From 30f954046d1fb066587d57f369bace347a27e829 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期三, 12 六月 2024 17:09:43 +0800
Subject: [PATCH] V1.24 双spi开发完成，功能正常，之前出现死机是因为uwb再次用之前要关中断再开中断就行了。
---
Src/stm32l0xx_it.c | 53 ++++++++++++++++++++++++++++++++++++++---------------
1 files changed, 38 insertions(+), 15 deletions(-)
diff --git a/Src/stm32l0xx_it.c b/Src/stm32l0xx_it.c
index 761c2bb..96f8b50 100644
--- a/Src/stm32l0xx_it.c
+++ b/Src/stm32l0xx_it.c
@@ -43,6 +43,10 @@
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
float nomove_count=0;
+volatile uint16_t rx_len ; //接收一帧数据的长度
+volatile uint8_t recv_end_flag; //一帧数据接收完成标志
+extern uint8_t GPS_GGAdate[200];
+
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
@@ -57,13 +61,13 @@
/* External variables --------------------------------------------------------*/
extern LPTIM_HandleTypeDef hlptim1;
+extern DMA_HandleTypeDef hdma_lpuart1_rx;
+extern DMA_HandleTypeDef hdma_lpuart1_tx;
extern DMA_HandleTypeDef hdma_usart1_rx;
extern DMA_HandleTypeDef hdma_usart1_tx;
-extern DMA_HandleTypeDef hdma_usart5_rx;
-extern DMA_HandleTypeDef hdma_usart5_tx;
extern UART_HandleTypeDef hlpuart1;
extern UART_HandleTypeDef huart1;
-extern UART_HandleTypeDef huart5;
+extern TIM_HandleTypeDef htim6;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
@@ -170,6 +174,7 @@
/* USER CODE BEGIN EXTI4_15_IRQn 0 */
/* USER CODE END EXTI4_15_IRQn 0 */
+ HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_9);
HAL_GPIO_EXTI_IRQHandler(RADIO_DIO1_Pin);
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_12);
/* USER CODE BEGIN EXTI4_15_IRQn 1 */
@@ -200,8 +205,8 @@
/* USER CODE BEGIN DMA1_Channel4_5_6_7_IRQn 0 */
/* USER CODE END DMA1_Channel4_5_6_7_IRQn 0 */
- HAL_DMA_IRQHandler(&hdma_usart5_rx);
- HAL_DMA_IRQHandler(&hdma_usart5_tx);
+ HAL_DMA_IRQHandler(&hdma_lpuart1_rx);
+ HAL_DMA_IRQHandler(&hdma_lpuart1_tx);
/* USER CODE BEGIN DMA1_Channel4_5_6_7_IRQn 1 */
/* USER CODE END DMA1_Channel4_5_6_7_IRQn 1 */
@@ -222,17 +227,17 @@
}
/**
- * @brief This function handles USART4 and USART5 interrupt.
+ * @brief This function handles TIM6 global interrupt.
*/
-void USART4_5_IRQHandler(void)
+void TIM6_IRQHandler(void)
{
- /* USER CODE BEGIN USART4_5_IRQn 0 */
-__HAL_UART_CLEAR_IDLEFLAG(&huart1);
- /* USER CODE END USART4_5_IRQn 0 */
- HAL_UART_IRQHandler(&huart5);
- /* USER CODE BEGIN USART4_5_IRQn 1 */
+ /* USER CODE BEGIN TIM6_IRQn 0 */
- /* USER CODE END USART4_5_IRQn 1 */
+ /* USER CODE END TIM6_IRQn 0 */
+ HAL_TIM_IRQHandler(&htim6);
+ /* USER CODE BEGIN TIM6_IRQn 1 */
+
+ /* USER CODE END TIM6_IRQn 1 */
}
/**
@@ -255,7 +260,18 @@
void LPUART1_IRQHandler(void)
{
/* USER CODE BEGIN LPUART1_IRQn 0 */
-
+ uint32_t tmp_flag = 0;
+ uint32_t temp;
+ tmp_flag =__HAL_UART_GET_FLAG(&hlpuart1,UART_FLAG_IDLE); //获取IDLE标志位
+ if((tmp_flag != RESET))//idle标志被置位
+ {
+ __HAL_UART_CLEAR_IDLEFLAG(&hlpuart1);//清除标志位
+ HAL_UART_DMAStop(&hlpuart1); // 停止DMA传输，防止
+ temp = __HAL_DMA_GET_COUNTER(&hdma_lpuart1_rx);// 获取DMA中未传输的数据个数
+ rx_len = LPUART_SIZE - temp; //总计数减去未传输的数据个数，得到已经接收的数据个数
+ recv_end_flag = 1; // 接受完成标志位置1
+// HAL_UART_Receive_DMA(&hlpuart1,GPS_GGAdate,LPUART_SIZE);//重新打开DMA接收
+ }
/* USER CODE END LPUART1_IRQn 0 */
HAL_UART_IRQHandler(&hlpuart1);
/* USER CODE BEGIN LPUART1_IRQn 1 */
@@ -264,5 +280,12 @@
}
/* USER CODE BEGIN 1 */
-
+extern u8 uwb_rx_remaintime_ms;
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ if(uwb_rx_remaintime_ms>0)
+ {
+ uwb_rx_remaintime_ms--;
+ }
+}
/* USER CODE END 1 */
--
Gitblit v1.9.3