrushuimian_flag=0;
+ ble_rx_success_flag=1;
+ if(GPSchangdu>40)
+ {
+ if(state5v==0)
+ LED2_TB_ON;
+ }
+ else
+ {
+ if(state5v==0)
+ LED2_TR_ON;
+ }
+ }
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)GPSRxBuffer, 1);
+ }
+}
+uint8_t ble_rxdate111[3]={0x11,0x22,0x33};
+void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart)
+{
+ SystemClock_Config();
+// HAL_UART_Transmit(&hlpuart1,(uint8_t*)ble_rxdate111,3,1000);
+//// huart->RxState = HAL_UART_STATE_BUSY_RX;
+// ble_rxzhongzhuandate[ble_zhongzhuannum]=BleRxBuffer[0];
+// ble_zhongzhuannum++;
+// if(ble_rxzhongzhuandate[ble_zhongzhuannum-1]==0x0A&&ble_rxzhongzhuandate[ble_zhongzhuannum-2]==0x0D)
+// {
+// ble_zhongzhuannum=0;
+// memcpy(ble_rxdate,ble_rxzhongzhuandate,50);
+// memset(ble_rxzhongzhuandate,0,sizeof(ble_rxzhongzhuandate));
+// }
+// if(lp_time>3)
+ fangzhijinrushuimian_flag=1;
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)GPSRxBuffer, 1);
+// HAL_UART_Transmit(&hlpuart1,ble_rxdate,2,1000);
+}
+void PowerDownDetect(void)
+{
+ static uint32_t l_u32QXpowerTick = 0;
+static uint32_t powercount=0;
+ if(HAL_GPIO_ReadPin(GPIOB,GPIO_PIN_12))
+ {
+ delay_ms(1000);
+ if(HAL_GPIO_ReadPin(GPIOB,GPIO_PIN_12))
+ {
+ while(1)
+ {
+ if(HAL_GPIO_ReadPin(GPIOB,GPIO_PIN_12)==0)
+ {
+ delay_ms(100);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_RESET);
+ }
+ }
+ }
+ }
+}
+uint8_t usart5_state,flag_onesecond;
+void OneSecondTask(void)
+{
+ if(flag_onesecond==1)
+ {
+ flag_onesecond = 0;
+ }
}
/* USER CODE END 0 */
@@ -223,7 +572,6 @@
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
-
/* MCU Configuration--------------------------------------------------------*/
@@ -231,7 +579,7 @@
HAL_Init();
/* USER CODE BEGIN Init */
-
+//每次生成CUBE后需要注意，串口初始化要在DMA初始化后面，手动调整顺序**************
/* USER CODE END Init */
/* Configure the system clock */
@@ -243,26 +591,48 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
- MX_LPTIM1_Init();
MX_USART1_UART_Init();
MX_SPI1_Init();
MX_ADC_Init();
MX_DMA_Init();
+// MX_IWDG_Init();
+ MX_TIM2_Init();
+ MX_LPUART1_UART_Init();
+ MX_LPTIM1_Init();
/* USER CODE BEGIN 2 */
- Program_Init();
- LIS3DH_Data_Init();
- Dw1000_Init();
- Dw1000_App_Init();
-
- dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- dwt_entersleep();
- waitusart_timer=1;
- DW_DISABLE;
-// HAL_Delay(2000);
-// mcu_sleep();
- //LED0_BLINK;
-// SystemPower_Config();
-//HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+// LED_LG_ON;
+ Program_Init();
+ LIS3DH_Data_Init();
+// Uwb_Lora_Switch(1,0);
+ Dw1000_Init();
+ Delay_Ms(10);
+// Uwb_Lora_Switch(0,0);
+ // HardWareTypeDiffConfig();
+ dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
+ dwt_entersleep();
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+ Delay_Ms(10);
+// Uwb_Lora_Switch(0,0);
+// printf("RXD :66666\r\n");
+ usart_send[0]=0x55;
+ usart_send[1]=0xaa;
+ bat_percent=Get_VDDVlotage();
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)GPSRxBuffer, 1);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_SET); //开GPS电源
+ LoraInit();
+ Delay_Ms(1000);
+ HAL_UART_Transmit(&hlpuart1,Close_RMC,22,1000);
+ HAL_UART_Transmit(&hlpuart1,Close_GSA,22,1000);
+ HAL_UART_Transmit(&hlpuart1,Close_GSV,22,1000);
+ HAL_UART_Transmit(&hlpuart1,Close_GLL,22,1000);
+ HAL_UART_Transmit(&hlpuart1,Close_TXT,22,1000);
+ if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, 0) != HAL_OK) //system time is 1010ms 1 puls=30.518us
+ {
+ Error_Handler();
+ }
/* USER CODE END 2 */
/* Infinite loop */
@@ -272,47 +642,25 @@
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
- if(g_start_send_flag)
- { static uint16_t blink_count=0;
- SystemClock_Config();
- g_start_send_flag = 0;
-// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
-// {
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
-// }else{
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
-// }
-
- bat_percent=Get_Battary();
- if(bat_percent>15)
- { LED0_ON;
- Tag_App();
- LED0_OFF;
- }else{
- LED_LR_ON;
- Tag_App();
- LED_LR_OFF;
- }
- //LED0_BLINK;
- IdleTask();
- if(waitusart_timer>0)
- {
- waitusart_timer--;
- }
- if(m_bEUARTTxEn==0&&waitusart_timer==0)
- {
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
- }
-
-
- }else{
- IdleTask();
- }
+// HAL_IWDG_Refresh(&hiwdg);
+ OneSecondTask();
+ IdleTask();
-// HAL_Delay(100);
- // Get_Battary();
-
- // LIS3DH_Data_Init();
+ #ifndef DEBUG_MODE
+ if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ {
+ if(fangzhijinrushuimian_flag==0)
+ {
+ Selection.WakeUpEvent = UART_WAKEUP_ON_STARTBIT;
+ HAL_UARTEx_EnableClockStopMode(&hlpuart1);
+ HAL_UARTEx_EnableStopMode( &hlpuart1 );
+ HAL_UARTEx_StopModeWakeUpSourceConfig( &hlpuart1, Selection );
+ __HAL_UART_ENABLE_IT(&hlpuart1, UART_IT_WUF);
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ }
+ }
+ #endif
+
}
/* USER CODE END 3 */
}
@@ -327,19 +675,21 @@
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
- /** Configure the main internal regulator output voltage
+ /** Configure the main internal regulator output voltage
*/
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
- /** Configure LSE Drive Capability
+ /** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
- /** Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI
+ |RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
@@ -348,7 +698,7 @@
{
Error_Handler();
}
- /** Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@@ -361,8 +711,10 @@
{
Error_Handler();
}
- PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_LPTIM1;
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_LPUART1
+ |RCC_PERIPHCLK_LPTIM1;
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
+ PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_LSE;
PeriphClkInit.LptimClockSelection = RCC_LPTIM1CLKSOURCE_LSE;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -388,13 +740,13 @@
/* USER CODE BEGIN ADC_Init 1 */
/* USER CODE END ADC_Init 1 */
- /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
+ /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
*/
hadc.Instance = ADC1;
hadc.Init.OversamplingMode = DISABLE;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
- hadc.Init.SamplingTime = ADC_SAMPLETIME_160CYCLES_5;
+ hadc.Init.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.ContinuousConvMode = DISABLE;
@@ -411,17 +763,47 @@
{
Error_Handler();
}
- /** Configure for the selected ADC regular channel to be converted.
+ /** Configure for the selected ADC regular channel to be converted.
*/
- sConfig.Channel = ADC_CHANNEL_1;
+ sConfig.Channel = ADC_CHANNEL_VREFINT;
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC_Init 2 */
-HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
+ HAL_ADCEx_EnableVREFINT();
+ HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
/* USER CODE END ADC_Init 2 */
+
+}
+
+/**
+ * @brief IWDG Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_IWDG_Init(void)
+{
+
+ /* USER CODE BEGIN IWDG_Init 0 */
+
+ /* USER CODE END IWDG_Init 0 */
+
+ /* USER CODE BEGIN IWDG_Init 1 */
+
+ /* USER CODE END IWDG_Init 1 */
+ hiwdg.Instance = IWDG;
+ hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
+ hiwdg.Init.Window = 4095;
+ hiwdg.Init.Reload = 4095;
+ if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN IWDG_Init 2 */
+
+ /* USER CODE END IWDG_Init 2 */
}
@@ -452,11 +834,89 @@
Error_Handler();
}
/* USER CODE BEGIN LPTIM1_Init 2 */
- if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, Period, Timeout) != HAL_OK)
+
+ /* USER CODE END LPTIM1_Init 2 */
+
+}
+
+/**
+ * @brief LPUART1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_LPUART1_UART_Init(void)
+{
+
+ /* USER CODE BEGIN LPUART1_Init 0 */
+
+ /* USER CODE END LPUART1_Init 0 */
+
+ /* USER CODE BEGIN LPUART1_Init 1 */
+
+ /* USER CODE END LPUART1_Init 1 */
+ hlpuart1.Instance = LPUART1;
+ hlpuart1.Init.BaudRate = 9600;
+ hlpuart1.Init.WordLength = UART_WORDLENGTH_8B;
+ hlpuart1.Init.StopBits = UART_STOPBITS_1;
+ hlpuart1.Init.Parity = UART_PARITY_NONE;
+ hlpuart1.Init.Mode = UART_MODE_TX_RX;
+ hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ if (HAL_UART_Init(&hlpuart1) != HAL_OK)
{
Error_Handler();
}
- /* USER CODE END LPTIM1_Init 2 */
+ /* USER CODE BEGIN LPUART1_Init 2 */
+
+ /* USER CODE END LPUART1_Init 2 */
+
+}
+
+/**
+ * @brief USART1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_USART1_UART_Init(void)
+{
+
+ /* USER CODE BEGIN USART1_Init 0 */
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ /* USER CODE END USART1_Init 0 */
+
+ /* USER CODE BEGIN USART1_Init 1 */
+
+ /* USER CODE END USART1_Init 1 */
+ huart1.Instance = USART1;
+ huart1.Init.BaudRate = 115200;
+ huart1.Init.WordLength = UART_WORDLENGTH_8B;
+ huart1.Init.StopBits = UART_STOPBITS_1;
+ huart1.Init.Parity = UART_PARITY_NONE;
+ huart1.Init.Mode = UART_MODE_TX_RX;
+ huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+ huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT|UART_ADVFEATURE_DMADISABLEONERROR_INIT;
+ huart1.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
+ huart1.AdvancedInit.DMADisableonRxError = UART_ADVFEATURE_DMA_DISABLEONRXERROR;
+ if (HAL_UART_Init(&huart1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN USART1_Init 2 */
+ GPIO_InitStruct.Pin = GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF4_USART1;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+// if(HAL_UART_Receive_IT(&huart1, (uint8_t *)aRxBuffer, 1) != HAL_OK)
+// {
+// Error_Handler();
+// }
+ Usart1InitVariables();
+ /* USER CODE END USART1_Init 2 */
}
@@ -499,53 +959,58 @@
}
/**
- * @brief USART1 Initialization Function
+ * @brief TIM2 Initialization Function
* @param None
* @retval None
*/
-static void MX_USART1_UART_Init(void)
+static void MX_TIM2_Init(void)
{
- /* USER CODE BEGIN USART1_Init 0 */
+ /* USER CODE BEGIN TIM2_Init 0 */
- /* USER CODE END USART1_Init 0 */
+ /* USER CODE END TIM2_Init 0 */
- /* USER CODE BEGIN USART1_Init 1 */
+ TIM_MasterConfigTypeDef sMasterConfig = {0};
+ TIM_OC_InitTypeDef sConfigOC = {0};
- /* USER CODE END USART1_Init 1 */
- huart1.Instance = USART1;
- huart1.Init.BaudRate = 115200;
- huart1.Init.WordLength = UART_WORDLENGTH_8B;
- huart1.Init.StopBits = UART_STOPBITS_1;
- huart1.Init.Parity = UART_PARITY_NONE;
- huart1.Init.Mode = UART_MODE_TX_RX;
- huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
- huart1.Init.OverSampling = UART_OVERSAMPLING_16;
- huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
- huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
- if (HAL_UART_Init(&huart1) != HAL_OK)
+ /* USER CODE BEGIN TIM2_Init 1 */
+
+ /* USER CODE END TIM2_Init 1 */
+ htim2.Instance = TIM2;
+ htim2.Init.Prescaler = 32-1;
+ htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim2.Init.Period = 250-1;
+ htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
{
Error_Handler();
}
- /* USER CODE BEGIN USART1_Init 2 */
-
-// if(HAL_UART_Receive_IT(&huart1, (uint8_t *)aRxBuffer, 1) != HAL_OK)
-// {
-// Error_Handler();
-// }
- if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
- {
- Error_Handler();
- }
- Usart1InitVariables();
- /* USER CODE END USART1_Init 2 */
+ sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+ sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+ if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sConfigOC.OCMode = TIM_OCMODE_PWM1;
+ sConfigOC.Pulse = 0;
+ sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+ if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM2_Init 2 */
+
+ /* USER CODE END TIM2_Init 2 */
+ HAL_TIM_MspPostInit(&htim2);
}
-/**
+/**
* Enable DMA controller clock
*/
-static void MX_DMA_Init(void)
+static void MX_DMA_Init(void)
{
/* DMA controller clock enable */
@@ -574,34 +1039,29 @@
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, DW_CTRL_Pin|SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2|GPIO_PIN_8, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(SPI_CS_GPIO_Port, SPI_CS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|SDA_Pin|SCL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|LED2_G_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|GPIO_PIN_14|RADIO_nRESET_Pin
+ |RADIO_NSS_Pin|GPIO_PIN_7, GPIO_PIN_RESET);
- /*Configure GPIO pin : PA0 */
- GPIO_InitStruct.Pin = GPIO_PIN_0;
+ /*Configure GPIO pins : PA0 PA15 */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- /*Configure GPIO pin : BAT_MEAS_Pin */
- GPIO_InitStruct.Pin = BAT_MEAS_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ /*Configure GPIO pins : PA2 PA8 */
+ GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_8;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(BAT_MEAS_GPIO_Port, &GPIO_InitStruct);
-
- /*Configure GPIO pins : SCL_Pin SDA_Pin */
- GPIO_InitStruct.Pin = SCL_Pin|SDA_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pin : SPI_CS_Pin */
@@ -624,12 +1084,26 @@
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(USER_KEY_GPIO_Port, &GPIO_InitStruct);
- /*Configure GPIO pins : MOTOR_Pin LED1_G_Pin LED1_R_Pin LED2_R_Pin */
- GPIO_InitStruct.Pin = MOTOR_Pin|LED1_G_Pin|LED1_R_Pin|LED2_R_Pin;
+ /*Configure GPIO pin : RADIO_BUSY_Pin */
+ GPIO_InitStruct.Pin = RADIO_BUSY_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_BUSY_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin PB14 RADIO_nRESET_Pin
+ RADIO_NSS_Pin PB7 */
+ GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|GPIO_PIN_14|RADIO_nRESET_Pin
+ |RADIO_NSS_Pin|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : RADIO_DIO1_Pin */
+ GPIO_InitStruct.Pin = RADIO_DIO1_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_DIO1_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pin : INPUT_5V_Pin */
GPIO_InitStruct.Pin = INPUT_5V_Pin;
@@ -637,22 +1111,19 @@
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
- /*Configure GPIO pins : DW_WKUP_Pin DW_CTRL_Pin LED2_G_Pin */
- GPIO_InitStruct.Pin = DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ /*Configure GPIO pins : SDA_Pin SCL_Pin */
+ GPIO_InitStruct.Pin = SDA_Pin|SCL_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /*Configure GPIO pin : PWR_ON_Pin */
- GPIO_InitStruct.Pin = PWR_ON_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = GPIO_PULLUP;
- HAL_GPIO_Init(PWR_ON_GPIO_Port, &GPIO_InitStruct);
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* EXTI interrupt init*/
- HAL_NVIC_SetPriority(EXTI0_1_IRQn, 1, 0);
+ HAL_NVIC_SetPriority(EXTI0_1_IRQn, 2, 0);
HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);
+
+ HAL_NVIC_SetPriority(EXTI2_3_IRQn, 1, 0);
+ HAL_NVIC_EnableIRQ(EXTI2_3_IRQn);
}
@@ -681,25 +1152,64 @@
/*Enter the Standby mode*/
HAL_PWR_EnterSTANDBYMode();
}
-extern float nomove_count;
-
+extern uint8_t tx_near_msg[80];
+float key_keeptime;
+extern float freqlost_count,range_lost_time;
+extern uint8_t lora_yingda_flag;
+uint8_t lora_yingdatime;
+extern uint8_t lora_chongfuyingda_flag;
+uint16_t no_data_chongqi_num;
+uint16_t anchor_send_num;
+uint8_t no_yingdatime;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
- static uint8_t i=0;
- i++;
- g_start_send_flag=1;
- lastpoll_count+=interval_count;
- if(lastpoll_count>LPTIMER_1S_COUNT-30)
- {
- lastpoll_count = slot_startcount;
- }
- __HAL_LPTIM_COMPARE_SET(&hlptim1, lastpoll_count);
-
- nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
- if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&imu_enable)
- {
- mcu_sleep();
- }
+// uint8_t pinlv;
+ SystemClock_Config();
+ lp_time++;
+ anchor_send_num++;
+ no_data_chongqi_num++;
+ stationary_num++;
+ if(Beepchixutime>0)
+ {
+ Beepchixutime--;
+ if(Beepchixutime==0)
+ {Beep_Off();}
+ }
+ if(no_yingdaflag==1)
+ {
+ no_yingdatime++;
+ if(no_yingdatime>=5)
+ {
+ no_yingdaflag=0;
+ no_yingdatime=0;
+ }
+ }
+
+ if( no_data_chongqi_num>600)
+ {NVIC_SystemReset();}
+
+ if(lp_time%(g_com_map[COM_INTERVAL]/1000)==0)
+ {
+
+ LoraReportPoll();
+ flag_onesecond = 1;
+
+// lora_tx_flag=1;
+// lora_txanchor_power_flag=0;
+// }
+// if(anchor_send_num>=3600)
+// {anchor_send_num=0;
+// lora_txanchor_power_flag=1;
+// lora_tx_flag=0;
+// bat_percent=Get_VDDVlotage();
+// }
+ }
+
+ if(stationary_num>=10)
+ {stationary_num=0;
+ stationary_flag=1;
+ }
+
}
/* USER CODE END 4 */
@@ -724,7 +1234,7 @@
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
-{
+{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
--
Gitblit v1.9.3