From 485c52da48c18a99ff7969335ffcddfa6fdc78fa Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期五, 15 九月 2023 17:08:10 +0800
Subject: [PATCH] 1
---
Src/main.c | 303 ++++++++++++++------------------------------------
1 files changed, 87 insertions(+), 216 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 93720ec..92e97d9 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -30,10 +30,15 @@
#include "TrackingDiff.h"
#include "dw_app.h"
#include "Flash.h"
+#include "user.h"
+#include "sx126x-board.h"
+#include "string.h"
+#include "stdio.h"
+#include "delay.h"
#define NSH1 0x0001
#define GP 0x0002
#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
-//#define DEBUG_MODE
+#define DEBUG_MODE
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -61,8 +66,6 @@
SPI_HandleTypeDef hspi1;
-TIM_HandleTypeDef htim2;
-
UART_HandleTypeDef huart1;
DMA_HandleTypeDef hdma_usart1_rx;
DMA_HandleTypeDef hdma_usart1_tx;
@@ -79,7 +82,6 @@
static void MX_SPI1_Init(void);
void MX_ADC_Init(void);
static void MX_DMA_Init(void);
-static void MX_TIM2_Init(void);
static void MX_IWDG_Init(void);
/* USER CODE BEGIN PFP */
@@ -94,7 +96,7 @@
extern u8 motor_state;
uint16_t tyncpoll_time,lpsettime;
uint16_t slottime,max_slotpos;
-uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time,current_time;
+uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time;
extern uint8_t module_power;
extern float nomove_count;
uint8_t imu_enable,motor_enable;
@@ -140,7 +142,7 @@
uint8_t state5v = 1;
float motor_keeptime;
void IdleTask(void)
-{u16 current_time;
+{
//if(huart1.Instance->ISR&USART_ISR_FE)
// {
// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
@@ -213,30 +215,6 @@
__HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
}
-
-void HardWareTypeDiffConfig(void)
-{
- GPIO_InitTypeDef GPIO_InitStruct = {0};
- //hardware_type=2;
- if(hardware_type == 0)
- hardware_type = 1;
- switch(hardware_type)
- {
- case 1:
-
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
- GPIO_InitStruct.Pin = MOTOR_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- break;
- case 2:
- MX_TIM2_Init();
- //BarInit();
- break;
- }
-}
u8 active_flag,nomovesleeptime;
void Program_Init(void)
{ float temp;
@@ -248,7 +226,7 @@
hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = (1<<8)|64;
+ g_com_map[VERSION] = (1<<8)|68;
#ifdef DEBUG_MODE
// g_com_map[GROUP_ID]=21;
@@ -257,7 +235,7 @@
// g_com_map[MAX_REPORT_ANC_NUM]=1;
// g_com_map[NOMOVESLEEP_TIME]=10;
#endif
-// g_com_map[GROUP_ID]=2;
+ g_com_map[GROUP_ID]=3;
g_com_map[COM_INTERVAL] = 1000;
active_flag = g_com_map[ACTIVE_INDEX];
module_power = g_com_map[POWER];
@@ -292,7 +270,7 @@
{module_power=0;}
current_slotnum=1;
- current_time=GetLPTime();
+// current_time=GetLPTime();
if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
@@ -366,6 +344,34 @@
HAL_ADC_DeInit(&hadc);
HAL_ADCEx_DisableVREFINT();
}
+uint16_t irq_num;
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ if(GPIO_Pin == GPIO_PIN_11)
+ {
+// l_bIsVibration = HIDO_TRUE;
+// nomove_time=0;
+// printf("RXD :77777\r\n");
+ irq_num++;
+ RadioIrqProcess();
+ }
+// if(GPIO_Pin == GPIO_PIN_8)
+// {
+// Anchor_App();
+// }
+}
+void Uwb_Lora_Switch(uint8_t uwb, uint8_t lora)
+{
+if(uwb)
+HAL_GPIO_WritePin(SPI_CS_GPIO_Port, SPI_CS_Pin, GPIO_PIN_SET);
+else
+HAL_GPIO_WritePin(SPI_CS_GPIO_Port, SPI_CS_Pin, GPIO_PIN_RESET);
+
+if(lora)
+HAL_GPIO_WritePin(GPIOB, RADIO_NSS_Pin, GPIO_PIN_SET);
+else
+HAL_GPIO_WritePin(GPIOB, RADIO_NSS_Pin, GPIO_PIN_RESET);
+}
/* USER CODE END 0 */
/**
@@ -395,30 +401,37 @@
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
- MX_GPIO_Init();
- MX_LPTIM1_Init();
- MX_DMA_Init();
- MX_USART1_UART_Init();
- MX_SPI1_Init();
- MX_ADC_Init();
-
- // MX_TIM2_Init();
- MX_IWDG_Init();
- /* USER CODE BEGIN 2 */
+ MX_GPIO_Init();
+ MX_LPTIM1_Init();
+ MX_USART1_UART_Init();
+ MX_SPI1_Init();
+ MX_ADC_Init();
+ MX_DMA_Init();
+// MX_IWDG_Init();
+ /* USER CODE BEGIN 2 */
LED_LG_ON;
Program_Init();
// LIS3DH_Data_Init();
+// Uwb_Lora_Switch(1,0);
Dw1000_Init();
Dw1000_App_Init();
+ Delay_Ms(10);
+// Uwb_Lora_Switch(0,0);
// HardWareTypeDiffConfig();
- dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- dwt_entersleep();
- DW_DISABLE;
+// dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
+// dwt_entersleep();
if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
{
Error_Handler();
}
HAL_Delay(2000);
+// Uwb_Lora_Switch(0,1);
+ Lora_Init();
+ Delay_Ms(10);
+// Uwb_Lora_Switch(0,0);
+ printf("RXD :66666\r\n");
+ usart_send[0]=0x55;
+ usart_send[1]=0xaa;
// mcu_sleep();
//LED0_BLINK;
// SystemPower_Config();
@@ -432,53 +445,16 @@
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
- if(g_start_send_flag)
- { static uint16_t blink_count=0;
- SystemClock_Config();
- g_start_send_flag = 0;
- HAL_IWDG_Refresh(&hiwdg);
-// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
-// {
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
-// }else{
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
-// }
-// LED_TR_BLINK;s
-
-
- if(bat_percent>15)
- { LED_TB_ON;
- Tag_App();
- LED_TB_OFF;
- }else{
- LED_TR_ON;
- Tag_App();
- LED_TR_OFF;
- }
- //LED0_BLINK;
- IdleTask();
- if(waitusart_timer>0)
- {
- waitusart_timer--;
- }
- }else{
- IdleTask();
- }
- if(m_bEUARTTxEn==0&&waitusart_timer==0)
- {
- if(memcmp(g_com_map2,g_com_map,200)!=0)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
- }
+Lora_rx_open();
+// HAL_IWDG_Refresh(&hiwdg);
+// IdleTask();
+// Radio.IrqProcess( ); // Process Radio IRQ
+// Anchor_App();
#ifndef DEBUG_MODE
if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
#endif
- }
-// HAL_Delay(100);
- // Get_Battary();
-
- // LIS3DH_Data_Init();
+
}
/* USER CODE END 3 */
}
@@ -562,7 +538,7 @@
hadc.Init.OversamplingMode = DISABLE;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
- hadc.Init.SamplingTime = ADC_SAMPLETIME_160CYCLES_5;
+ hadc.Init.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.ContinuousConvMode = DISABLE;
@@ -581,7 +557,7 @@
}
/** Configure for the selected ADC regular channel to be converted.
*/
- sConfig.Channel = ADC_CHANNEL_1;
+ sConfig.Channel = ADC_CHANNEL_VREFINT;
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
{
@@ -697,69 +673,6 @@
}
/**
- * @brief TIM2 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_TIM2_Init(void)
-{
-
- /* USER CODE BEGIN TIM2_Init 0 */
-
- /* USER CODE END TIM2_Init 0 */
-
- TIM_ClockConfigTypeDef sClockSourceConfig = {0};
- TIM_MasterConfigTypeDef sMasterConfig = {0};
- TIM_OC_InitTypeDef sConfigOC = {0};
-
- /* USER CODE BEGIN TIM2_Init 1 */
-
- /* USER CODE END TIM2_Init 1 */
- htim2.Instance = TIM2;
- htim2.Init.Prescaler = 9;
- htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
- htim2.Init.Period = 1171;
- htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
- htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
- if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
- {
- Error_Handler();
- }
- if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
- sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
- if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
- {
- Error_Handler();
- }
- sConfigOC.OCMode = TIM_OCMODE_PWM1;
- sConfigOC.Pulse = 599;
- sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
- if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN TIM2_Init 2 */
-//if(HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3) != HAL_OK)
-// {
-// /* Starting Error */
-// Error_Handler();
-// }
- /* USER CODE END TIM2_Init 2 */
- HAL_TIM_MspPostInit(&htim2);
-
-}
-
-/**
* @brief USART1 Initialization Function
* @param None
* @retval None
@@ -844,13 +757,14 @@
HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|RADIO_nRESET_Pin
+ |RADIO_NSS_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin, GPIO_PIN_RESET);
- /*Configure GPIO pin : PA0 */
- GPIO_InitStruct.Pin = GPIO_PIN_0;
+ /*Configure GPIO pins : PA0 RADIO_DIO1_Pin */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|RADIO_DIO1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -888,8 +802,10 @@
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
- /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin LED2_R_Pin PWR_CTL_Pin */
- GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|PWR_CTL_Pin;
+ /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin LED2_R_Pin RADIO_nRESET_Pin
+ RADIO_NSS_Pin PWR_CTL_Pin */
+ GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|RADIO_nRESET_Pin
+ |RADIO_NSS_Pin|PWR_CTL_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
@@ -902,6 +818,12 @@
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+ /*Configure GPIO pin : RADIO_BUSY_Pin */
+ GPIO_InitStruct.Pin = RADIO_BUSY_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_BUSY_GPIO_Port, &GPIO_InitStruct);
+
/*Configure GPIO pin : PWR_ON_Pin */
GPIO_InitStruct.Pin = PWR_ON_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@@ -911,6 +833,9 @@
/* EXTI interrupt init*/
HAL_NVIC_SetPriority(EXTI0_1_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);
+
+ HAL_NVIC_SetPriority(EXTI4_15_IRQn, 1, 0);
+ HAL_NVIC_EnableIRQ(EXTI4_15_IRQn);
}
@@ -942,65 +867,11 @@
extern uint8_t tx_near_msg[80],stationary_flag;
float key_keeptime;
extern float freqlost_count,range_lost_time;
+uint32_t lp_time;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
- static uint8_t i=0,lost_jumpcount=0;
- i++;
-
- current_slotnum++;
- freqlost_count+=1/(float)tag_frequency;
- range_lost_time +=1/(float)tag_frequency;
+ lp_time++;
- if(freqlost_count>FREQ_LOST_TIME)
- {
- tag_frequency = NOTAG_FREQ;
- if(lost_jumpcount++>=4) //无测距情况下，每5秒发一次；
- {
- lost_jumpcount = 0;
- g_start_send_flag=1;
- }
- }else{
- g_start_send_flag=1;
- }
- if(range_lost_time<1||freqlost_count>FREQ_LOST_TIME)
- {
- SetNextPollTime(0);
- }else{
- SetNextPollTime(5);
- }
- nomove_count+=1/(float)tag_frequency;
- if(motor_keeptime>0)
- {
- nomove_count+=1/(float)tag_frequency;
- }
- if(!GET_USERKEY)
- {
- key_keeptime+=1/(float)tag_frequency;
- if(key_keeptime>=KEY_KEEPRESET_TIME)
- {
- g_com_map[ACTIVE_INDEX]=!active_flag;
- save_com_map_to_flash();
- MOTOR_ON;
- HAL_Delay(2000);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
- }
- }else{
- key_keeptime=0;
- }
-// if(nomove_count>STATIONARY_TIME)
-// {
-// stationary_flag = 1;
-// }else{
-// stationary_flag = 0;
-// }
-//if(nomove_count>=nomovesleeptime-1&&imu_enable)
-// {
-// tx_near_msg[TAGSTATE] = tx_near_msg[TAGSTATE]|GOINGSLEEPBIT;
-// }
-// if(nomove_count>nomovesleeptime&&imu_enable)
-// {
-// mcu_sleep();
-// }
}
/* USER CODE END 4 */
--
Gitblit v1.9.3