From 8f191911d62fe7a9a18b23aaa2e27e23dc8bf58f Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期三, 02 四月 2025 14:38:51 +0800
Subject: [PATCH] 2.55 开启休眠功能
---
Src/radio/Lora.c | 53 ++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 36 insertions(+), 17 deletions(-)
diff --git a/Src/radio/Lora.c b/Src/radio/Lora.c
index c4fe696..720a375 100644
--- a/Src/radio/Lora.c
+++ b/Src/radio/Lora.c
@@ -176,6 +176,10 @@
printf("网关下发配置写入完成，重启");
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+ if(wg_report_freq==END_FREQ)
+ {
+ SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
+ }
Radio.Standby();
if(LoraUp_flag)
{
@@ -248,6 +252,7 @@
int32_t target_count;
extern uint16_t motor_keeptime;
uint8_t shengji_flag;
+
void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr )
{ uint16_t checksum1;
BufferSize = size;
@@ -259,9 +264,13 @@
lora_up_rec_flag=1;
if(RX_Buffer[MSG_TYPE_IDX]==LORA_MSGTYPE_RANGEPOLL)
{
+
+ // HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
UWB_Wkup();
- MbxTagUwbRec();
- HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_RESET); //片选lora有效
+ // HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_SET);
+ MbxTagUwbRec();
+ // HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_RESET); //片选lora有效
+ // Radio.Rx(0);
}
if(RX_Buffer[MSG_TYPE_IDX]==LORA_MSGTYPE_WGRESPTAG)
{
@@ -301,7 +310,7 @@
while(target_count>=32768)
target_count-=32768;
__HAL_LPTIM_COMPARE_SET(&hlptim1, target_count);
- rx_count = HAL_LPTIM_ReadCounter(&hlptim1);
+ // rx_count = HAL_LPTIM_ReadCounter(&hlptim1);
// printf("tx %d,rx %d,delay %d",current_count>>5,rx_count>>5,rec_delaytime);
break;
case WGRSP_RWTAG_READ:
@@ -338,10 +347,10 @@
{}//文件过大，超出范围
else
{
- memcpy(&wangguan_up_id,&RX_Buffer[SOURCE_ID_IDX],2);//网关ID 占用2个字节
- shengji_flag=1;
- LoraUp_flag=1;
- imu_enable=0;
+ memcpy(&wangguan_up_id,&RX_Buffer[SOURCE_ID_IDX],2);//网关ID 占用2个字节
+ shengji_flag=1;
+ LoraUp_flag=1;
+ imu_enable=0;
}
// LoraUp_Poll();
break;
@@ -350,39 +359,46 @@
}
}
}
- }
+
+}
if(!no_rx_flag)
{
if(lora_jianting_flag&&LoraUp_flag==0)
{
- SwitchLoraSettings(UWB_CHANNEL_FRQ+g_com_map[GROUP_ID],UWB_CHANNEL_SF,0);
+ SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
Radio.Rx(0);
}
}
+HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
+
}
void OnTxTimeout( void )
{
Radio.Standby();
if(lora_jianting_flag)
- SwitchLoraSettings(UWB_CHANNEL_FRQ+g_com_map[GROUP_ID],UWB_CHANNEL_SF,0);
+ {
+ SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
+ Radio.Rx(0);
+ }
}
uint8_t tm;
uint16_t Lora_rece_error;
void OnRxTimeout( void )
{
Radio.Standby();
- if(wg_state==WG_Lost)
+
{
- current_count = HAL_LPTIM_ReadCounter(&hlptim1);
- target_count-=current_count%3276;
+// current_count = HAL_LPTIM_ReadCounter(&hlptim1);
+// target_count-=current_count%3276;
+ target_count-=66;//提前2ms发lora
while(target_count<0)
target_count+=32768;
__HAL_LPTIM_COMPARE_SET(&hlptim1, target_count);
}
if(lora_jianting_flag)
{
- SwitchLoraSettings(UWB_CHANNEL_FRQ+g_com_map[GROUP_ID],UWB_CHANNEL_SF,0);
+ SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
Radio.Rx(0);
}
}
@@ -392,7 +408,10 @@
Radio.Standby();
if(lora_jianting_flag)
- SwitchLoraSettings(UWB_CHANNEL_FRQ+g_com_map[GROUP_ID],UWB_CHANNEL_SF,0);
+ {
+ SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
+ Radio.Rx(0);
+ }
}
uint16_t freq_test;
@@ -431,7 +450,7 @@
RadioEvents.RxError = OnRxError;
Radio.Init( &RadioEvents );
- SwitchLoraSettings(UWB_CHANNEL_FRQ+g_com_map[GROUP_ID],5,0); //切换lora接收频点
+ SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0); //切换lora接收频点
if(active_flag)
{
Radio.Rx( 0 );
@@ -458,7 +477,7 @@
if(shengji_flag)
{
// memcpy(&wangguan_up_id,&RX_Buffer[SOURCE_ID_IDX],2);//网关ID 占用2个字节
- send_lora_data[MSG_TYPE_IDX]=LORA_MSGTYPE_UPDATE_CONFIRM;
+ send_lora_data[MSG_TYPE_IDX]=LORA_MSGTYPE_UPDATE_CONFIRM2;
memcpy(&send_lora_data[SOURCE_ID_IDX],&dev_id,2);//网关ID 占用2个字节
memcpy(&send_lora_data[DEST_ID_IDX],&wangguan_up_id,2);//标签或者基站的设备ID 2个字节
// send_lora_data[MUQIAN_BAG]=0xFF;
--
Gitblit v1.9.3