From 5f1696dcd80b5838eea5cf2a425d537fdfdd4b0f Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期一, 20 三月 2023 10:44:37 +0800
Subject: [PATCH] 免布线基站v1.52-6.5g。
---
Src/main.c | 511 +++++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 356 insertions(+), 155 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 2f8c0ba..b151144 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -28,6 +28,12 @@
#include "deca_device_api.h"
#include "global_param.h"
#include "TrackingDiff.h"
+#include "dw_app.h"
+#include "Flash.h"
+#define NSH1 0x0001
+#define GP 0x0002
+#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
+//#define DEBUG_MODE
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -37,9 +43,8 @@
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
-#define DEBUG_MODE
-#define Period (uint32_t) 32768 - 1
-#define Timeout (uint32_t) 32768 - 1//(32768 - 1)
+//#define DEBUG_MODE
+
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
@@ -53,6 +58,8 @@
LPTIM_HandleTypeDef hlptim1;
SPI_HandleTypeDef hspi1;
+
+TIM_HandleTypeDef htim2;
UART_HandleTypeDef huart1;
DMA_HandleTypeDef hdma_usart1_rx;
@@ -68,8 +75,9 @@
static void MX_LPTIM1_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_SPI1_Init(void);
-static void MX_ADC_Init(void);
+void MX_ADC_Init(void);
static void MX_DMA_Init(void);
+static void MX_TIM2_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@@ -79,140 +87,189 @@
uint32_t dev_id;
uint16_t heartbeat_timer,poll_timer,sync_timer;
uint8_t aRxBuffer[1],group_id;
-
-void IdleTask(void)
-{
-
- UART_CheckReceive();
- UART_CheckSend();
-
- if(huart1.Instance->ISR&USART_ISR_ORE)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
-if(!HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
-{
- LED_TR_ON;
- LED_TB_OFF;
-}else{
- LED_TR_OFF;
- if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- {
- LED_TB_ON;
- }
-}
- if(g_com_map[CNT_UPDATE]==1)
- {
- uint32_t result = 0;
- uint16_t tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 128);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- g_com_map[CNT_UPDATE]=0;
- save_com_map_to_flash();
- delay_ms(100);
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_REBOOT]==1)
- {
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_RESTART]==1)
- {
- g_com_map[CNT_RESTART]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
-
- }
-
+uint8_t bat_percent=0,g_start_send_flag;
+extern u8 motor_state;
uint16_t tyncpoll_time,lpsettime;
uint16_t slottime,max_slotpos;
uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time,current_time;
extern uint8_t module_power;
+extern float nomove_count;
uint8_t imu_enable,motor_enable;
u16 GetLPTime(void)
{
u16 count=HAL_LPTIM_ReadCounter(&hlptim1);
return count*LPTIMER_LSB/1000;
}
+void UsartInit(void)
+{
+ waitusart_timer = tag_frequency*USART_KEEPWAKE_TIME;
+ MX_DMA_Init();
+ MX_USART1_UART_Init();
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+}
+uint16_t hardware_version,hardware_pici,hardware_type;
+uint8_t state5v;
+float motor_keeptime;
+void IdleTask(void)
+{u16 current_time;
+//if(huart1.Instance->ISR&USART_ISR_FE)
+// {
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+// }
+ if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ {
+
+ UART_CheckReceive();
+ UART_CheckSend();
+ nomove_count = 0;
+ // bat_percent=Get_Battary();
+ if(state5v==0)
+ {
+ state5v=1;
+ UsartInit();
+ }
+ if(bat_percent>99)
+ {
+ LED_LR_OFF;
+ LED_LG_ON;
+ }else{
+ LED_LR_ON;
+ LED_LG_OFF;
+ }
+ }else{
+ state5v=0;
+ LED_LR_OFF;
+ LED_LG_OFF;
+// }
+}
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
+
+ }
+
+
u16 total_slotnum,current_slotnum;
extern int32_t offsettimeus;
-
+u16 last_lpcount = 0;
void SetNextPollTime(u16 time)
{
int32_t lpcount,lptime,target_time;
-
- time=0;
- if(current_slotnum>=total_slotnum)
- current_slotnum-=total_slotnum;
-
- target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
- //if(target_time<90000)
- {
- lptime=target_time-offsettimeus;
- lpcount = lptime/LPTIMER_LSB;
- if(lpcount>LPTIMER_1S_COUNT)
- lpcount-=LPTIMER_1S_COUNT;
- if(lpcount<0)
- {
- lpcount+=LPTIMER_1S_COUNT;
- }
+
+// if(current_slotnum>=total_slotnum)
+// current_slotnum-=total_slotnum;
+//
+// target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
+// //if(target_time<90000)
+// {
+// lptime=target_time-offsettimeus;
+// lpcount = lptime/LPTIMER_LSB;
+// if(lpcount>LPTIMER_1S_COUNT)
+// lpcount-=LPTIMER_1S_COUNT;
+// if(lpcount<0)
+// {
+// lpcount+=LPTIMER_1S_COUNT;
+// }
+ lpcount = last_lpcount+32768/tag_frequency;
+ while(lpcount>LPTIMER_1S_COUNT)
+ {
+ lpcount-=LPTIMER_1S_COUNT;
+ }
+ last_lpcount = lpcount;
__HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
+
}
+
+void HardWareTypeDiffConfig(void)
+{
+GPIO_InitTypeDef GPIO_InitStruct = {0};
+//hardware_type=2;
+if(hardware_type == 0)
+ hardware_type = 1;
+ switch(hardware_type)
+ {
+ case 1:
+
+ HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
+ GPIO_InitStruct.Pin = MOTOR_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+ break;
+ case 2:
+ MX_TIM2_Init();
+ //BarInit();
+ break;
+ }
}
+u8 active_flag,nomovesleeptime;
void Program_Init(void)
{ float temp;
uint16_t temp2;
uint16_t i;
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
+ hardware_version = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP);
+ hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
+ hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x0109;
-#ifdef DEBUG_MODE
-// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=1;
- g_com_map[COM_INTERVAL]=100;
-// g_com_map[MAX_REPORT_ANC_NUM]=1;
- g_com_map[NOMOVESLEEP_TIME]=10;
-#endif
-
-
- module_power = g_com_map[POWER];
+ g_com_map[VERSION] = (1<<8)|52;
+
+ #ifdef DEBUG_MODE
+// g_com_map[GROUP_ID]=21;
+// g_com_map[DEV_ID]=4;
+ // g_com_map[COM_INTERVAL]=100;
+ // g_com_map[MAX_REPORT_ANC_NUM]=1;
+ // g_com_map[NOMOVESLEEP_TIME]=10;
+ #endif
+
+ active_flag = g_com_map[ACTIVE_INDEX];
+ module_power = g_com_map[POWER];
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
- slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]/4)+4;
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
lastpoll_time=tyncpoll_time;
- tag_frequency = 1000/g_com_map[COM_INTERVAL];
+ tag_frequency = 1000/g_com_map[COM_INTERVAL];
total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ nomovesleeptime = g_com_map[NOMOVESLEEP_TIME];
+ if(active_flag==0)
+ {
+ imu_enable=1;
+ nomovesleeptime =10;
+ }
+
+ // g_com_map[COM_INTERVAL]=100;
+ if(g_com_map[COM_INTERVAL]==0)
+ {
+ g_com_map[COM_INTERVAL]=100;
+ }
+ if(module_power>67)
+ {module_power=67;}
+ if(module_power<0)
+ {module_power=0;}
+
current_slotnum=1;
current_time=GetLPTime();
if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
}
-
+//g_com_map[NOMOVESLEEP_TIME]=5;
printf("标签ID: %d .\r\n",dev_id);
printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
-
-
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -230,7 +287,6 @@
uint32_t temp;
extern uint8_t sleep_flag,m_bEUARTTxEn;
uint16_t waitusart_timer;
-uint8_t bat_percent=0,g_start_send_flag;
//void HAL_UART_RxCpltCallback(UART_HandleTypeDef *UartHandle)
//{
// /* Set transmission flag: trasfer complete*/
@@ -248,12 +304,44 @@
* @brief The application entry point.
* @retval int
*/
+uint16_t temp2;
+float dw_vbat,last_vbat;
+uint8_t Get_Battary_UWB(void)
+{
+ static uint8_t first = 1;
+ static float last_value = 100;
+ static uint16_t bat_count = 0;
+ //if(bat_count++%600==0)
+ {
+ temp2=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp2&0xff)-173)/173+3.3;
+ if(fabs(dw_vbat-dw_vbat)>0.2)
+ {
+ last_vbat = dw_vbat;
+ return last_value;
+ }
+ last_vbat = dw_vbat;
+ if(dw_vbat>=3.0)
+ {
+ if(first)
+ {
+ first = 0;
+ last_value =(dw_vbat-3.0)*167;//(bat_volt-3.5)/0.6*100
+ }
+ last_value = 0.9*last_value + (dw_vbat-3.0)*16.7;
+ if(last_value>100)
+ last_value = 100;
+ if(last_value<0)
+ last_value = 0;
+ }
+ }
+ return last_value;
+}
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
-
/* MCU Configuration--------------------------------------------------------*/
@@ -261,7 +349,7 @@
HAL_Init();
/* USER CODE BEGIN Init */
-
+//每次生成CUBE后需要注意，串口初始化要在DMA初始化后面，手动调整顺序**************
/* USER CODE END Init */
/* Configure the system clock */
@@ -274,21 +362,27 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_LPTIM1_Init();
- // MX_USART1_UART_Init();
+ MX_DMA_Init();
+ MX_USART1_UART_Init();
MX_SPI1_Init();
- MX_ADC_Init();
- MX_DMA_Init();
+ // MX_ADC_Init();
+
+// MX_TIM2_Init();
/* USER CODE BEGIN 2 */
+ LED_LG_ON;
Program_Init();
- LIS3DH_Data_Init();
+// LIS3DH_Data_Init();
Dw1000_Init();
Dw1000_App_Init();
-
+// HardWareTypeDiffConfig();
dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
dwt_entersleep();
- waitusart_timer=1;
DW_DISABLE;
-// HAL_Delay(2000);
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+ HAL_Delay(2000);
// mcu_sleep();
//LED0_BLINK;
// SystemPower_Config();
@@ -313,17 +407,17 @@
// }else{
// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
// }
- LED_TR_BLINK;
+// LED_TR_BLINK;s
- bat_percent=Get_Battary();
+
if(bat_percent>15)
- {// LED0_ON;
+ { LED_TB_ON;
Tag_App();
- // LED0_OFF;
+ LED_TB_OFF;
}else{
- //LED_LR_ON;
+ LED_TR_ON;
Tag_App();
- // LED_LR_OFF;
+ LED_TR_OFF;
}
//LED0_BLINK;
IdleTask();
@@ -332,8 +426,15 @@
waitusart_timer--;
}
if(m_bEUARTTxEn==0&&waitusart_timer==0)
- {
- // HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ {
+ if(memcmp(g_com_map2,g_com_map,200)!=0)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
+ }
+#ifndef DEBUG_MODE
+if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+#endif
}
@@ -359,14 +460,14 @@
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
- /** Configure the main internal regulator output voltage
+ /** Configure the main internal regulator output voltage
*/
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
- /** Configure LSE Drive Capability
+ /** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
- /** Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
@@ -380,7 +481,7 @@
{
Error_Handler();
}
- /** Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@@ -408,7 +509,12 @@
* @param None
* @retval None
*/
-static void MX_ADC_Init(void)
+void MX_ADC_DeInit(void)
+{
+ HAL_ADC_DeInit(&hadc);
+ HAL_ADCEx_DisableVREFINT();
+}
+void MX_ADC_Init(void)
{
/* USER CODE BEGIN ADC_Init 0 */
@@ -420,7 +526,7 @@
/* USER CODE BEGIN ADC_Init 1 */
/* USER CODE END ADC_Init 1 */
- /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
+ /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
*/
hadc.Instance = ADC1;
hadc.Init.OversamplingMode = DISABLE;
@@ -443,16 +549,17 @@
{
Error_Handler();
}
- /** Configure for the selected ADC regular channel to be converted.
+ /** Configure for the selected ADC regular channel to be converted.
*/
- sConfig.Channel = ADC_CHANNEL_1;
+ sConfig.Channel = ADC_CHANNEL_VREFINT;
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC_Init 2 */
-HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
+ HAL_ADCEx_EnableVREFINT();
+ HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
/* USER CODE END ADC_Init 2 */
}
@@ -531,6 +638,69 @@
}
/**
+ * @brief TIM2 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_TIM2_Init(void)
+{
+
+ /* USER CODE BEGIN TIM2_Init 0 */
+
+ /* USER CODE END TIM2_Init 0 */
+
+ TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+ TIM_MasterConfigTypeDef sMasterConfig = {0};
+ TIM_OC_InitTypeDef sConfigOC = {0};
+
+ /* USER CODE BEGIN TIM2_Init 1 */
+
+ /* USER CODE END TIM2_Init 1 */
+ htim2.Instance = TIM2;
+ htim2.Init.Prescaler = 9;
+ htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim2.Init.Period = 1171;
+ htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+ if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+ sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+ if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sConfigOC.OCMode = TIM_OCMODE_PWM1;
+ sConfigOC.Pulse = 599;
+ sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+ if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM2_Init 2 */
+//if(HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3) != HAL_OK)
+// {
+// /* Starting Error */
+// Error_Handler();
+// }
+ /* USER CODE END TIM2_Init 2 */
+ HAL_TIM_MspPostInit(&htim2);
+
+}
+
+/**
* @brief USART1 Initialization Function
* @param None
* @retval None
@@ -539,7 +709,7 @@
{
/* USER CODE BEGIN USART1_Init 0 */
-
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
/* USER CODE END USART1_Init 0 */
/* USER CODE BEGIN USART1_Init 1 */
@@ -554,30 +724,33 @@
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
- huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT|UART_ADVFEATURE_DMADISABLEONERROR_INIT;
+ huart1.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
+ huart1.AdvancedInit.DMADisableonRxError = UART_ADVFEATURE_DMA_DISABLEONRXERROR;
if (HAL_UART_Init(&huart1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USART1_Init 2 */
-
+ GPIO_InitStruct.Pin = GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF4_USART1;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
// if(HAL_UART_Receive_IT(&huart1, (uint8_t *)aRxBuffer, 1) != HAL_OK)
// {
// Error_Handler();
// }
- if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
- {
- Error_Handler();
- }
Usart1InitVariables();
/* USER CODE END USART1_Init 2 */
}
-/**
+/**
* Enable DMA controller clock
*/
-static void MX_DMA_Init(void)
+static void MX_DMA_Init(void)
{
/* DMA controller clock enable */
@@ -606,28 +779,22 @@
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, DW_CTRL_Pin|SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOA, SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|LED2_G_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin : PA0 */
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /*Configure GPIO pin : BAT_MEAS_Pin */
- GPIO_InitStruct.Pin = BAT_MEAS_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(BAT_MEAS_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : SCL_Pin SDA_Pin */
GPIO_InitStruct.Pin = SCL_Pin|SDA_Pin;
@@ -637,7 +804,7 @@
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pin : SPI_CS_Pin */
- GPIO_InitStruct.Pin = SPI_CS_Pin|GPIO_PIN_9;
+ GPIO_InitStruct.Pin = SPI_CS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@@ -656,18 +823,18 @@
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(USER_KEY_GPIO_Port, &GPIO_InitStruct);
- /*Configure GPIO pins : MOTOR_Pin LED1_G_Pin LED1_R_Pin LED2_R_Pin */
- GPIO_InitStruct.Pin = MOTOR_Pin|LED1_G_Pin|LED1_R_Pin|LED2_R_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
/*Configure GPIO pin : INPUT_5V_Pin */
GPIO_InitStruct.Pin = INPUT_5V_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin LED2_R_Pin PWR_CTL_Pin */
+ GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|PWR_CTL_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pins : DW_WKUP_Pin DW_CTRL_Pin LED2_G_Pin */
GPIO_InitStruct.Pin = DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin;
@@ -713,20 +880,54 @@
/*Enter the Standby mode*/
HAL_PWR_EnterSTANDBYMode();
}
-extern float nomove_count;
-
+extern uint8_t tx_near_msg[80],stationary_flag;
+float key_keeptime;
+extern float freqlost_count;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
static uint8_t i=0;
i++;
g_start_send_flag=1;
current_slotnum++;
+ freqlost_count+=1/(float)tag_frequency;
+ if(freqlost_count>FREQ_LOST_TIME)
+ {
+ tag_frequency = NOTAG_FREQ;
+ }
SetNextPollTime(tyncpoll_time);
- nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
- if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&imu_enable)
- {
- // mcu_sleep();
+ nomove_count+=1/(float)tag_frequency;
+ if(motor_keeptime>0)
+ {
+ nomove_count+=1/(float)tag_frequency;
}
+ if(!GET_USERKEY)
+ {
+ key_keeptime+=1/(float)tag_frequency;
+ if(key_keeptime>=KEY_KEEPRESET_TIME)
+ {
+ g_com_map[ACTIVE_INDEX]=!active_flag;
+ save_com_map_to_flash();
+ MOTOR_ON;
+ HAL_Delay(2000);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
+ }
+ }else{
+ key_keeptime=0;
+ }
+// if(nomove_count>STATIONARY_TIME)
+// {
+// stationary_flag = 1;
+// }else{
+// stationary_flag = 0;
+// }
+//if(nomove_count>=nomovesleeptime-1&&imu_enable)
+// {
+// tx_near_msg[TAGSTATE] = tx_near_msg[TAGSTATE]|GOINGSLEEPBIT;
+// }
+// if(nomove_count>nomovesleeptime&&imu_enable)
+// {
+// mcu_sleep();
+// }
}
/* USER CODE END 4 */
@@ -751,7 +952,7 @@
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
-{
+{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
--
Gitblit v1.9.3