From 30f954046d1fb066587d57f369bace347a27e829 Mon Sep 17 00:00:00 2001 From: WXK <287788329@qq.com> Date: 星期三, 12 六月 2024 17:09:43 +0800 Subject: [PATCH] V1.24 双spi开发完成，功能正常，之前出现死机是因为uwb再次用之前要关中断再开中断就行了。 --- MDK-ARM/L051/L051.htm | 190 +++++++++++++++++++++++------------------------ 1 files changed, 93 insertions(+), 97 deletions(-) diff --git a/MDK-ARM/L051/L051.htm b/MDK-ARM/L051/L051.htm index 921b39d..88cc2d5 100644 --- a/MDK-ARM/L051/L051.htm +++ b/MDK-ARM/L051/L051.htm @@ -3,7 +3,7 @@ <title>Static Call Graph - [L051\L051.axf]</title></head> <body><HR> <H1>Static Call Graph for image L051\L051.axf</H1><HR> -<BR><P>#<CALLGRAPH># ARM Linker, 5060750: Last Updated: Fri May 31 17:19:00 2024 +<BR><P>#<CALLGRAPH># ARM Linker, 5060750: Last Updated: Wed Jun 12 16:21:49 2024 <BR><P> <H3>Maximum Stack Usage = 512 bytes + Unknown(Cycles, Untraceable Function Pointers)</H3><H3> Call chain for Maximum Stack Depth:</H3> @@ -184,7 +184,7 @@ <P><STRONG><a name="[7a]"></a>__aeabi_uidivmod</STRONG> (Thumb, 44 bytes, Stack size 12 bytes, uidiv.o(.text)) <BR><BR>[Stack]<UL><LI>Max Depth = 12<LI>Call Chain = __aeabi_uidivmod </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[90]">>></a> dwt_initialise <LI><a href="#[be]">>></a> HAL_DMA_Init <LI><a href="#[bd]">>></a> HAL_DMA_DeInit @@ -227,7 +227,7 @@ <P><STRONG><a name="[a7]"></a>__aeabi_memcpy</STRONG> (Thumb, 36 bytes, Stack size 0 bytes, memcpya.o(.text)) <BR><BR>[Called By]<UL><LI><a href="#[a0]">>></a> GPS_ParseGGA -<LI><a href="#[c6]">>></a> MbxTagUwbRec +<LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[126]">>></a> LoraReportPoll <LI><a href="#[18e]">>></a> SYN_FrameInfo <LI><a href="#[2d]">>></a> UsartParseDataHandler @@ -657,7 +657,7 @@ <LI><a href="#[7e]">>></a> dwt_readrxtimestamp <LI><a href="#[85]">>></a> dwt_read32bitoffsetreg </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec </UL> <P><STRONG><a name="[86]"></a>Bat_Percent_Poll</STRONG> (Thumb, 28 bytes, Stack size 8 bytes, main.o(i.Bat_Percent_Poll)) @@ -693,7 +693,7 @@ </UL> <BR>[Calls]<UL><LI><a href="#[8b]">>></a> memcmp </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec </UL> <P><STRONG><a name="[f]"></a>DMA1_Channel2_3_IRQHandler</STRONG> (Thumb, 16 bytes, Stack size 8 bytes, stm32l0xx_it.o(i.DMA1_Channel2_3_IRQHandler)) @@ -1003,18 +1003,11 @@ <LI><a href="#[108]">>></a> UART_Start_Receive_DMA </UL> -<P><STRONG><a name="[c1]"></a>HAL_Delay</STRONG> (Thumb, 32 bytes, Stack size 16 bytes, stm32l0xx_hal.o(i.HAL_Delay)) -<BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = HAL_Delay +<P><STRONG><a name="[c1]"></a>HAL_Delay_nMS</STRONG> (Thumb, 16 bytes, Stack size 8 bytes, delay.o(i.HAL_Delay_nMS)) +<BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = HAL_Delay_nMS </UL> -<BR>[Calls]<UL><LI><a href="#[78]">>></a> HAL_GetTick -</UL> -<BR>[Called By]<UL><LI><a href="#[1e]">>></a> main -</UL> - -<P><STRONG><a name="[c2]"></a>HAL_Delay_nMS</STRONG> (Thumb, 22 bytes, Stack size 16 bytes, delay.o(i.HAL_Delay_nMS)) -<BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = HAL_Delay_nMS -</UL> -<BR>[Calls]<UL><LI><a href="#[78]">>></a> HAL_GetTick +<BR>[Calls]<UL><LI><a href="#[c2]">>></a> delay_us +<LI><a href="#[78]">>></a> HAL_GetTick </UL> <BR>[Called By]<UL><LI><a href="#[3d]">>></a> RadioSleep <LI><a href="#[37]">>></a> RadioRandom @@ -1057,12 +1050,11 @@ <LI><a href="#[b8]">>></a> HAL_ADC_MspDeInit </UL> -<P><STRONG><a name="[c4]"></a>HAL_GPIO_EXTI_Callback</STRONG> (Thumb, 88 bytes, Stack size 8 bytes, main.o(i.HAL_GPIO_EXTI_Callback)) +<P><STRONG><a name="[c4]"></a>HAL_GPIO_EXTI_Callback</STRONG> (Thumb, 66 bytes, Stack size 8 bytes, main.o(i.HAL_GPIO_EXTI_Callback)) <BR><BR>[Stack]<UL><LI>Max Depth = 156<LI>Call Chain = HAL_GPIO_EXTI_Callback ⇒ MbxTagUwbRec ⇒ Anchor_RecNearPoll ⇒ dwt_starttx ⇒ dwt_entersleepaftertx ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi </UL> -<BR>[Calls]<UL><LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin -<LI><a href="#[c6]">>></a> MbxTagUwbRec -<LI><a href="#[c7]">>></a> HAL_NVIC_SystemReset +<BR>[Calls]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec +<LI><a href="#[c6]">>></a> HAL_NVIC_SystemReset </UL> <BR>[Called By]<UL><LI><a href="#[94]">>></a> HAL_GPIO_EXTI_IRQHandler </UL> @@ -1090,11 +1082,10 @@ <LI><a href="#[11c]">>></a> LpusartDeInit </UL> -<P><STRONG><a name="[c5]"></a>HAL_GPIO_ReadPin</STRONG> (Thumb, 10 bytes, Stack size 0 bytes, stm32l0xx_hal_gpio.o(i.HAL_GPIO_ReadPin)) +<P><STRONG><a name="[110]"></a>HAL_GPIO_ReadPin</STRONG> (Thumb, 10 bytes, Stack size 0 bytes, stm32l0xx_hal_gpio.o(i.HAL_GPIO_ReadPin)) <BR><BR>[Called By]<UL><LI><a href="#[114]">>></a> IIC2_Wait_Ack -<LI><a href="#[110]">>></a> IIC2_Read_Byte +<LI><a href="#[10f]">>></a> IIC2_Read_Byte <LI><a href="#[126]">>></a> LoraReportPoll -<LI><a href="#[129]">>></a> UWB_RXStart <LI><a href="#[178]">>></a> SX126xWriteRegisters <LI><a href="#[18b]">>></a> SX126xWriteBuffer <LI><a href="#[163]">>></a> SX126xReadRegisters @@ -1102,7 +1093,6 @@ <LI><a href="#[4a]">>></a> RadioIrqProcess <LI><a href="#[143]">>></a> PowerDownDetect <LI><a href="#[115]">>></a> IdleTask -<LI><a href="#[c4]">>></a> HAL_GPIO_EXTI_Callback <LI><a href="#[17b]">>></a> SX126xWriteCommand <LI><a href="#[17d]">>></a> SX126xWakeup <LI><a href="#[17f]">>></a> SX126xWaitOnBusy @@ -1114,8 +1104,8 @@ <LI><a href="#[113]">>></a> IIC2_Stop <LI><a href="#[112]">>></a> IIC2_Start <LI><a href="#[111]">>></a> IIC2_Send_Byte -<LI><a href="#[110]">>></a> IIC2_Read_Byte -<LI><a href="#[10f]">>></a> IIC2_NAck +<LI><a href="#[10f]">>></a> IIC2_Read_Byte +<LI><a href="#[10e]">>></a> IIC2_NAck <LI><a href="#[10c]">>></a> IIC2_Ack <LI><a href="#[133]">>></a> MX_GPIO_Init <LI><a href="#[116]">>></a> Set4LEDColor_Off @@ -1137,13 +1127,13 @@ </UL> <P><STRONG><a name="[78]"></a>HAL_GetTick</STRONG> (Thumb, 6 bytes, Stack size 0 bytes, stm32l0xx_hal.o(i.HAL_GetTick)) -<BR><BR>[Called By]<UL><LI><a href="#[c1]">>></a> HAL_Delay -<LI><a href="#[109]">>></a> HAL_UART_Transmit +<BR><BR>[Called By]<UL><LI><a href="#[109]">>></a> HAL_UART_Transmit <LI><a href="#[af]">>></a> HAL_ADC_PollForConversion -<LI><a href="#[c2]">>></a> HAL_Delay_nMS +<LI><a href="#[c1]">>></a> HAL_Delay_nMS <LI><a href="#[e3]">>></a> HAL_RCC_OscConfig <LI><a href="#[e0]">>></a> HAL_RCC_ClockConfig <LI><a href="#[df]">>></a> HAL_RCCEx_PeriphCLKConfig +<LI><a href="#[c7]">>></a> HAL_IWDG_Init <LI><a href="#[b5]">>></a> HAL_ADCEx_EnableVREFINT <LI><a href="#[b4]">>></a> HAL_ADCEx_Calibration_Start <LI><a href="#[7c]">>></a> ADC_Enable @@ -1154,6 +1144,14 @@ <LI><a href="#[179]">>></a> SPI_WaitFlagStateUntilTimeout <LI><a href="#[10a]">>></a> UART_WaitOnFlagUntilTimeout <LI><a href="#[104]">>></a> UART_CheckIdleState +</UL> + +<P><STRONG><a name="[c7]"></a>HAL_IWDG_Init</STRONG> (Thumb, 94 bytes, Stack size 16 bytes, stm32l0xx_hal_iwdg.o(i.HAL_IWDG_Init)) +<BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = HAL_IWDG_Init +</UL> +<BR>[Calls]<UL><LI><a href="#[78]">>></a> HAL_GetTick +</UL> +<BR>[Called By]<UL><LI><a href="#[1e]">>></a> main </UL> <P><STRONG><a name="[12a]"></a>HAL_IWDG_Refresh</STRONG> (Thumb, 10 bytes, Stack size 0 bytes, stm32l0xx_hal_iwdg.o(i.HAL_IWDG_Refresh)) @@ -1202,7 +1200,7 @@ <LI><a href="#[ce]">>></a> Set4LEDColor <LI><a href="#[64]">>></a> __aeabi_ui2f <LI><a href="#[d0]">>></a> __aeabi_cfcmple -<LI><a href="#[c7]">>></a> HAL_NVIC_SystemReset +<LI><a href="#[c6]">>></a> HAL_NVIC_SystemReset <LI><a href="#[cf]">>></a> Yuying_Poll <LI><a href="#[ac]">>></a> GetLPTime <LI><a href="#[86]">>></a> Bat_Percent_Poll @@ -1303,7 +1301,7 @@ <LI><a href="#[c9]">>></a> HAL_InitTick </UL> -<P><STRONG><a name="[c7]"></a>HAL_NVIC_SystemReset</STRONG> (Thumb, 18 bytes, Stack size 0 bytes, stm32l0xx_hal_cortex.o(i.HAL_NVIC_SystemReset)) +<P><STRONG><a name="[c6]"></a>HAL_NVIC_SystemReset</STRONG> (Thumb, 18 bytes, Stack size 0 bytes, stm32l0xx_hal_cortex.o(i.HAL_NVIC_SystemReset)) <BR><BR>[Called By]<UL><LI><a href="#[12d]">>></a> LoraUp_Poll <LI><a href="#[115]">>></a> IdleTask <LI><a href="#[cd]">>></a> HAL_LPTIM_CompareMatchCallback @@ -1653,27 +1651,27 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = IIC2_Ack </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[10e]">>></a> delay_us +<LI><a href="#[c2]">>></a> delay_us </UL> -<BR>[Called By]<UL><LI><a href="#[110]">>></a> IIC2_Read_Byte +<BR>[Called By]<UL><LI><a href="#[10f]">>></a> IIC2_Read_Byte </UL> -<P><STRONG><a name="[10f]"></a>IIC2_NAck</STRONG> (Thumb, 62 bytes, Stack size 16 bytes, lis3dh_driver.o(i.IIC2_NAck)) +<P><STRONG><a name="[10e]"></a>IIC2_NAck</STRONG> (Thumb, 62 bytes, Stack size 16 bytes, lis3dh_driver.o(i.IIC2_NAck)) <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = IIC2_NAck </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[10e]">>></a> delay_us +<LI><a href="#[c2]">>></a> delay_us </UL> -<BR>[Called By]<UL><LI><a href="#[110]">>></a> IIC2_Read_Byte +<BR>[Called By]<UL><LI><a href="#[10f]">>></a> IIC2_Read_Byte </UL> -<P><STRONG><a name="[110]"></a>IIC2_Read_Byte</STRONG> (Thumb, 94 bytes, Stack size 24 bytes, lis3dh_driver.o(i.IIC2_Read_Byte)) +<P><STRONG><a name="[10f]"></a>IIC2_Read_Byte</STRONG> (Thumb, 94 bytes, Stack size 24 bytes, lis3dh_driver.o(i.IIC2_Read_Byte)) <BR><BR>[Stack]<UL><LI>Max Depth = 40<LI>Call Chain = IIC2_Read_Byte ⇒ IIC2_NAck </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin -<LI><a href="#[10e]">>></a> delay_us -<LI><a href="#[10f]">>></a> IIC2_NAck +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[c2]">>></a> delay_us +<LI><a href="#[10e]">>></a> IIC2_NAck <LI><a href="#[10c]">>></a> IIC2_Ack </UL> <BR>[Called By]<UL><LI><a href="#[121]">>></a> LIS3DH_ReadOneByte @@ -1683,7 +1681,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 24<LI>Call Chain = IIC2_Send_Byte </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[10e]">>></a> delay_us +<LI><a href="#[c2]">>></a> delay_us </UL> <BR>[Called By]<UL><LI><a href="#[122]">>></a> LIS3DH_WriteOneByte <LI><a href="#[121]">>></a> LIS3DH_ReadOneByte @@ -1693,7 +1691,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = IIC2_Start </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[10e]">>></a> delay_us +<LI><a href="#[c2]">>></a> delay_us </UL> <BR>[Called By]<UL><LI><a href="#[122]">>></a> LIS3DH_WriteOneByte <LI><a href="#[121]">>></a> LIS3DH_ReadOneByte @@ -1703,7 +1701,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = IIC2_Stop </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[10e]">>></a> delay_us +<LI><a href="#[c2]">>></a> delay_us </UL> <BR>[Called By]<UL><LI><a href="#[122]">>></a> LIS3DH_WriteOneByte <LI><a href="#[121]">>></a> LIS3DH_ReadOneByte @@ -1714,8 +1712,8 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 40<LI>Call Chain = IIC2_Wait_Ack ⇒ IIC2_Stop </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin -<LI><a href="#[10e]">>></a> delay_us +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[c2]">>></a> delay_us <LI><a href="#[113]">>></a> IIC2_Stop </UL> <BR>[Called By]<UL><LI><a href="#[122]">>></a> LIS3DH_WriteOneByte @@ -1725,13 +1723,13 @@ <P><STRONG><a name="[115]"></a>IdleTask</STRONG> (Thumb, 170 bytes, Stack size 24 bytes, main.o(i.IdleTask)) <BR><BR>[Stack]<UL><LI>Max Depth = 160<LI>Call Chain = IdleTask ⇒ GetLPTime ⇒ __aeabi_dmul ⇒ _double_epilogue ⇒ _double_round </UL> -<BR>[Calls]<UL><LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<BR>[Calls]<UL><LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[116]">>></a> Set4LEDColor_Off <LI><a href="#[119]">>></a> UART_CheckSend <LI><a href="#[118]">>></a> UART_CheckReceive <LI><a href="#[117]">>></a> LoraInit <LI><a href="#[f3]">>></a> HAL_UART_DMAStop -<LI><a href="#[c7]">>></a> HAL_NVIC_SystemReset +<LI><a href="#[c6]">>></a> HAL_NVIC_SystemReset <LI><a href="#[ac]">>></a> GetLPTime <LI><a href="#[8b]">>></a> memcmp </UL> @@ -1754,7 +1752,7 @@ <P><STRONG><a name="[11d]"></a>LIS3DH_Data_Init</STRONG> (Thumb, 98 bytes, Stack size 8 bytes, lis3dh_driver.o(i.LIS3DH_Data_Init)) <BR><BR>[Stack]<UL><LI>Max Depth = 72<LI>Call Chain = LIS3DH_Data_Init ⇒ LIS3DH_WriteReg ⇒ LIS3DH_WriteOneByte ⇒ IIC2_Wait_Ack ⇒ IIC2_Stop </UL> -<BR>[Calls]<UL><LI><a href="#[10e]">>></a> delay_us +<BR>[Calls]<UL><LI><a href="#[c2]">>></a> delay_us <LI><a href="#[11f]">>></a> LIS3DH_WriteReg <LI><a href="#[11e]">>></a> LIS3DH_GetWHO_AM_I </UL> @@ -1776,7 +1774,7 @@ <LI><a href="#[113]">>></a> IIC2_Stop <LI><a href="#[112]">>></a> IIC2_Start <LI><a href="#[111]">>></a> IIC2_Send_Byte -<LI><a href="#[110]">>></a> IIC2_Read_Byte +<LI><a href="#[10f]">>></a> IIC2_Read_Byte </UL> <BR>[Called By]<UL><LI><a href="#[120]">>></a> LIS3DH_ReadReg </UL> @@ -1792,7 +1790,7 @@ <P><STRONG><a name="[122]"></a>LIS3DH_WriteOneByte</STRONG> (Thumb, 52 bytes, Stack size 16 bytes, lis3dh_driver.o(i.LIS3DH_WriteOneByte)) <BR><BR>[Stack]<UL><LI>Max Depth = 56<LI>Call Chain = LIS3DH_WriteOneByte ⇒ IIC2_Wait_Ack ⇒ IIC2_Stop </UL> -<BR>[Calls]<UL><LI><a href="#[10e]">>></a> delay_us +<BR>[Calls]<UL><LI><a href="#[c2]">>></a> delay_us <LI><a href="#[114]">>></a> IIC2_Wait_Ack <LI><a href="#[113]">>></a> IIC2_Stop <LI><a href="#[112]">>></a> IIC2_Start @@ -1854,12 +1852,11 @@ <BR><BR>[Called By]<UL><LI><a href="#[126]">>></a> LoraReportPoll </UL> -<P><STRONG><a name="[126]"></a>LoraReportPoll</STRONG> (Thumb, 432 bytes, Stack size 32 bytes, dw_mbx_tag.o(i.LoraReportPoll)) -<BR><BR>[Stack]<UL><LI>Max Depth = 124<LI>Call Chain = LoraReportPoll ⇒ UWB_RXStart ⇒ dwt_rxenable ⇒ dwt_forcetrxoff ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi +<P><STRONG><a name="[126]"></a>LoraReportPoll</STRONG> (Thumb, 424 bytes, Stack size 32 bytes, dw_mbx_tag.o(i.LoraReportPoll)) +<BR><BR>[Stack]<UL><LI>Max Depth = 132<LI>Call Chain = LoraReportPoll ⇒ UWB_RXStart ⇒ dwt_rxenable ⇒ dwt_forcetrxoff ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi </UL> -<BR>[Calls]<UL><LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<BR>[Calls]<UL><LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[125]">>></a> SwitchLoraSettings -<LI><a href="#[33]">>></a> RadioGetStatus <LI><a href="#[12a]">>></a> HAL_IWDG_Refresh <LI><a href="#[127]">>></a> TagListUpdate <LI><a href="#[128]">>></a> LoraReportFreqPoll @@ -1899,7 +1896,7 @@ <LI><a href="#[9b]">>></a> FLASH_Write <LI><a href="#[95]">>></a> FLASH_Prepare <LI><a href="#[12e]">>></a> delay_ms -<LI><a href="#[c7]">>></a> HAL_NVIC_SystemReset +<LI><a href="#[c6]">>></a> HAL_NVIC_SystemReset <LI><a href="#[9f]">>></a> Delay_Ms <LI><a href="#[88]">>></a> Cal_CRC16 <LI><a href="#[8b]">>></a> memcmp @@ -1910,7 +1907,7 @@ </UL> <P><STRONG><a name="[12f]"></a>Lora_Send_Poll</STRONG> (Thumb, 52 bytes, Stack size 8 bytes, main.o(i.Lora_Send_Poll)) -<BR><BR>[Stack]<UL><LI>Max Depth = 132<LI>Call Chain = Lora_Send_Poll ⇒ LoraReportPoll ⇒ UWB_RXStart ⇒ dwt_rxenable ⇒ dwt_forcetrxoff ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi +<BR><BR>[Stack]<UL><LI>Max Depth = 140<LI>Call Chain = Lora_Send_Poll ⇒ LoraReportPoll ⇒ UWB_RXStart ⇒ dwt_rxenable ⇒ dwt_forcetrxoff ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi </UL> <BR>[Calls]<UL><LI><a href="#[126]">>></a> LoraReportPoll </UL> @@ -1937,7 +1934,7 @@ <BR>[Called By]<UL><LI><a href="#[11a]">>></a> Jingzhi_Poll </UL> -<P><STRONG><a name="[c6]"></a>MbxTagUwbRec</STRONG> (Thumb, 342 bytes, Stack size 24 bytes, dw_mbx_tag.o(i.MbxTagUwbRec)) +<P><STRONG><a name="[c5]"></a>MbxTagUwbRec</STRONG> (Thumb, 342 bytes, Stack size 24 bytes, dw_mbx_tag.o(i.MbxTagUwbRec)) <BR><BR>[Stack]<UL><LI>Max Depth = 148<LI>Call Chain = MbxTagUwbRec ⇒ Anchor_RecNearPoll ⇒ dwt_starttx ⇒ dwt_entersleepaftertx ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi </UL> <BR>[Calls]<UL><LI><a href="#[8a]">>></a> CmpTagInList @@ -1959,7 +1956,7 @@ <P><STRONG><a name="[1]"></a>NMI_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32l0xx_it.o(i.NMI_Handler)) <BR>[Address Reference Count : 1]<UL><LI> startup_stm32l051xx.o(RESET) </UL> -<P><STRONG><a name="[29]"></a>OnRxDone</STRONG> (Thumb, 582 bytes, Stack size 48 bytes, lora.o(i.OnRxDone)) +<P><STRONG><a name="[29]"></a>OnRxDone</STRONG> (Thumb, 572 bytes, Stack size 48 bytes, lora.o(i.OnRxDone)) <BR><BR>[Stack]<UL><LI>Max Depth = 176<LI>Call Chain = OnRxDone ⇒ __aeabi_dmul ⇒ _double_epilogue ⇒ _double_round </UL> <BR>[Calls]<UL><LI><a href="#[66]">>></a> __aeabi_ui2d @@ -2023,7 +2020,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 60<LI>Call Chain = PowerDownDetect ⇒ Set4LEDColor ⇒ RGB_Set ⇒ RGB_Set_YELLOW </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[ce]">>></a> Set4LEDColor <LI><a href="#[12e]">>></a> delay_ms </UL> @@ -2145,8 +2142,7 @@ </UL> <BR>[Calls]<UL><LI><a href="#[154]">>></a> SX126xGetOperatingMode </UL> -<BR>[Called By]<UL><LI><a href="#[126]">>></a> LoraReportPoll -<LI><a href="#[117]">>></a> LoraInit +<BR>[Called By]<UL><LI><a href="#[117]">>></a> LoraInit </UL> <BR>[Address Reference Count : 1]<UL><LI> radio.o(.constdata) </UL> @@ -2168,7 +2164,7 @@ <P><STRONG><a name="[4a]"></a>RadioIrqProcess</STRONG> (Thumb, 216 bytes, Stack size 24 bytes, radio.o(i.RadioIrqProcess)) <BR><BR>[Stack]<UL><LI>Max Depth = 240<LI>Call Chain = RadioIrqProcess ⇒ SX126xGetPayload ⇒ SX126xGetRxBufferStatus ⇒ SX126xReadRegister ⇒ SX126xReadRegisters ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> -<BR>[Calls]<UL><LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<BR>[Calls]<UL><LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[15d]">>></a> SX126xGetPayload <LI><a href="#[15e]">>></a> SX126xGetPacketStatus <LI><a href="#[154]">>></a> SX126xGetOperatingMode @@ -2186,7 +2182,7 @@ <LI><a href="#[3d]">>></a> RadioSleep <LI><a href="#[34]">>></a> RadioSetModem <LI><a href="#[3f]">>></a> RadioRx -<LI><a href="#[c2]">>></a> HAL_Delay_nMS +<LI><a href="#[c1]">>></a> HAL_Delay_nMS </UL> <BR>[Address Reference Count : 1]<UL><LI> radio.o(.constdata) </UL> @@ -2200,7 +2196,7 @@ <LI><a href="#[161]">>></a> SX126xGetRssiInst <LI><a href="#[3d]">>></a> RadioSleep <LI><a href="#[34]">>></a> RadioSetModem -<LI><a href="#[c2]">>></a> HAL_Delay_nMS +<LI><a href="#[c1]">>></a> HAL_Delay_nMS </UL> <BR>[Address Reference Count : 1]<UL><LI> radio.o(.constdata) </UL> @@ -2346,7 +2342,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 184<LI>Call Chain = RadioSleep ⇒ SX126xSetSleep ⇒ SX126xWriteCommand ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[173]">>></a> SX126xSetSleep -<LI><a href="#[c2]">>></a> HAL_Delay_nMS +<LI><a href="#[c1]">>></a> HAL_Delay_nMS </UL> <BR>[Called By]<UL><LI><a href="#[37]">>></a> RadioRandom <LI><a href="#[36]">>></a> RadioIsChannelFree @@ -2527,7 +2523,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 168<LI>Call Chain = SX126xReadBuffer ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[185]">>></a> SpiInOut <LI><a href="#[17f]">>></a> SX126xWaitOnBusy <LI><a href="#[17c]">>></a> SX126xCheckDeviceReady @@ -2539,7 +2535,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 168<LI>Call Chain = SX126xReadCommand ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[185]">>></a> SpiInOut <LI><a href="#[17f]">>></a> SX126xWaitOnBusy <LI><a href="#[17c]">>></a> SX126xCheckDeviceReady @@ -2564,7 +2560,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 168<LI>Call Chain = SX126xReadRegisters ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[185]">>></a> SpiInOut <LI><a href="#[17f]">>></a> SX126xWaitOnBusy <LI><a href="#[17c]">>></a> SX126xCheckDeviceReady @@ -2574,11 +2570,11 @@ </UL> <P><STRONG><a name="[183]"></a>SX126xReset</STRONG> (Thumb, 50 bytes, Stack size 16 bytes, sx126x-board.o(i.SX126xReset)) -<BR><BR>[Stack]<UL><LI>Max Depth = 32<LI>Call Chain = SX126xReset ⇒ HAL_Delay_nMS +<BR><BR>[Stack]<UL><LI>Max Depth = 24<LI>Call Chain = SX126xReset ⇒ HAL_Delay_nMS </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[10e]">>></a> delay_us -<LI><a href="#[c2]">>></a> HAL_Delay_nMS +<LI><a href="#[c2]">>></a> delay_us +<LI><a href="#[c1]">>></a> HAL_Delay_nMS </UL> <BR>[Called By]<UL><LI><a href="#[155]">>></a> SX126xInit </UL> @@ -2841,7 +2837,7 @@ <P><STRONG><a name="[17f]"></a>SX126xWaitOnBusy</STRONG> (Thumb, 22 bytes, Stack size 16 bytes, sx126x-board.o(i.SX126xWaitOnBusy)) <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = SX126xWaitOnBusy </UL> -<BR>[Calls]<UL><LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<BR>[Calls]<UL><LI><a href="#[110]">>></a> HAL_GPIO_ReadPin </UL> <BR>[Called By]<UL><LI><a href="#[178]">>></a> SX126xWriteRegisters <LI><a href="#[18b]">>></a> SX126xWriteBuffer @@ -2857,7 +2853,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 136<LI>Call Chain = SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[185]">>></a> SpiInOut <LI><a href="#[17f]">>></a> SX126xWaitOnBusy </UL> @@ -2869,7 +2865,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 168<LI>Call Chain = SX126xWriteBuffer ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[185]">>></a> SpiInOut <LI><a href="#[17f]">>></a> SX126xWaitOnBusy <LI><a href="#[17c]">>></a> SX126xCheckDeviceReady @@ -2881,7 +2877,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 168<LI>Call Chain = SX126xWriteCommand ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[185]">>></a> SpiInOut <LI><a href="#[17f]">>></a> SX126xWaitOnBusy <LI><a href="#[17c]">>></a> SX126xCheckDeviceReady @@ -2926,7 +2922,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 168<LI>Call Chain = SX126xWriteRegisters ⇒ SX126xCheckDeviceReady ⇒ SX126xWakeup ⇒ SpiInOut ⇒ HAL_SPI_TransmitReceive ⇒ SPI_EndRxTxTransaction ⇒ SPI_WaitFlagStateUntilTimeout </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin +<LI><a href="#[110]">>></a> HAL_GPIO_ReadPin <LI><a href="#[185]">>></a> SpiInOut <LI><a href="#[17f]">>></a> SX126xWaitOnBusy <LI><a href="#[17c]">>></a> SX126xCheckDeviceReady @@ -2963,7 +2959,7 @@ <BR><BR>[Stack]<UL><LI>Max Depth = 36<LI>Call Chain = Set4LEDColor ⇒ RGB_Set ⇒ RGB_Set_YELLOW </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin -<LI><a href="#[10e]">>></a> delay_us +<LI><a href="#[c2]">>></a> delay_us <LI><a href="#[14b]">>></a> RGB_Set <LI><a href="#[149]">>></a> RGB_Rst </UL> @@ -3080,7 +3076,7 @@ <P><STRONG><a name="[119]"></a>UART_CheckSend</STRONG> (Thumb, 140 bytes, Stack size 16 bytes, usart.o(i.UART_CheckSend)) <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = UART_CheckSend </UL> -<BR>[Calls]<UL><LI><a href="#[10e]">>></a> delay_us +<BR>[Calls]<UL><LI><a href="#[c2]">>></a> delay_us </UL> <BR>[Called By]<UL><LI><a href="#[115]">>></a> IdleTask </UL> @@ -3131,11 +3127,10 @@ </UL> <BR>[Address Reference Count : 1]<UL><LI> startup_stm32l051xx.o(RESET) </UL> -<P><STRONG><a name="[129]"></a>UWB_RXStart</STRONG> (Thumb, 66 bytes, Stack size 8 bytes, dw_app.o(i.UWB_RXStart)) -<BR><BR>[Stack]<UL><LI>Max Depth = 92<LI>Call Chain = UWB_RXStart ⇒ dwt_rxenable ⇒ dwt_forcetrxoff ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi +<P><STRONG><a name="[129]"></a>UWB_RXStart</STRONG> (Thumb, 60 bytes, Stack size 16 bytes, dw_app.o(i.UWB_RXStart)) +<BR><BR>[Stack]<UL><LI>Max Depth = 100<LI>Call Chain = UWB_RXStart ⇒ dwt_rxenable ⇒ dwt_forcetrxoff ⇒ dwt_write32bitoffsetreg ⇒ dwt_writetodevice ⇒ writetospi </UL> -<BR>[Calls]<UL><LI><a href="#[c5]">>></a> HAL_GPIO_ReadPin -<LI><a href="#[19c]">>></a> UWB_Wkup +<BR>[Calls]<UL><LI><a href="#[19c]">>></a> UWB_Wkup <LI><a href="#[13c]">>></a> dwt_setrxtimeout <LI><a href="#[13b]">>></a> dwt_setinterrupt <LI><a href="#[13d]">>></a> dwt_rxenable @@ -3148,7 +3143,7 @@ <P><STRONG><a name="[19c]"></a>UWB_Wkup</STRONG> (Thumb, 44 bytes, Stack size 16 bytes, dw_app.o(i.UWB_Wkup)) <BR><BR>[Stack]<UL><LI>Max Depth = 76<LI>Call Chain = UWB_Wkup ⇒ dwt_readdevid ⇒ dwt_read32bitoffsetreg ⇒ dwt_readfromdevice ⇒ readfromspi </UL> -<BR>[Calls]<UL><LI><a href="#[10e]">>></a> delay_us +<BR>[Calls]<UL><LI><a href="#[c2]">>></a> delay_us <LI><a href="#[19d]">>></a> dwt_readdevid </UL> <BR>[Called By]<UL><LI><a href="#[129]">>></a> UWB_RXStart @@ -3335,7 +3330,7 @@ <P><STRONG><a name="[12e]"></a>delay_ms</STRONG> (Thumb, 14 bytes, Stack size 8 bytes, dw_driver.o(i.delay_ms)) <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = delay_ms </UL> -<BR>[Calls]<UL><LI><a href="#[10e]">>></a> delay_us +<BR>[Calls]<UL><LI><a href="#[c2]">>></a> delay_us </UL> <BR>[Called By]<UL><LI><a href="#[18e]">>></a> SYN_FrameInfo <LI><a href="#[2d]">>></a> UsartParseDataHandler @@ -3349,20 +3344,21 @@ <LI><a href="#[29]">>></a> OnRxDone </UL> -<P><STRONG><a name="[10e]"></a>delay_us</STRONG> (Thumb, 140 bytes, Stack size 0 bytes, lis3dh_driver.o(i.delay_us)) +<P><STRONG><a name="[c2]"></a>delay_us</STRONG> (Thumb, 140 bytes, Stack size 0 bytes, lis3dh_driver.o(i.delay_us)) <BR><BR>[Called By]<UL><LI><a href="#[122]">>></a> LIS3DH_WriteOneByte <LI><a href="#[11d]">>></a> LIS3DH_Data_Init <LI><a href="#[114]">>></a> IIC2_Wait_Ack <LI><a href="#[113]">>></a> IIC2_Stop <LI><a href="#[112]">>></a> IIC2_Start <LI><a href="#[111]">>></a> IIC2_Send_Byte -<LI><a href="#[110]">>></a> IIC2_Read_Byte -<LI><a href="#[10f]">>></a> IIC2_NAck +<LI><a href="#[10f]">>></a> IIC2_Read_Byte +<LI><a href="#[10e]">>></a> IIC2_NAck <LI><a href="#[10c]">>></a> IIC2_Ack <LI><a href="#[ce]">>></a> Set4LEDColor <LI><a href="#[19c]">>></a> UWB_Wkup <LI><a href="#[119]">>></a> UART_CheckSend <LI><a href="#[12e]">>></a> delay_ms +<LI><a href="#[c1]">>></a> HAL_Delay_nMS <LI><a href="#[183]">>></a> SX126xReset </UL> @@ -3391,7 +3387,7 @@ </UL> <BR>[Calls]<UL><LI><a href="#[1a1]">>></a> _dwt_aonarrayupload </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[1e]">>></a> main </UL> @@ -3412,7 +3408,7 @@ <LI><a href="#[1b0]">>></a> dwt_syncrxbufptrs <LI><a href="#[85]">>></a> dwt_read32bitoffsetreg </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[129]">>></a> UWB_RXStart <LI><a href="#[13d]">>></a> dwt_rxenable </UL> @@ -3449,7 +3445,7 @@ </UL> <BR>[Calls]<UL><LI><a href="#[1a6]">>></a> dwt_readfromdevice </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[7d]">>></a> Anchor_RecNearPoll <LI><a href="#[13b]">>></a> dwt_setinterrupt <LI><a href="#[19d]">>></a> dwt_readdevid @@ -3489,7 +3485,7 @@ </UL> <BR>[Calls]<UL><LI><a href="#[1a6]">>></a> dwt_readfromdevice </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec </UL> <P><STRONG><a name="[7e]"></a>dwt_readrxtimestamp</STRONG> (Thumb, 16 bytes, Stack size 8 bytes, deca_device.o(i.dwt_readrxtimestamp)) @@ -3508,7 +3504,7 @@ <LI><a href="#[1a6]">>></a> dwt_readfromdevice <LI><a href="#[13e]">>></a> dwt_forcetrxoff </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[129]">>></a> UWB_RXStart </UL> @@ -3526,7 +3522,7 @@ <BR>[Calls]<UL><LI><a href="#[139]">>></a> dwt_write32bitoffsetreg <LI><a href="#[85]">>></a> dwt_read32bitoffsetreg </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[129]">>></a> UWB_RXStart </UL> @@ -3545,7 +3541,7 @@ <LI><a href="#[1a4]">>></a> dwt_write16bitoffsetreg <LI><a href="#[1a6]">>></a> dwt_readfromdevice </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[129]">>></a> UWB_RXStart </UL> @@ -3598,7 +3594,7 @@ </UL> <BR>[Calls]<UL><LI><a href="#[1a2]">>></a> dwt_writetodevice </UL> -<BR>[Called By]<UL><LI><a href="#[c6]">>></a> MbxTagUwbRec +<BR>[Called By]<UL><LI><a href="#[c5]">>></a> MbxTagUwbRec <LI><a href="#[82]">>></a> dwt_writetxfctrl <LI><a href="#[13b]">>></a> dwt_setinterrupt <LI><a href="#[7f]">>></a> dwt_setdelayedtrxtime @@ -3673,12 +3669,11 @@ </UL> <BR>[Address Reference Count : 1]<UL><LI> printfa.o(i.__0printf) </UL> -<P><STRONG><a name="[1e]"></a>main</STRONG> (Thumb, 388 bytes, Stack size 32 bytes, main.o(i.main)) +<P><STRONG><a name="[1e]"></a>main</STRONG> (Thumb, 406 bytes, Stack size 32 bytes, main.o(i.main)) <BR><BR>[Stack]<UL><LI>Max Depth = 512<LI>Call Chain = main ⇒ Lpuart_rx_Poll ⇒ GPS_RecvFsm ⇒ GPS_ParseGGA ⇒ atof ⇒ __strtod_int ⇒ _local_sscanf ⇒ _scanf_real </UL> <BR>[Calls]<UL><LI><a href="#[10d]">>></a> HAL_GPIO_WritePin <LI><a href="#[bc]">>></a> HAL_GPIO_Init -<LI><a href="#[c1]">>></a> HAL_Delay <LI><a href="#[11d]">>></a> LIS3DH_Data_Init <LI><a href="#[138]">>></a> MX_USART5_UART_Init <LI><a href="#[136]">>></a> MX_USART1_UART_Init @@ -3706,6 +3701,7 @@ <LI><a href="#[db]">>></a> HAL_LPTIM_TimeOut_Start_IT <LI><a href="#[d8]">>></a> HAL_LPTIM_Init <LI><a href="#[c8]">>></a> HAL_Init +<LI><a href="#[c7]">>></a> HAL_IWDG_Init <LI><a href="#[195]">>></a> TTSchaxun_Busy <LI><a href="#[193]">>></a> SystemClock_Config <LI><a href="#[144]">>></a> Program_Init -- Gitblit v1.9.3