From 5c6608fc16627430bcdbaf4917c608e61b7db77c Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期一, 24 四月 2023 10:26:57 +0800
Subject: [PATCH] 初步测试完成
---
Src/main.c | 411 ++++++++++++++++++++++++++++++++++++++++++++++------------
1 files changed, 323 insertions(+), 88 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 389f70f..191cbc1 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -29,6 +29,10 @@
#include "global_param.h"
#include "TrackingDiff.h"
#include "dw_app.h"
+#include "Flash.h"
+#define NSH1 0x0001
+#define GP 0x0002
+#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
//#define DEBUG_MODE
/* USER CODE END Includes */
@@ -40,8 +44,7 @@
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
//#define DEBUG_MODE
-#define Period (uint32_t) 32768 - 1
-#define Timeout (uint32_t) 32768 - 1//(32768 - 1)
+
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
@@ -55,6 +58,8 @@
LPTIM_HandleTypeDef hlptim1;
SPI_HandleTypeDef hspi1;
+
+TIM_HandleTypeDef htim2;
UART_HandleTypeDef huart1;
DMA_HandleTypeDef hdma_usart1_rx;
@@ -72,6 +77,7 @@
static void MX_SPI1_Init(void);
static void MX_ADC_Init(void);
static void MX_DMA_Init(void);
+static void MX_TIM2_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@@ -104,7 +110,9 @@
Error_Handler();
}
}
+uint16_t hardware_version,hardware_pici,hardware_type;
uint8_t state5v;
+float motor_keeptime;
void IdleTask(void)
{u16 current_time;
@@ -123,34 +131,64 @@
// LED_TR_OFF;
current_time=GetLPTime();
//motor_state=2;
- if(g_com_map[MOTOR_ONTIME]>0)
- {
- g_com_map[MOTOR_ONTIME]--;
- motor_state = 1;
- }
+// if(g_com_map[MOTOR_ONTIME]>0)
+// {
+// g_com_map[MOTOR_ONTIME]--;
+// motor_state = 1;
+// }
+if(g_com_map[MOTOR_ENABLE])
+{
+
+
switch(motor_state)
{case 0:
- MOTOR_OFF;
+ if(hardware_type==NSH1)
+ {MOTOR_OFF;
+ }else if(hardware_type==GP)
+ {
+ HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+ }
break;
case 1:
if(current_time<MOTOR_ONTIME)
{
- MOTOR_ON;
+ if(hardware_type==NSH1)
+ {MOTOR_ON;
+ }else if(hardware_type==GP)
+ {
+ HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
+ }
}else{
- MOTOR_OFF;
- }
-
+ if(hardware_type==NSH1)
+ {MOTOR_OFF;
+ }else if(hardware_type==GP)
+ {
+ HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+ }
+ }
break;
case 2:
- MOTOR_ON;
+ if(hardware_type==NSH1)
+ {MOTOR_ON;
+ }else if(hardware_type==GP)
+ {
+ HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
+ }
break;
case 3:
- MOTOR_OFF;
+ if(hardware_type==NSH1)
+ {MOTOR_OFF;
+ }else if(hardware_type==GP)
+ {
+ HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+ }
break;
}
+}
if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
- nomove_count = 0;
+ //nomove_count = 0;
+ bat_percent=Get_Battary();
if(state5v==0)
{
state5v=1;
@@ -159,9 +197,9 @@
if(bat_percent>99)
{
LED_LR_OFF;
- LED_LG_ON;
+ //LED_LG_ON;
}else{
- LED_LR_ON;
+ // LED_LR_ON;
LED_LG_OFF;
}
}else{
@@ -212,19 +250,20 @@
u16 total_slotnum,current_slotnum;
extern int32_t offsettimeus;
-
+ int32_t lpcount,lptime,target_time;
void SetNextPollTime(u16 time)
{
- int32_t lpcount,lptime,target_time;
- if(current_slotnum>=total_slotnum)
- current_slotnum-=total_slotnum;
-
- target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
- //if(target_time<90000)
- {
- lptime=target_time-offsettimeus;
- lpcount = lptime/LPTIMER_LSB;
+
+// if(current_slotnum>=total_slotnum)
+// current_slotnum-=total_slotnum;
+//
+// target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
+// //if(target_time<90000)
+// {
+// lptime=target_time-offsettimeus;
+// lpcount = lptime/LPTIMER_LSB;
+ lpcount+=g_com_map[COM_INTERVAL]*LPTIMER_LSB;
if(lpcount>LPTIMER_1S_COUNT)
lpcount-=LPTIMER_1S_COUNT;
if(lpcount<0)
@@ -233,35 +272,49 @@
}
__HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
}
+
+void HardWareTypeDiffConfig(void)
+{
+GPIO_InitTypeDef GPIO_InitStruct = {0};
+//hardware_type=2;
+if(hardware_type == 0)
+ hardware_type = 1;
+ switch(hardware_type)
+ {
+ case 1:
+
+ HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
+ GPIO_InitStruct.Pin = MOTOR_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+ break;
+ case 2:
+ MX_TIM2_Init();
+ //BarInit();
+ break;
+ }
}
+int16_t g_commap_antdelay;
+u8 active_flag,nomovesleeptime;
void Program_Init(void)
{ float temp;
uint16_t temp2;
uint16_t i;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
+ hardware_version = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP);
+ hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
+ hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x0110;
-#ifdef DEBUG_MODE
-// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=1;
- g_com_map[COM_INTERVAL]=100;
-// g_com_map[MAX_REPORT_ANC_NUM]=1;
- g_com_map[NOMOVESLEEP_TIME]=10;
-#endif
-
- if(g_com_map[COM_INTERVAL]==0)
- {
- g_com_map[COM_INTERVAL]=100;
- }
- if(module_power>67)
- {module_power=67;}
- if(module_power<0)
- {module_power=0;}
- module_power = g_com_map[POWER];
+ g_com_map[VERSION] = (1<<8)|33;
+ active_flag = g_com_map[ACTIVE_INDEX];
+ module_power = g_com_map[POWER];
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
+ g_com_map[GROUP_ID] = 98;
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
@@ -269,8 +322,36 @@
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
lastpoll_time=tyncpoll_time;
- tag_frequency = 1000/g_com_map[COM_INTERVAL];
+ tag_frequency = 1000/g_com_map[COM_INTERVAL];
total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ nomovesleeptime = g_com_map[NOMOVESLEEP_TIME];
+ if(active_flag==0)
+ {
+ imu_enable=1;
+ nomovesleeptime =10;
+ }
+#ifdef DEBUG_MODE
+// g_com_map[DEV_ROLE]=1;
+// g_com_map[DEV_ID]=1;
+ g_com_map[COM_INTERVAL]=100;
+// g_com_map[MAX_REPORT_ANC_NUM]=1;
+ g_com_map[NOMOVESLEEP_TIME]=10;
+#endif
+
+ g_com_map[COM_INTERVAL]=100;
+ if(g_com_map[COM_INTERVAL]==0)
+ {
+ g_com_map[COM_INTERVAL]=100;
+ }
+ if(module_power>67)
+ {module_power=67;}
+ if(module_power<0)
+ {module_power=0;}
+ if(g_com_map[ANT_LENGTH]>10000)
+ {
+ g_com_map[ANT_LENGTH] = 0;
+ }
+ g_commap_antdelay = -g_com_map[DIST_OFFSET];
current_slotnum=1;
current_time=GetLPTime();
if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
@@ -278,9 +359,32 @@
Error_Handler();
}
//g_com_map[NOMOVESLEEP_TIME]=5;
- printf("标签ID: %d .\r\n",dev_id);
- printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
- printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t0.bco=63488");
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t0.txt=\"等待串口通讯\"");
+
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t1.bco=63488");
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t1.txt=\"等待测距\"");
+
+// USART_putc(0xff);
+// USART_putc(0xff);
+// USART_putc(0xff);
+// printf("t2.bco=2024");
+// USART_putc(0xff);
+// USART_putc(0xff);
+// USART_putc(0xff);
+// printf("t2.txt=\"无测距\"");
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
@@ -311,6 +415,7 @@
{
//SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+u8 flag_entersleep1=0,flag_entersleep2=0;
/* USER CODE END 0 */
/**
@@ -322,7 +427,6 @@
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
-
/* MCU Configuration--------------------------------------------------------*/
@@ -343,19 +447,21 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_LPTIM1_Init();
- MX_DMA_Init();
+ MX_DMA_Init();
MX_USART1_UART_Init();
MX_SPI1_Init();
MX_ADC_Init();
+
+// MX_TIM2_Init();
/* USER CODE BEGIN 2 */
LED_LG_ON;
Program_Init();
- LIS3DH_Data_Init();
+ Accelerometer_Init();
Dw1000_Init();
Dw1000_App_Init();
-
+ HardWareTypeDiffConfig();
dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- //dwt_entersleep();
+ dwt_entersleep();
waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
DW_DISABLE;
if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
@@ -387,7 +493,7 @@
// }else{
// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
// }
-// LED_TR_BLINK;
+// LED_TR_BLINK;s
bat_percent=Get_Battary();
if(bat_percent>15)
@@ -405,9 +511,10 @@
{
waitusart_timer--;
}
- if(m_bEUARTTxEn==0&&waitusart_timer==0)
+ if(m_bEUARTTxEn==0&&waitusart_timer==0&&(motor_state==0||motor_state==3))
{
-#ifndef DEBUG_MODE
+#ifndef DEBUG_MODE
+if(flag_entersleep1*flag_entersleep2==1)
HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
#endif
}
@@ -435,14 +542,14 @@
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
- /** Configure the main internal regulator output voltage
+ /** Configure the main internal regulator output voltage
*/
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
- /** Configure LSE Drive Capability
+ /** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
- /** Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
@@ -456,7 +563,7 @@
{
Error_Handler();
}
- /** Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@@ -496,7 +603,7 @@
/* USER CODE BEGIN ADC_Init 1 */
/* USER CODE END ADC_Init 1 */
- /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
+ /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
*/
hadc.Instance = ADC1;
hadc.Init.OversamplingMode = DISABLE;
@@ -519,7 +626,7 @@
{
Error_Handler();
}
- /** Configure for the selected ADC regular channel to be converted.
+ /** Configure for the selected ADC regular channel to be converted.
*/
sConfig.Channel = ADC_CHANNEL_1;
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
@@ -607,6 +714,69 @@
}
/**
+ * @brief TIM2 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_TIM2_Init(void)
+{
+
+ /* USER CODE BEGIN TIM2_Init 0 */
+
+ /* USER CODE END TIM2_Init 0 */
+
+ TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+ TIM_MasterConfigTypeDef sMasterConfig = {0};
+ TIM_OC_InitTypeDef sConfigOC = {0};
+
+ /* USER CODE BEGIN TIM2_Init 1 */
+
+ /* USER CODE END TIM2_Init 1 */
+ htim2.Instance = TIM2;
+ htim2.Init.Prescaler = 9;
+ htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim2.Init.Period = 1171;
+ htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+ if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+ sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+ if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sConfigOC.OCMode = TIM_OCMODE_PWM1;
+ sConfigOC.Pulse = 599;
+ sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+ if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM2_Init 2 */
+//if(HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3) != HAL_OK)
+// {
+// /* Starting Error */
+// Error_Handler();
+// }
+ /* USER CODE END TIM2_Init 2 */
+ HAL_TIM_MspPostInit(&htim2);
+
+}
+
+/**
* @brief USART1 Initialization Function
* @param None
* @retval None
@@ -653,10 +823,10 @@
}
-/**
+/**
* Enable DMA controller clock
*/
-static void MX_DMA_Init(void)
+static void MX_DMA_Init(void)
{
/* DMA controller clock enable */
@@ -688,7 +858,7 @@
HAL_GPIO_WritePin(GPIOA, SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|MOTOR_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
@@ -701,12 +871,6 @@
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /*Configure GPIO pin : BAT_MEAS_Pin */
- GPIO_InitStruct.Pin = BAT_MEAS_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(BAT_MEAS_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : SCL_Pin SDA_Pin */
GPIO_InitStruct.Pin = SCL_Pin|SDA_Pin;
@@ -735,20 +899,18 @@
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(USER_KEY_GPIO_Port, &GPIO_InitStruct);
- /*Configure GPIO pins : MOTOR_Pin LED1_G_Pin LED1_R_Pin LED2_R_Pin
- PWR_CTL_Pin */
- GPIO_InitStruct.Pin = MOTOR_Pin|LED1_G_Pin|LED1_R_Pin|LED2_R_Pin
- |PWR_CTL_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
/*Configure GPIO pin : INPUT_5V_Pin */
GPIO_InitStruct.Pin = INPUT_5V_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin LED2_R_Pin PWR_CTL_Pin */
+ GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|PWR_CTL_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pins : DW_WKUP_Pin DW_CTRL_Pin LED2_G_Pin */
GPIO_InitStruct.Pin = DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin;
@@ -794,8 +956,67 @@
/*Enter the Standby mode*/
HAL_PWR_EnterSTANDBYMode();
}
+extern u8 flag_usartrecok,flag_uwbrange_ok;
+extern int32_t uwb_dist;
+void LCDPROCESS(void)
+{
+ if(flag_usartrecok)
+ {
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t0.bco=2024");
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t0.txt=\"串口通讯成功\"");
+ flag_entersleep1 = 1;
+
+ }else{
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t0.bco=63488");
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t0.txt=\"等待串口通讯\"");
+ }
+ if(flag_uwbrange_ok)
+ {
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t1.bco=2024");
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t1.txt=\"测距成功\"");
+
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t2.bco=2024");
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t2.txt=\"距离:%d\"",uwb_dist);
+ flag_entersleep2 = 1;
+ }else{
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t1.bco=63488");
+ USART_putc(0xff);
+ USART_putc(0xff);
+ USART_putc(0xff);
+ printf("t1.txt=\"等待测距\"");
+ }
+
+}
+float lcd_count=0;
extern uint8_t tx_near_msg[80],stationary_flag;
-float key_keeptime;
+float key_keeptime,lcdtimer;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
static uint8_t i=0;
@@ -804,11 +1025,25 @@
current_slotnum++;
SetNextPollTime(tyncpoll_time);
nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
+ lcdtimer+=(float)g_com_map[COM_INTERVAL]/1000;
+ if(lcdtimer-lcd_count>0.5)
+ {
+ lcd_count = lcdtimer;
+ LCDPROCESS();
+ }
+ if(motor_keeptime>0)
+ {
+ motor_keeptime-=(float)g_com_map[COM_INTERVAL]/1000;
+ }
if(!GET_USERKEY)
{
key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
if(key_keeptime>=KEY_KEEPRESET_TIME)
{
+ g_com_map[ACTIVE_INDEX]=!active_flag;
+ save_com_map_to_flash();
+ MOTOR_ON;
+ HAL_Delay(2000);
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
}
}else{
@@ -820,14 +1055,14 @@
}else{
stationary_flag = 0;
}
-if(nomove_count>=g_com_map[NOMOVESLEEP_TIME]-1&&imu_enable)
+if(nomove_count>=nomovesleeptime-1&&imu_enable)
{
tx_near_msg[TAGSTATE] = tx_near_msg[TAGSTATE]|GOINGSLEEPBIT;
}
- if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&imu_enable)
- {
- mcu_sleep();
- }
+// if(nomove_count>nomovesleeptime&&imu_enable)
+// {
+// mcu_sleep();
+// }
}
/* USER CODE END 4 */
@@ -852,7 +1087,7 @@
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
-{
+{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
--
Gitblit v1.9.3