From 8dd2c20ddb32d065b877d66394e52a73c0376838 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期二, 13 五月 2025 09:39:54 +0800
Subject: [PATCH] 1.72，加入拉高lora的cs脚，兼容带lora的免布线基站
---
Src/main.c | 504 +++++++++++++++++++++++++------------------------------
1 files changed, 228 insertions(+), 276 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index c704710..d3ecf83 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -55,11 +55,11 @@
/* Private variables ---------------------------------------------------------*/
ADC_HandleTypeDef hadc;
+IWDG_HandleTypeDef hiwdg;
+
LPTIM_HandleTypeDef hlptim1;
SPI_HandleTypeDef hspi1;
-
-TIM_HandleTypeDef htim2;
UART_HandleTypeDef huart1;
DMA_HandleTypeDef hdma_usart1_rx;
@@ -75,9 +75,9 @@
static void MX_LPTIM1_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_SPI1_Init(void);
-static void MX_ADC_Init(void);
+void MX_ADC_Init(void);
static void MX_DMA_Init(void);
-static void MX_TIM2_Init(void);
+static void MX_IWDG_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@@ -110,85 +110,45 @@
Error_Handler();
}
}
+static void MX_DMA_DeInit(void)
+{
+
+ /* DMA controller clock enable */
+ __HAL_RCC_DMA1_CLK_DISABLE();
+
+ /* DMA interrupt init */
+ /* DMA1_Channel2_3_IRQn interrupt configuration */
+ // HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 1, 0);
+ HAL_NVIC_DisableIRQ(DMA1_Channel2_3_IRQn);
+
+}
+void UsartDeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ waitusart_timer = 0;
+ MX_DMA_DeInit();
+ HAL_UART_DeInit(&huart1);
+ GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
uint16_t hardware_version,hardware_pici,hardware_type;
-uint8_t state5v;
+uint8_t state5v = 1;
float motor_keeptime;
void IdleTask(void)
{u16 current_time;
-
- UART_CheckReceive();
- UART_CheckSend();
-
-if(huart1.Instance->ISR&USART_ISR_FE)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
-//if(!HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
-//{
-// LED_TR_ON;
-// LED_TB_OFF;
-//}else{
-// LED_TR_OFF;
- current_time=GetLPTime();
- //motor_state=2;
-// if(g_com_map[MOTOR_ONTIME]>0)
+//if(huart1.Instance->ISR&USART_ISR_FE)
// {
-// g_com_map[MOTOR_ONTIME]--;
-// motor_state = 1;
-// }
-if(0)//g_com_map[MOTOR_ENABLE])
-{
-
-
- switch(motor_state)
- {case 0:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 1:
- if(current_time<MOTOR_ONTIME)
- {
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- }else{
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- }
- break;
- case 2:
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 3:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- }
-}
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+// }
if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
+
+ UART_CheckReceive();
+ UART_CheckSend();
nomove_count = 0;
- bat_percent=Get_Battary();
+ // bat_percent=Get_Battary();
if(state5v==0)
{
state5v=1;
@@ -203,46 +163,18 @@
LED_LG_OFF;
}
}else{
- state5v=0;
+ if(state5v==1)
+ {
+ state5v=0;
+ UsartDeInit();
+ }
LED_LR_OFF;
LED_LG_OFF;
// }
}
- if(g_com_map[CNT_UPDATE]==1)
- {
- uint32_t result = 0;
- uint16_t tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 128);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- g_com_map[CNT_UPDATE]=0;
- save_com_map_to_flash();
- delay_ms(100);
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_REBOOT]==1)
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
{
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_RESTART]==1)
- {
- g_com_map[CNT_RESTART]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
}
@@ -250,51 +182,33 @@
u16 total_slotnum,current_slotnum;
extern int32_t offsettimeus;
-
+u16 last_lpcount = 0;
void SetNextPollTime(u16 time)
{
int32_t lpcount,lptime,target_time;
- if(current_slotnum>=total_slotnum)
- current_slotnum-=total_slotnum;
-
- target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
- //if(target_time<90000)
- {
- lptime=target_time-offsettimeus;
- lpcount = lptime/LPTIMER_LSB;
- if(lpcount>LPTIMER_1S_COUNT)
- lpcount-=LPTIMER_1S_COUNT;
- if(lpcount<0)
- {
- lpcount+=LPTIMER_1S_COUNT;
- }
+// if(current_slotnum>=total_slotnum)
+// current_slotnum-=total_slotnum;
+//
+// target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
+// //if(target_time<90000)
+// {
+// lptime=target_time-offsettimeus;
+// lpcount = lptime/LPTIMER_LSB;
+// if(lpcount>LPTIMER_1S_COUNT)
+// lpcount-=LPTIMER_1S_COUNT;
+// if(lpcount<0)
+// {
+// lpcount+=LPTIMER_1S_COUNT;
+// }
+ lpcount = last_lpcount+32768/tag_frequency-time*LPTIMER_LSB;
+ while(lpcount>LPTIMER_1S_COUNT)
+ {
+ lpcount-=LPTIMER_1S_COUNT;
+ }
+ last_lpcount = lpcount;
__HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
-}
-}
-void HardWareTypeDiffConfig(void)
-{
-GPIO_InitTypeDef GPIO_InitStruct = {0};
-//hardware_type=2;
-if(hardware_type == 0)
- hardware_type = 1;
- switch(hardware_type)
- {
- case 1:
-
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
- GPIO_InitStruct.Pin = MOTOR_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- break;
- case 2:
- MX_TIM2_Init();
- //BarInit();
- break;
- }
}
u8 active_flag,nomovesleeptime;
void Program_Init(void)
@@ -307,9 +221,20 @@
hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = (1<<8)|35;
+ g_com_map[VERSION] = (1<<8)|72;
+
+ #ifdef DEBUG_MODE
+ // g_com_map[GROUP_ID]=21;
+// g_com_map[DEV_ID]=4;
+ // g_com_map[COM_INTERVAL]=100;
+ // g_com_map[MAX_REPORT_ANC_NUM]=1;
+ // g_com_map[NOMOVESLEEP_TIME]=10;
+ #endif
+// g_com_map[GROUP_ID]=3;
+ g_com_map[COM_INTERVAL] = 1000;
active_flag = g_com_map[ACTIVE_INDEX];
- module_power = g_com_map[POWER];
+ module_power = g_com_map[POWER];
+ g_com_map[IMU_ENABLE] = 0;
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
@@ -328,13 +253,8 @@
imu_enable=1;
nomovesleeptime =10;
}
-#ifdef DEBUG_MODE
-// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=1;
-// g_com_map[COM_INTERVAL]=100;
-// g_com_map[MAX_REPORT_ANC_NUM]=1;
-// g_com_map[NOMOVESLEEP_TIME]=10;
-#endif
+
+ // g_com_map[COM_INTERVAL]=100;
if(g_com_map[COM_INTERVAL]==0)
{
g_com_map[COM_INTERVAL]=100;
@@ -351,11 +271,8 @@
Error_Handler();
}
//g_com_map[NOMOVESLEEP_TIME]=5;
- printf("标签ID: %d .\r\n",dev_id);
- printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
- printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
-
-
+ printf("固件版本: 免布线基站 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -383,6 +300,44 @@
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
//SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+}
+uint16_t temp2;
+float dw_vbat,last_vbat;
+uint8_t Get_Battary_UWB(void)
+{
+ static uint8_t first = 1;
+ static float last_value = 100;
+ static uint16_t bat_count = 0;
+ //if(bat_count++%600==0)
+ {
+ temp2=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp2&0xff)-173)/173+3.3;
+ if(fabs(dw_vbat-dw_vbat)>0.2)
+ {
+ last_vbat = dw_vbat;
+ return last_value;
+ }
+ last_vbat = dw_vbat;
+ if(dw_vbat>=3.0)
+ {
+ if(first)
+ {
+ first = 0;
+ last_value =(dw_vbat-3.0)*167;//(bat_volt-3.5)/0.6*100
+ }
+ last_value = 0.9*last_value + (dw_vbat-3.0)*16.7;
+ if(last_value>100)
+ last_value = 100;
+ if(last_value<0)
+ last_value = 0;
+ }
+ }
+ return last_value;
+}
+void MX_ADC_DeInit(void)
+{
+ HAL_ADC_DeInit(&hadc);
+ HAL_ADCEx_DisableVREFINT();
}
/* USER CODE END 0 */
@@ -415,28 +370,34 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_LPTIM1_Init();
- MX_DMA_Init();
+ MX_DMA_Init();
MX_USART1_UART_Init();
MX_SPI1_Init();
MX_ADC_Init();
-
-// MX_TIM2_Init();
+ MX_IWDG_Init();
/* USER CODE BEGIN 2 */
- LED_LG_ON;
- Program_Init();
- LIS3DH_Data_Init();
- Dw1000_Init();
- Dw1000_App_Init();
- HardWareTypeDiffConfig();
- dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- dwt_entersleep();
- waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
- DW_DISABLE;
- if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
- {
- Error_Handler();
- }
-// HAL_Delay(2000);
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_5, GPIO_PIN_SET);
+ GPIO_InitStruct.Pin = GPIO_PIN_5;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ LED_LG_ON;
+ Program_Init();
+ // LIS3DH_Data_Init();
+ Dw1000_Init();
+ Dw1000_App_Init();
+ // HardWareTypeDiffConfig();
+ dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
+ dwt_entersleep();
+ DW_DISABLE;
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+ HAL_Delay(1000);
// mcu_sleep();
//LED0_BLINK;
// SystemPower_Config();
@@ -450,11 +411,12 @@
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
- if(g_start_send_flag&&active_flag)
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_SET);
+ if(g_start_send_flag)
{ static uint16_t blink_count=0;
SystemClock_Config();
g_start_send_flag = 0;
-
+ HAL_IWDG_Refresh(&hiwdg);
// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
// {
// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
@@ -463,7 +425,7 @@
// }
// LED_TR_BLINK;s
- bat_percent=Get_Battary();
+
if(bat_percent>15)
{ LED_TB_ON;
Tag_App();
@@ -478,20 +440,21 @@
if(waitusart_timer>0)
{
waitusart_timer--;
- }
- if(m_bEUARTTxEn==0&&waitusart_timer==0)
- {
-#ifndef DEBUG_MODE
-if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-#endif
- }
-
-
+ }
}else{
IdleTask();
}
-
+ if(m_bEUARTTxEn==0&&waitusart_timer==0)
+ {
+ if(memcmp(g_com_map2,g_com_map,200)!=0)
+ {
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
+ }
+ #ifndef DEBUG_MODE
+ if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ #endif
+ }
// HAL_Delay(100);
// Get_Battary();
@@ -516,13 +479,15 @@
/** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
- __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
+ __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_HIGH);
/** Initializes the CPU, AHB and APB busses clocks
*/
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI
+ |RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
@@ -559,7 +524,7 @@
* @param None
* @retval None
*/
-static void MX_ADC_Init(void)
+void MX_ADC_Init(void)
{
/* USER CODE BEGIN ADC_Init 0 */
@@ -577,7 +542,7 @@
hadc.Init.OversamplingMode = DISABLE;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
- hadc.Init.SamplingTime = ADC_SAMPLETIME_160CYCLES_5;
+ hadc.Init.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.ContinuousConvMode = DISABLE;
@@ -596,15 +561,45 @@
}
/** Configure for the selected ADC regular channel to be converted.
*/
- sConfig.Channel = ADC_CHANNEL_1;
+ sConfig.Channel = ADC_CHANNEL_VREFINT;
sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC_Init 2 */
-HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
+ HAL_ADCEx_EnableVREFINT();
+ HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
/* USER CODE END ADC_Init 2 */
+
+}
+
+/**
+ * @brief IWDG Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_IWDG_Init(void)
+{
+
+ /* USER CODE BEGIN IWDG_Init 0 */
+
+ /* USER CODE END IWDG_Init 0 */
+
+ /* USER CODE BEGIN IWDG_Init 1 */
+
+ /* USER CODE END IWDG_Init 1 */
+ hiwdg.Instance = IWDG;
+ hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
+ hiwdg.Init.Window = 4095;
+ hiwdg.Init.Reload = 4095;
+ if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN IWDG_Init 2 */
+
+ /* USER CODE END IWDG_Init 2 */
}
@@ -678,69 +673,6 @@
/* USER CODE BEGIN SPI1_Init 2 */
__HAL_SPI_ENABLE(&hspi1);
/* USER CODE END SPI1_Init 2 */
-
-}
-
-/**
- * @brief TIM2 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_TIM2_Init(void)
-{
-
- /* USER CODE BEGIN TIM2_Init 0 */
-
- /* USER CODE END TIM2_Init 0 */
-
- TIM_ClockConfigTypeDef sClockSourceConfig = {0};
- TIM_MasterConfigTypeDef sMasterConfig = {0};
- TIM_OC_InitTypeDef sConfigOC = {0};
-
- /* USER CODE BEGIN TIM2_Init 1 */
-
- /* USER CODE END TIM2_Init 1 */
- htim2.Instance = TIM2;
- htim2.Init.Prescaler = 9;
- htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
- htim2.Init.Period = 1171;
- htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
- htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
- if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
- {
- Error_Handler();
- }
- if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
- sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
- if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
- {
- Error_Handler();
- }
- sConfigOC.OCMode = TIM_OCMODE_PWM1;
- sConfigOC.Pulse = 599;
- sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
- if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN TIM2_Init 2 */
-//if(HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3) != HAL_OK)
-// {
-// /* Starting Error */
-// Error_Handler();
-// }
- /* USER CODE END TIM2_Init 2 */
- HAL_TIM_MspPostInit(&htim2);
}
@@ -926,21 +858,41 @@
}
extern uint8_t tx_near_msg[80],stationary_flag;
float key_keeptime;
+extern float freqlost_count,range_lost_time;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
- static uint8_t i=0;
+ static uint8_t i=0,lost_jumpcount=0;
i++;
- g_start_send_flag=1;
+
current_slotnum++;
- SetNextPollTime(tyncpoll_time);
- nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
+ freqlost_count+=1/(float)tag_frequency;
+ range_lost_time +=1/(float)tag_frequency;
+
+ if(freqlost_count>FREQ_LOST_TIME)
+ {
+ tag_frequency = NOTAG_FREQ;
+ if(lost_jumpcount++>=4) //无测距情况下，每5秒发一次；
+ {
+ lost_jumpcount = 0;
+ g_start_send_flag=1;
+ }
+ }else{
+ g_start_send_flag=1;
+ }
+ if(range_lost_time<1||freqlost_count>FREQ_LOST_TIME)
+ {
+ SetNextPollTime(0);
+ }else{
+ SetNextPollTime(5);
+ }
+ nomove_count+=1/(float)tag_frequency;
if(motor_keeptime>0)
{
- motor_keeptime-=(float)g_com_map[COM_INTERVAL]/1000;
+ nomove_count+=1/(float)tag_frequency;
}
if(!GET_USERKEY)
{
- key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
+ key_keeptime+=1/(float)tag_frequency;
if(key_keeptime>=KEY_KEEPRESET_TIME)
{
g_com_map[ACTIVE_INDEX]=!active_flag;
@@ -952,12 +904,12 @@
}else{
key_keeptime=0;
}
- if(nomove_count>STATIONARY_TIME)
- {
- stationary_flag = 1;
- }else{
- stationary_flag = 0;
- }
+// if(nomove_count>STATIONARY_TIME)
+// {
+// stationary_flag = 1;
+// }else{
+// stationary_flag = 0;
+// }
//if(nomove_count>=nomovesleeptime-1&&imu_enable)
// {
// tx_near_msg[TAGSTATE] = tx_near_msg[TAGSTATE]|GOINGSLEEPBIT;
--
Gitblit v1.9.3