From 732d7c16689595f70092080fa39eb1b39dabcb41 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期一, 19 四月 2021 16:08:24 +0800
Subject: [PATCH] V1.22 增加蜂鸣器功能 重新生成工程文件
---
Src/stm32l0xx_hal_msp.c | 110 +++++++++++++++++++++++++++++++++++++++++++++---------
1 files changed, 91 insertions(+), 19 deletions(-)
diff --git a/Src/stm32l0xx_hal_msp.c b/Src/stm32l0xx_hal_msp.c
index ff9b560..8f3e19a 100644
--- a/Src/stm32l0xx_hal_msp.c
+++ b/Src/stm32l0xx_hal_msp.c
@@ -61,7 +61,9 @@
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
-/**
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+ /**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
@@ -96,10 +98,10 @@
/* USER CODE END ADC1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_ADC1_CLK_ENABLE();
-
+
__HAL_RCC_GPIOA_CLK_ENABLE();
- /**ADC GPIO Configuration
- PA1 ------> ADC_IN1
+ /**ADC GPIO Configuration
+ PA1 ------> ADC_IN1
*/
GPIO_InitStruct.Pin = BAT_MEAS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -128,9 +130,9 @@
/* USER CODE END ADC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ADC1_CLK_DISABLE();
-
- /**ADC GPIO Configuration
- PA1 ------> ADC_IN1
+
+ /**ADC GPIO Configuration
+ PA1 ------> ADC_IN1
*/
HAL_GPIO_DeInit(BAT_MEAS_GPIO_Port, BAT_MEAS_Pin);
@@ -207,12 +209,12 @@
/* USER CODE END SPI1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI1_CLK_ENABLE();
-
+
__HAL_RCC_GPIOA_CLK_ENABLE();
- /**SPI1 GPIO Configuration
+ /**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
- PA7 ------> SPI1_MOSI
+ PA7 ------> SPI1_MOSI
*/
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -243,17 +245,87 @@
/* USER CODE END SPI1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI1_CLK_DISABLE();
-
- /**SPI1 GPIO Configuration
+
+ /**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
- PA7 ------> SPI1_MOSI
+ PA7 ------> SPI1_MOSI
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
/* USER CODE BEGIN SPI1_MspDeInit 1 */
/* USER CODE END SPI1_MspDeInit 1 */
+ }
+
+}
+
+/**
+* @brief TIM_Base MSP Initialization
+* This function configures the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
+{
+ if(htim_base->Instance==TIM2)
+ {
+ /* USER CODE BEGIN TIM2_MspInit 0 */
+
+ /* USER CODE END TIM2_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_TIM2_CLK_ENABLE();
+ /* USER CODE BEGIN TIM2_MspInit 1 */
+
+ /* USER CODE END TIM2_MspInit 1 */
+ }
+
+}
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(htim->Instance==TIM2)
+ {
+ /* USER CODE BEGIN TIM2_MspPostInit 0 */
+
+ /* USER CODE END TIM2_MspPostInit 0 */
+
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ /**TIM2 GPIO Configuration
+ PB10 ------> TIM2_CH3
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF2_TIM2;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN TIM2_MspPostInit 1 */
+
+ /* USER CODE END TIM2_MspPostInit 1 */
+ }
+
+}
+/**
+* @brief TIM_Base MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
+{
+ if(htim_base->Instance==TIM2)
+ {
+ /* USER CODE BEGIN TIM2_MspDeInit 0 */
+
+ /* USER CODE END TIM2_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_TIM2_CLK_DISABLE();
+ /* USER CODE BEGIN TIM2_MspDeInit 1 */
+
+ /* USER CODE END TIM2_MspDeInit 1 */
}
}
@@ -274,11 +346,11 @@
/* USER CODE END USART1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
-
+
__HAL_RCC_GPIOA_CLK_ENABLE();
- /**USART1 GPIO Configuration
+ /**USART1 GPIO Configuration
PA9 ------> USART1_TX
- PA10 ------> USART1_RX
+ PA10 ------> USART1_RX
*/
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -347,10 +419,10 @@
/* USER CODE END USART1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART1_CLK_DISABLE();
-
- /**USART1 GPIO Configuration
+
+ /**USART1 GPIO Configuration
PA9 ------> USART1_TX
- PA10 ------> USART1_RX
+ PA10 ------> USART1_RX
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
--
Gitblit v1.9.3