From 398a9412436a844e443a31eb0e55d5cd108eac5f Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期五, 04 六月 2021 09:58:23 +0800
Subject: [PATCH] 测试临近切换模式
---
Src/application/dw_app.c | 184 +++++++++++++++++++++++++++++++--------------
1 files changed, 125 insertions(+), 59 deletions(-)
diff --git a/Src/application/dw_app.c b/Src/application/dw_app.c
index c102ec6..1511b31 100644
--- a/Src/application/dw_app.c
+++ b/Src/application/dw_app.c
@@ -70,13 +70,15 @@
#define FINAL_MSG_TS_LEN 4
#define STARTPOLL REGPOLL//#define SWITCHBASE_DIST
-#define SWITCHBASE_ZHUANDIAN
+//#define SWITCHBASE_ZHUANDIAN
+#define SWITCHBASE_DIST
enum enumtagstate
{
REGPOLL,
DISCPOLL,
GETNEARMSG,
NEARPOLL,
+ SINGLEPOLL,
}tag_state=STARTPOLL;
static dwt_config_t config = {
2, /* Channel number. */
@@ -94,7 +96,7 @@
static uint8_t tx_sync_msg[14] = {0};
static uint8_t tx_final_msg[60] = {0};
static uint8_t tx_resp_msg[22] = {0};
- uint8_t tx_near_msg[80] = {0};
+ uint8_t tx_near_msg[180] = {0};
static uint32_t frame_seq_nb = 0;
static uint32_t status_reg = 0;
@@ -245,7 +247,7 @@
u16 ancid_list[TAG_NUM_IN_SYS];
u8 nearbase_num;
u16 mainbase_id;
-int32_t mainbase_dist;
+int32_t mainbase_dist,base_mindist;
uint8_t trygetnearmsg_times;
u16 mainbase_id,true_nearbase_idlist[MAX_NEARBASE_NUM],nearbaseid_list[MAX_NEARBASE_NUM],nearbaseid_list2[MAX_NEARBASE_NUM];
u8 FindNearBasePos(u16 baseid)
@@ -469,25 +471,54 @@
u32 rec_tagpos_binary;
int16_t offset=4700,temptimer;
u8 motor_state,rec_remotepara_state,rec_remotepara[80];
+
+
+#define SINGLEPOLL_BASENUM 15
+uint16_t singlepoll_baseid[20]={0x8166,0x9804,0x9689,0x9686,0x8279,0x9815,0x9803,0x9814,0x9687,0x9774,0x8278,0x9743,0x9688,0x9771,0x8277};
+int32_t singlepoll_basedist[20];
+
+extern u8 userkey_state;
+extern float motor_keeptime;
+uint8_t changemainbase_count=0,gotosleep_flag,singlepoll_i;
+uint32_t frame_len;
+int32_t salvebase_mindist;
+int16_t intheight;
void Poll(void)
{
uint32_t frame_len;
uint32_t final_tx_time;
u32 start_poll;
int32_t mindist=999999,minid=-1,temp_dist;
- u8 i,getsync_flag=0;
+ u8 i,j,getsync_flag=0;
dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);
tag_succ_times = 0;
-
- for(i=0;i<3;i++)
+ frame_seq_nb++;
+ for(singlepoll_i=0;singlepoll_i<SINGLEPOLL_BASENUM;singlepoll_i++)
{
/* Write frame data to DW1000 and prepare transmission. See NOTE 7 below. */
- tx_poll_msg[ANC_TYPE_IDX] = i;
- dwt_writetxdata(sizeof(tx_poll_msg), tx_poll_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
- dwt_writetxfctrl(sizeof(tx_poll_msg), 0);//设置超宽带发送数据长度
+ nearbase_num = SINGLEPOLL_BASENUM;
+
+ tx_near_msg[BATTARY_IDX] = bat_percent;
+ tx_near_msg[BUTTON_IDX] = userkey_state|stationary_flag<<1|gotosleep_flag<<2;
+ tx_near_msg[SEQUENCE_IDX] = frame_seq_nb;
+ tx_near_msg[SEQUENCEH_IDX] = (frame_seq_nb)>>8;
+ tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
+ memcpy(&tx_near_msg[NEARBASEID_INDEX],&singlepoll_baseid,nearbase_num*2);
+ memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*2],&singlepoll_basedist,nearbase_num*4+4);
+ intheight+=g_com_map[HEIGHTOFFEST_INDEX];
+ memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*6],&intheight,2);
+ tx_near_msg[MESSAGE_TYPE_IDX] = SPOLL;
+
+ tx_near_msg[NEARP_TAGFREQ_INDEX] = tag_frequency;
+ tx_near_msg[NEARP_TAGSLOTPOS_INDEX] = tagslotpos;
+
+ memcpy(&tx_near_msg[ANCHOR_ID_IDX],&singlepoll_baseid[singlepoll_i],2);
+ dwt_writetxdata(28+6*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
+ dwt_writetxfctrl(28+6*nearbase_num, 0);//设置超宽带发送数据长度
dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
+
/* We assume that the transmission is achieved correctly, poll for reception of a frame or error/timeout. See NOTE 8 below. */
while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
{
@@ -501,7 +532,7 @@
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK; //获得接收到的数据长度
dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
- if (rx_buffer[MESSAGE_TYPE_IDX] == RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
+ if (rx_buffer[MESSAGE_TYPE_IDX] == RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)&&!memcmp(&rx_buffer[ANCHOR_ID_IDX],&singlepoll_baseid[singlepoll_i],2)) //判断接收到的数据是否是response数据
{
poll_tx_ts = get_tx_timestamp_u64(); //获得POLL发送时间T1
resp_rx_ts = get_rx_timestamp_u64(); //获得RESPONSE接收时间T4
@@ -520,10 +551,22 @@
if(sync_timer>=1010)
{sync_timer=0;}
}
+ ancsync_time=((sync_timer)*1000+tmp_time);
+ last_slotnum=current_slotnum;
+ temptimer = sync_timer-10;
+ if(temptimer<0)
+ {temptimer+=1000;}
+ //current_slotnum=((float)temptimer/(SLOTTIME_MS*bigslot_num))+1;
+ if(current_slotnum==last_slotnum-1)
+ {flag_getresponse=1;}
+ lastsync_timer=sync_timer;
+ //offsettimeus=ancsync_time-current_count*LPTIMER_LSB+offset;
+ SetNextPollTime(tagslotpos);
}
memcpy(&temp_dist, &rx_buffer[DIST_IDX], 4);
memcpy(&tx_final_msg[ANCHOR_ID_IDX], &rx_buffer[ANCHOR_ID_IDX], 4);
+ singlepoll_basedist[singlepoll_i] = temp_dist;
/* Compute final message transmission time. See NOTE 9 below. */
final_tx_time = (resp_rx_ts + (RESP_RX_TO_FINAL_TX_DLY_UUS * UUS_TO_DWT_TIME)) >> 8;//计算final包发送时间，T5=T4+Treply2
dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
@@ -537,25 +580,15 @@
tag_succ_times++;
LED0_BLINK;
- ancsync_time=((sync_timer)*1000+tmp_time);
- last_slotnum=current_slotnum;
- temptimer = sync_timer-10;
- if(temptimer<0)
- {temptimer+=1000;}
- current_slotnum=((float)temptimer/(SLOTTIME_MS*bigslot_num))+1;
- if(current_slotnum==last_slotnum-1)
- {flag_getresponse=1;}
- lastsync_timer=sync_timer;
- offsettimeus=ancsync_time-current_count*LPTIMER_LSB+offset;
- SetNextPollTime(tagslotpos);
+
- if(temp_dist<mindist&&temp_dist!=0)
- {
- memcpy(&minid, &rx_buffer[ANCHOR_ID_IDX], 4);
- tag_state=GETNEARMSG;
- trygetnearmsg_times=10*tag_frequency;
- mindist=temp_dist;
- }
+// if(temp_dist<mindist&&temp_dist!=0)
+// {
+// memcpy(&minid, &rx_buffer[ANCHOR_ID_IDX], 4);
+// tag_state=GETNEARMSG;
+// trygetnearmsg_times=10*tag_frequency;
+// mindist=temp_dist;
+// }
if(result==0)
{while (!(dwt_read32bitreg(SYS_STATUS_ID) & SYS_STATUS_TXFRS))//不断查询芯片状态直到发送完成
{ };
@@ -566,15 +599,18 @@
}
else
{
+ // singlepoll_basedist[singlepoll_i] = 0x1ffff;
random_delay_tim = DFT_RAND_DLY_TIM_MS; //如果通讯失败，将间隔时间增加5ms，避开因为多标签同时发送引起的冲突。
}
}
else
{
+ // singlepoll_basedist[singlepoll_i] = 0x1ffff;
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR);
random_delay_tim = DFT_RAND_DLY_TIM_MS;
}
}
+
if(getsync_flag==0)
{
// tagslotpos--;
@@ -584,7 +620,7 @@
}
tyncpoll_time=(tagslotpos-1)*slottime;
}
- mainbase_id=minid;
+// mainbase_id=minid;
// mainbase_id = 0x4;
}
u8 nearmsg_mainbase=0,rec_tagpos_emptylist[32],mainbase_type;;
@@ -592,7 +628,7 @@
{
u32 start_poll,frame_len;
-
+//mainbase_id = 0x9724;
memcpy(&tx_near_msg[ANCHOR_ID_IDX],&mainbase_id,2);
memcpy(&tx_near_msg[TAG_ID_IDX],&dev_id,2);
tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_MSG;
@@ -633,11 +669,7 @@
// tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
}
}
-extern u8 userkey_state;
-extern float motor_keeptime;
-uint8_t changemainbase_count=0,gotosleep_flag;
-uint32_t frame_len;
-int32_t salvebase_mindist;
+
void NearPoll(void)
{
@@ -646,7 +678,7 @@
uint32_t final_tx_time;
u32 start_poll;
u8 i,j,getsync_flag=0,timeout;
- USART_putc(current_slotnum);
+ // USART_putc(current_slotnum);
dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);
tag_succ_times = 0;
@@ -662,19 +694,31 @@
tx_near_msg[BATTARY_IDX] = bat_percent;
tx_near_msg[BUTTON_IDX] = userkey_state|stationary_flag<<1|gotosleep_flag<<2;
- tx_near_msg[SEQUENCE_IDX] = frame_seq_nb++;
+ tx_near_msg[SEQUENCE_IDX] = frame_seq_nb;
+ tx_near_msg[SEQUENCEH_IDX] = (frame_seq_nb++)>>8;
tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
memcpy(&tx_near_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
+ memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*2],&nearbase_distlist,nearbase_num*4+4);
+
+ if(intheight!=0)
+ intheight+=g_com_map[HEIGHTOFFEST_INDEX];
+
+ memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*6+4],&intheight,2);
tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_POLL;
tx_near_msg[NEARP_TAGFREQ_INDEX] = tag_frequency;
tx_near_msg[NEARP_TAGSLOTPOS_INDEX] = tagslotpos;
memcpy(&tx_near_msg[ANCHOR_ID_IDX],&mainbase_id,2);
- dwt_writetxdata(21+2*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
- dwt_writetxfctrl(21+2*nearbase_num, 0);//设置超宽带发送数据长度
+ dwt_writetxdata(28+6*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
+ dwt_writetxfctrl(28+6*nearbase_num, 0);//设置超宽带发送数据长度
dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
+// for(i=0;i<nearbase_num+1;i++)
+// {
+// nearbase_distlist[i] = 0x1ffff;
+// }
+
tx_near_msg[TAGCONFIGSUCCESS_INDEX] =0;
para_update = 0;
flag_finalsend=0;
@@ -745,6 +789,8 @@
memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
mainbase_dist=temp_dist;
+ nearbase_distlist[0] = temp_dist;
+ base_mindist = temp_dist;
if((rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
motor_state=rx_buffer[MOTORSTATE_INDEX]&0xf;
rec_remotepara_state=rx_buffer[MOTORSTATE_INDEX]>>4;
@@ -782,7 +828,7 @@
exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
memcpy(&nearbase_switchdistlist[rec_nearbasepos],&rx_buffer[NR_NEARSWITCH_DISTANCE],2);
- nearbase_distlist[rec_nearbasepos]=temp_dist;
+ nearbase_distlist[rec_nearbasepos+1]=temp_dist; // nearbase_distlist[1]对应 rec_nearbaseid[0]的距离
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);
if(temp_dist<salvebase_mindist)
{
@@ -790,12 +836,13 @@
mindist_slavebaseid = rec_nearbaseid;
}
#ifdef SWITCHBASE_ZHUANDIAN
- if(temp_dist<nearbase_switchdistlist[rec_nearbasepos]&&nearbase_switchdistlist[rec_nearbasepos]!=0&&temp_dist>0)
- {
- mainbase_id = rec_nearbaseid;
- tag_state = GETNEARMSG;
- }
- #endif
+ if(temp_dist<nearbase_switchdistlist[rec_nearbasepos]&&nearbase_switchdistlist[rec_nearbasepos]!=0&&temp_dist>0)
+ {
+ mainbase_id = rec_nearbaseid;
+ tag_state = GETNEARMSG;
+ }
+ #endif
+
}
}
}else{
@@ -847,21 +894,24 @@
if(motor_keeptime==0)
motor_keeptime = rec_remotepara[3];
}else{
- memcpy((uint8_t*)&g_com_map + pack_index, &rec_remotepara[3], pack_length);
- //返回一个error状态
- //SendComMap(pack_datalen,pack_index);
- save_com_map_to_flash();
- delay_ms(100);
- NVIC_SystemReset();
+ if(pack_index<200)
+ {
+ memcpy((uint8_t*)&g_com_map + pack_index, &rec_remotepara[3], pack_length);
+ //返回一个error状态
+ //SendComMap(pack_datalen,pack_index);
+ save_com_map_to_flash();
+ delay_ms(100);
+ NVIC_SystemReset();
+ }
}
}
}
for(i=0;i<nearbase_num;i++)
{
- if(nearbaseid_list[i]!=nearbaseid_list2[i])
- {
- tag_state = GETNEARMSG;
- }
+ if(nearbaseid_list[i]!=nearbaseid_list2[i])
+ {
+ tag_state = GETNEARMSG;
+ }
}
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
//HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
@@ -891,8 +941,9 @@
memcpy(&tx_near_msg[REGP_VERSION_INDEX],&g_com_map[VERSION],2);
memcpy(&tx_near_msg[REGP_IMUTHRES_INDEX],&g_com_map[IMU_THRES],2);
memcpy(&tx_near_msg[REGP_NOMOVESLEEPTIME_INDEX],&g_com_map[NOMOVESLEEP_TIME],2);
- dwt_writetxdata(21, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
- dwt_writetxfctrl(21, 0);//设置超宽带发送数据长度
+ memcpy(&tx_near_msg[REGP_HEIGHTOFFSET_INDEX],&g_com_map[HEIGHTOFFEST_INDEX],2);
+ dwt_writetxdata(23, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
+ dwt_writetxfctrl(23, 0);//设置超宽带发送数据长度
dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
{
@@ -948,20 +999,31 @@
}
}
}
-u32 id;
+u32 id,error_times=0;
+
+extern float Height;
void Tag_App(void)//发送模式(TAG标签)
{
//LED0_ON;
SPIx_CS_GPIO->BRR = SPIx_CS;
delay_us(700);
+ GetPressAndHeight();
+ intheight = Height*100;
SPIx_CS_GPIO->BSRR = SPIx_CS;
id = dwt_readdevid() ;
while (DWT_DEVICE_ID != id)
{
// Dw1000_Init();
id = dwt_readdevid() ;
+ IdleTask();
+ if(error_times++>20)
+ {
+ printf("DW ID ERROR.\r\n");
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
}
+ error_times = 0;
switch(tag_state)
{
case REGPOLL:
@@ -987,6 +1049,10 @@
case NEARPOLL:
NearPoll();
break;
+ case SINGLEPOLL:
+ Poll();
+ break;
}
+ userkey_state = !GET_USERKEY;
dwt_entersleep();
}
--
Gitblit v1.9.3