From 3a9451238daf56e5dc2f6a8a1532c650aa9120b8 Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期六, 22 七月 2023 11:53:50 +0800
Subject: [PATCH] 初步调通，气压能正常读取，可以定位
---
Src/main.c | 172 ++++++++++++++++++++++++++-------------------------------
1 files changed, 79 insertions(+), 93 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index f3c5f37..cab5e34 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -28,10 +28,10 @@
#include "global_param.h"
#include "TrackingDiff.h"
#include "dw_app.h"
-
+#include "BMP390.h"
#define NSH1 0x0001
#define GP 0x0002
-//#define DEBUG_MODE
+#define DEBUG_MODE
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -130,61 +130,7 @@
// LED_TR_OFF;
current_time=GetLPTime();
//motor_state=2;
-if(g_com_map[MOTOR_ENABLE])
-{
-
- if(motor_keeptime>0)
- {
- motor_state = 2;
- }else{
- motor_state = 0;
- }
- //motor_state=2;
- switch(motor_state)
- {case 0:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 1:
- if(current_time<MOTOR_ONTIME)
- {
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- }else{
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- }
- break;
- case 2:
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 3:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- }
-}
+
bat_percent=Get_Battary();
if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
@@ -273,6 +219,10 @@
{
g_com_map[STATIONARY_TIME]=10;
}
+ if(g_com_map[NOMOVESLEEP_TIME]<120)
+ {
+ g_com_map[NOMOVESLEEP_TIME] = 120;
+ }
}
uint8_t uwb_active_flag = 0;
@@ -288,9 +238,9 @@
hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = (2<<8)|67;
-
-// g_com_map[DEV_ID]=0x7;
+ g_com_map[VERSION] = (2<<8)|2;
+ ErrorConfig_Handler();
+ //g_com_map[DEV_ID]=0x9444;
#ifdef DEBUG_MODE
// g_com_map[DEV_ROLE]=1;
// g_com_map[DEV_ID]=0x4009;
@@ -325,18 +275,19 @@
current_time=GetLPTime();
nomovesleep_time = g_com_map[NOMOVESLEEP_TIME];
interval = g_com_map[COM_INTERVAL];
- if(active_flag==0)
- {
- interval=1000;
- imu_enable=1;
- nomovesleep_time = 10;
- motor_enable=0;
- }
+// if(active_flag==0)
+// {
+// interval=1000;
+// imu_enable=1;
+// nomovesleep_time = 10;
+// motor_enable=0;
+// }
tag_frequency = 1000/interval;
if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
}
+ printf("固件版本:L051-嘉峪关-定位标签防撞基站 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
//g_com_map[NOMOVESLEEP_TIME]=5;
// printf("标签ID: %d .\r\n",dev_id);
// printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
@@ -363,26 +314,26 @@
void HardWareTypeDiffConfig(void)
{
- GPIO_InitTypeDef GPIO_InitStruct = {0};
- if(g_com_map[MOTORBEEPER_INDEX]!=1&&g_com_map[MOTORBEEPER_INDEX]!=2)
- {
- g_com_map[MOTORBEEPER_INDEX] = 2;
- }
- hardware_type = g_com_map[MOTORBEEPER_INDEX];
- switch(hardware_type)
- {
- case 1:
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
- GPIO_InitStruct.Pin = MOTOR_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- break;
- case 2:
- MX_TIM2_Init();
- break;
- }
+// GPIO_InitTypeDef GPIO_InitStruct = {0};
+// if(g_com_map[MOTORBEEPER_INDEX]!=1&&g_com_map[MOTORBEEPER_INDEX]!=2)
+// {
+// g_com_map[MOTORBEEPER_INDEX] = 2;
+// }
+// hardware_type = g_com_map[MOTORBEEPER_INDEX];
+// switch(hardware_type)
+// {
+// case 1:
+// HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
+// GPIO_InitStruct.Pin = MOTOR_Pin;
+// GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+// GPIO_InitStruct.Pull = GPIO_NOPULL;
+// GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+// HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+// break;
+// case 2:
+// MX_TIM2_Init();
+// break;
+// }
}
void DoubleClickProcess(void)
@@ -407,6 +358,28 @@
{
//SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+int Pressure_Para[11],Temperature_Para[3];
+extern float Altitude;
+u8 BMP390_ID;
+u8 Config;
+void BarInit(void)
+{
+ /*气压计*/
+
+ BMP390_ID = BMP390_Init();
+ Parameter_Reading(Pressure_Para,Temperature_Para);
+ //Judge the relevant state of the sensor
+ Config = BMP390_Read_Byte(ERR_REG_Addr);
+ if(Config&0x01)
+ printf("Fatal Error");
+ else
+ printf("No errors.");
+ if((Config>>1)&0x01)
+ printf("Failed.");
+ else
+ printf("Successful.");
+ /*气压计*/
+}
/* USER CODE END 0 */
/**
@@ -415,7 +388,7 @@
*/
int main(void)
{
- /* USER CODE BEGIN 1 */
+ /* USER CODE BEGIN 1 */
/* USER CODE END 1 */
@@ -442,19 +415,23 @@
MX_USART1_UART_Init();
MX_SPI1_Init();
MX_ADC_Init();
- //MX_TIM2_Init();
+
+ MX_TIM2_Init();
/* USER CODE BEGIN 2 */
LED_LG_ON;
Program_Init();
Accelerometer_Init();
- BarInit();
+ // BarInit();
Dw1000_Init();
Dw1000_App_Init();
HardWareTypeDiffConfig();
- dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- dwt_entersleep();
+// dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
+// dwt_entersleep();
// waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
+
+ BarInit();
DW_DISABLE;
+
if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
{
Error_Handler();
@@ -486,7 +463,7 @@
HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
#endif
}
- if(g_start_send_flag&&active_flag&&uwb_active_flag)
+ if(g_start_send_flag)
{ static uint16_t blink_count=0;
g_start_send_flag = 0;
// GetPressAndTemp();
@@ -921,10 +898,19 @@
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(PWR_ON_GPIO_Port, &GPIO_InitStruct);
+ /*Configure GPIO pin : PB8 */
+ GPIO_InitStruct.Pin = GPIO_PIN_8;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
/* EXTI interrupt init*/
HAL_NVIC_SetPriority(EXTI0_1_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);
+ HAL_NVIC_SetPriority(EXTI4_15_IRQn, 1, 0);
+ HAL_NVIC_EnableIRQ(EXTI4_15_IRQn);
+
}
/* USER CODE BEGIN 4 */
--
Gitblit v1.9.3