From 1b83e716601b4c7ba981a00be6ecf24a9d549d52 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期三, 20 一月 2021 10:18:56 +0800
Subject: [PATCH] V2.20 1.增加静止时间判定参数，测距有BUG抖动较大
---
Src/application/dw_app.c | 41 ++++++++++++++++++++++++++---------------
1 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/Src/application/dw_app.c b/Src/application/dw_app.c
index 8698bf8..0725258 100644
--- a/Src/application/dw_app.c
+++ b/Src/application/dw_app.c
@@ -69,9 +69,8 @@
#define FINAL_MSG_FINAL_TX_TS_IDX 18
#define FINAL_MSG_TS_LEN 4
-#define STARTPOLL REGPOLL
-#define SWITCHBASE_DIST
-//#define SWITCHBASE_ZHUANDIAN
+#define STARTPOLL REGPOLL//#define SWITCHBASE_DIST
+#define SWITCHBASE_ZHUANDIAN
enum enumtagstate
{
REGPOLL,
@@ -248,7 +247,7 @@
u16 mainbase_id;
int32_t mainbase_dist;
uint8_t trygetnearmsg_times;
-u16 nearbaseid_list[MAX_NEARBASE_NUM],mainbase_id,true_nearbase_idlist[MAX_NEARBASE_NUM];
+u16 mainbase_id,true_nearbase_idlist[MAX_NEARBASE_NUM],nearbaseid_list[MAX_NEARBASE_NUM],nearbaseid_list2[MAX_NEARBASE_NUM];
u8 FindNearBasePos(u16 baseid)
{
u8 i;
@@ -624,6 +623,7 @@
// tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
//tagslotpos=rx_buffer[TAGSLOTPOS];
memcpy(nearbaseid_list,&rx_buffer[NEARBASEID_INDEX],nearbase_num*2);
+ memcpy(nearbaseid_list2,&rx_buffer[NEARBASEID_INDEX],nearbase_num*2);
//slottime=ceil((nearbase_num+2)*0.3)+1;
//tyncpoll_time=tagslotpos*slottime;
//tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
@@ -637,10 +637,11 @@
extern float motor_keeptime;
uint8_t changemainbase_count=0,gotosleep_flag;
uint32_t frame_len;
+int32_t salvebase_mindist;
void NearPoll(void)
{
- uint32_t temp1,temp2,dw_systime,salvebase_mindist=999999,mindist_slavebaseid;
+ uint32_t temp1,temp2,dw_systime,mindist_slavebaseid;
uint32_t final_tx_time;
u32 start_poll;
@@ -648,7 +649,7 @@
dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);
tag_succ_times = 0;
-
+ salvebase_mindist=999999;
if(next_nearbase_num>=MAX_NEARBASE_NUM)
{
next_nearbase_num = MAX_NEARBASE_NUM-1;
@@ -727,6 +728,14 @@
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+nearbase_num*4], resp_rx_ts);
final_msg_set_ts(&tx_near_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
tx_near_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
+
+ if(rec_remotepara_state&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2))
+ {
+ para_update = 1;
+ tx_near_msg[TAGCONFIGSUCCESS_INDEX] = 1;
+ para_len = frame_len-22;
+ memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],para_len);
+ }
dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
@@ -742,14 +751,8 @@
mainbase_lost_count=0;
flag_finalsend=1;
memcpy(&mainbase_dist,&rx_buffer[DIST_IDX],4);
-
- if(rec_remotepara_state&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2))
- {
- para_update = 1;
- tx_near_msg[TAGCONFIGSUCCESS_INDEX] = 1;
- para_len = frame_len-22;
- memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],para_len);
- }
+
+
flag_getresponse=1;
//时间同步
tmp_time=tmp_time+450;
@@ -836,7 +839,7 @@
pack_length = rec_remotepara[2];
if(pack_msgtype==2)
{
- if( pack_index == 0x10)
+ if( pack_index == MOTOR_ONTIME_INDEX&&motor_keeptime==0)
{
motor_keeptime = rec_remotepara[3];
}else{
@@ -848,6 +851,13 @@
NVIC_SystemReset();
}
}
+ }
+ for(i=0;i<nearbase_num;i++)
+ {
+ if(nearbaseid_list[i]!=nearbaseid_list2[i])
+ {
+ tag_state = GETNEARMSG;
+ }
}
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
//HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
@@ -928,6 +938,7 @@
mainbase_id=rec_nearbaseid;
nearbase_num=rx_buffer[NEARBASENUM_INDEX];
memcpy(nearbaseid_list,&rx_buffer[NEARBASEID_INDEX],nearbase_num*2);
+ memcpy(nearbaseid_list2,&rx_buffer[NEARBASEID_INDEX],nearbase_num*2);
if(tagslotpos!=255)
tag_state = NEARPOLL;
}
--
Gitblit v1.9.3