From 6e24113e302a99f943d0040d075d67963e570689 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期四, 11 十一月 2021 18:00:55 +0800
Subject: [PATCH] I2C 改好
---
Src/main.c | 23 ++++++++++++-----------
1 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index c208622..affb7fd 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -281,7 +281,7 @@
hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x022a;
+ g_com_map[VERSION] = 0x022b;
// g_com_map[DEV_ID]=0x7;
#ifdef DEBUG_MODE
@@ -313,7 +313,7 @@
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
//slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
- slottime = 5;
+ slottime = 5;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
@@ -352,14 +352,15 @@
void HardWareTypeDiffConfig(void)
{
-GPIO_InitTypeDef GPIO_InitStruct = {0};
-hardware_type=2;
-if(hardware_type == 0)
- hardware_type = 1;
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(g_com_map[MOTORBEEPER_INDEX]!=1&&g_com_map[MOTORBEEPER_INDEX]!=2)
+ {
+ g_com_map[MOTORBEEPER_INDEX] = 2;
+ }
+ hardware_type = g_com_map[MOTORBEEPER_INDEX];
switch(hardware_type)
{
- case 1:
-
+ case 1:
HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
GPIO_InitStruct.Pin = MOTOR_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
@@ -819,10 +820,10 @@
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOA, SPI_CS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOB, SCL_Pin|SDA_Pin|BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
@@ -841,7 +842,7 @@
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+ HAL_GPIO_Init(SCL_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pin : SPI_CS_Pin */
GPIO_InitStruct.Pin = SPI_CS_Pin;
--
Gitblit v1.9.3