From 8f191911d62fe7a9a18b23aaa2e27e23dc8bf58f Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期三, 02 四月 2025 14:38:51 +0800
Subject: [PATCH] 2.55 开启休眠功能
---
Src/radio/Lora.c | 15 +++++++++++----
1 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/Src/radio/Lora.c b/Src/radio/Lora.c
index ff6aaa1..720a375 100644
--- a/Src/radio/Lora.c
+++ b/Src/radio/Lora.c
@@ -176,6 +176,10 @@
printf("网关下发配置写入完成，重启");
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
+ if(wg_report_freq==END_FREQ)
+ {
+ SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
+ }
Radio.Standby();
if(LoraUp_flag)
{
@@ -248,6 +252,7 @@
int32_t target_count;
extern uint16_t motor_keeptime;
uint8_t shengji_flag;
+
void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr )
{ uint16_t checksum1;
BufferSize = size;
@@ -259,12 +264,13 @@
lora_up_rec_flag=1;
if(RX_Buffer[MSG_TYPE_IDX]==LORA_MSGTYPE_RANGEPOLL)
{
+
// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
UWB_Wkup();
// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_SET);
MbxTagUwbRec();
// HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_RESET); //片选lora有效
- Radio.Rx(0);
+ // Radio.Rx(0);
}
if(RX_Buffer[MSG_TYPE_IDX]==LORA_MSGTYPE_WGRESPTAG)
{
@@ -303,7 +309,7 @@
target_count = current_count + rec_delaytime*3.2768 - delaytime-datalen_offset;
while(target_count>=32768)
target_count-=32768;
- //__HAL_LPTIM_COMPARE_SET(&hlptim1, target_count);
+ __HAL_LPTIM_COMPARE_SET(&hlptim1, target_count);
// rx_count = HAL_LPTIM_ReadCounter(&hlptim1);
// printf("tx %d,rx %d,delay %d",current_count>>5,rx_count>>5,rec_delaytime);
break;
@@ -353,6 +359,8 @@
}
}
}
+
+}
if(!no_rx_flag)
{
if(lora_jianting_flag&&LoraUp_flag==0)
@@ -361,7 +369,6 @@
Radio.Rx(0);
}
}
-}
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
}
@@ -470,7 +477,7 @@
if(shengji_flag)
{
// memcpy(&wangguan_up_id,&RX_Buffer[SOURCE_ID_IDX],2);//网关ID 占用2个字节
- send_lora_data[MSG_TYPE_IDX]=LORA_MSGTYPE_UPDATE_CONFIRM;
+ send_lora_data[MSG_TYPE_IDX]=LORA_MSGTYPE_UPDATE_CONFIRM2;
memcpy(&send_lora_data[SOURCE_ID_IDX],&dev_id,2);//网关ID 占用2个字节
memcpy(&send_lora_data[DEST_ID_IDX],&wangguan_up_id,2);//标签或者基站的设备ID 2个字节
// send_lora_data[MUQIAN_BAG]=0xFF;
--
Gitblit v1.9.3