From 3c8c53f51592e0e3723083288bf80e4705973e74 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期一, 30 十月 2023 11:29:58 +0800
Subject: [PATCH] 版本v2.5，把防撞基站测距出来的距离，加到定位的报文里发到定位基站上传服务器。

---
 L051.ioc |   21 ++++++++++++++-------
 1 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/L051.ioc b/L051.ioc
index 4325508..348d269 100644
--- a/L051.ioc
+++ b/L051.ioc
@@ -23,6 +23,7 @@
 Dma.USART1_TX.1.Priority=DMA_PRIORITY_LOW
 Dma.USART1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
 File.Version=6
+GPIO.groupedBy=Group By Peripherals
 KeepUserPlacement=false
 LPTIM1.ClockPrescaler=LPTIM_PRESCALER_DIV1
 LPTIM1.IPParameters=ClockPrescaler
@@ -59,18 +60,19 @@
 Mcu.Pin24=PA15
 Mcu.Pin25=PB3
 Mcu.Pin26=PB7
-Mcu.Pin27=PB9
-Mcu.Pin28=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
-Mcu.Pin29=VP_SYS_VS_Systick
+Mcu.Pin27=PB8
+Mcu.Pin28=PB9
+Mcu.Pin29=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
 Mcu.Pin3=PH1-OSC_OUT
-Mcu.Pin30=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin30=VP_SYS_VS_Systick
+Mcu.Pin31=VP_TIM2_VS_ClockSourceINT
 Mcu.Pin4=PA0
 Mcu.Pin5=PA1
 Mcu.Pin6=PA2
 Mcu.Pin7=PA3
 Mcu.Pin8=PA4
 Mcu.Pin9=PA5
-Mcu.PinsNb=31
+Mcu.PinsNb=32
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32L051C8Tx
@@ -78,6 +80,7 @@
 MxDb.Version=DB.6.0.10
 NVIC.DMA1_Channel2_3_IRQn=true\:1\:0\:true\:false\:true\:false\:true
 NVIC.EXTI0_1_IRQn=true\:1\:0\:true\:false\:true\:true\:true
+NVIC.EXTI4_15_IRQn=true\:1\:0\:true\:false\:true\:true\:true
 NVIC.ForceEnableDMAVector=true
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.LPTIM1_IRQn=true\:1\:0\:true\:false\:true\:true\:true
@@ -178,6 +181,8 @@
 PB7.GPIO_PuPd=GPIO_PULLUP
 PB7.Locked=true
 PB7.Signal=GPIO_Input
+PB8.Locked=true
+PB8.Signal=GPXTI8
 PB9.GPIOParameters=PinState,GPIO_Label
 PB9.GPIO_Label=PWR_CTL
 PB9.Locked=true
@@ -192,7 +197,7 @@
 PH1-OSC_OUT.Mode=HSE-External-Oscillator
 PH1-OSC_OUT.Signal=RCC_OSC_OUT
 PinOutPanel.RotationAngle=0
-ProjectManager.AskForMigrate=false
+ProjectManager.AskForMigrate=true
 ProjectManager.BackupPrevious=false
 ProjectManager.CompilerOptimize=6
 ProjectManager.ComputerToolchain=false
@@ -219,7 +224,7 @@
 ProjectManager.TargetToolchain=MDK-ARM V5.27
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_LPTIM1_Init-LPTIM1-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_ADC_Init-ADC-false-HAL-true,7-MX_DMA_Init-DMA-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_LPTIM1_Init-LPTIM1-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_ADC_Init-ADC-false-HAL-true,7-MX_DMA_Init-DMA-false-HAL-true,8-MX_TIM2_Init-TIM2-false-HAL-true
 RCC.ADCFreq_Value=16000000
 RCC.AHBFreq_Value=32000000
 RCC.APB1Freq_Value=32000000
@@ -259,6 +264,8 @@
 SH.GPXTI0.ConfNb=1
 SH.GPXTI1.0=GPIO_EXTI1
 SH.GPXTI1.ConfNb=1
+SH.GPXTI8.0=GPIO_EXTI8
+SH.GPXTI8.ConfNb=1
 SH.S_TIM2_CH3.0=TIM2_CH3,PWM Generation3 CH3
 SH.S_TIM2_CH3.ConfNb=1
 SH.SharedAnalog_PA1.0=GPIO_Analog

--
Gitblit v1.9.3