From 7c12dad5dc25593b4e23ad0bc092be8cb9542167 Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期二, 01 十一月 2022 17:49:13 +0800
Subject: [PATCH] V1.37
---
Src/application/dw_app.c | 121 +++++++++++++++++++---------------------
1 files changed, 58 insertions(+), 63 deletions(-)
diff --git a/Src/application/dw_app.c b/Src/application/dw_app.c
index 05052a3..d76461a 100644
--- a/Src/application/dw_app.c
+++ b/Src/application/dw_app.c
@@ -30,6 +30,7 @@
#include "beep.h"
#include "modbus.h"
+#define USART_INTEGRATE_OUTPUT
/*------------------------------------ Marcos ------------------------------------------*/
/* Inter-ranging delay period, in milliseconds. */
#define RNG_DELAY_MS 100
@@ -47,7 +48,7 @@
#define POLL_TX_TO_RESP_RX_DLY_UUS 150
/* This is the delay from Frame RX timestamp to TX reply timestamp used for calculating/setting the DW1000's delayed TX function. This includes the
* frame length of approximately 2.66 ms with above configuration. */
-#define RESP_RX_TO_FINAL_TX_DLY_UUS 410
+#define RESP_RX_TO_FINAL_TX_DLY_UUS 2410
/* Receive response timeout. See NOTE 5 below. */
#define RESP_RX_TIMEOUT_UUS 600
@@ -83,7 +84,7 @@
DWT_PAC8, /* Preamble acquisition chunk size. Used in RX only. */
9, /* TX preamble code. Used in TX only. */
9, /* RX preamble code. Used in RX only. */
- 0, /* Use non-standard SFD (Boolean) */
+ 1, /* Use non-standard SFD (Boolean) */
DWT_BR_6M8, /* Data rate. */
DWT_PHRMODE_STD, /* PHY header mode. */
(129 + 8 - 8) /* SFD timeout (preamble length + 1 + SFD length - PAC size). Used in RX only. */
@@ -294,7 +295,29 @@
u8 nearbase_num=0,last_nearbase_num,next_nearbase_num,last_slotnum, para_update,para_len,stationary_flag=0;
u32 rec_tagpos_binary;
int16_t offset=2700;
+extern int16_t g_commap_antdelay;
u8 motor_state,rec_remotepara_state,rec_remotepara[80];
+ double firstpath_power,firstpath_power2, rx_power,rec_firstpath_power;
+ double f1, f2, r1, r2;
+uint16_t F1,F2,F3,N,C;
+double B = 131072;
+double A = 121.74;
+double min_power;
+ dwt_rxdiag_t d1;
+double LOS(dwt_rxdiag_t *dia) {
+ F1 = dia->firstPathAmp1;
+ F2 = dia->firstPathAmp2;
+ F3 = dia->firstPathAmp3;
+ N = dia->rxPreamCount;
+ C = dia->maxGrowthCIR;
+
+ firstpath_power=10* log10((F1*F1+F2*F2+F3*F3)/(N*N))-A;
+ rx_power=10*log10(C*B/(N*N))-A;
+
+ // min_power = - 10 * log10((F1 *F1 + F2 * F2 + F3 * F3) / (C *B));
+ return min_power;
+ }
+
void NearPoll(void)
{
@@ -316,16 +339,17 @@
nearbase_num=next_nearbase_num;
recbase_num=0;
// motor_state=0;
-
+ tx_near_msg[GROUP_ID_IDX] = group_id;
tx_near_msg[BATTARY_IDX] = bat_percent;
tx_near_msg[BUTTON_IDX] = !GET_USERKEY|stationary_flag<<1;
tx_near_msg[SEQUENCE_IDX] = frame_seq_nb++;
tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
memcpy(&tx_near_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_POLL;
+ memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*4],&g_commap_antdelay,2);
memcpy(&tx_near_msg[ANCHOR_ID_IDX],&mainbase_id,2);
- dwt_writetxdata(13+2*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
- dwt_writetxfctrl(13+2*nearbase_num, 0);//设置超宽带发送数据长度
+ dwt_writetxdata(15+4*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
+ dwt_writetxfctrl(15+4*nearbase_num, 0);//设置超宽带发送数据长度
dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
tx_near_msg[TAGCONFIGSUCCESS_INDEX] =0;
@@ -376,7 +400,7 @@
dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
dwt_setrxtimeout(0);//DELAY_BETWEEN_TWO_FRAME_UUS*(nearbase_num+1-recbase_num)+10);//设定接收超时时间，0位没有超时时间
dwt_rxenable(0);//打开接收
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
+ if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)&&rx_buffer[GROUP_ID_IDX]==group_id) //判断接收到的数据是否是response数据
{ u16 rec_nearbaseid,rec_nearbasepos;
poll_tx_ts = get_tx_timestamp_u64(); //获得POLL发送时间T1
resp_rx_ts = get_rx_timestamp_u64(); //获得RESPONSE接收时间T4
@@ -429,13 +453,15 @@
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX], resp_rx_ts);
final_msg_set_ts(&tx_near_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
tx_near_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
-
+ tx_near_msg[GROUP_ID_IDX] = group_id;
dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
flag_getresponse=1;
memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
-
+ dwt_readdiagnostics(&d1);
+ LOS(&d1);
+ tx_near_msg[TAGRXPOWER_IDX] = -(int)firstpath_power;
//时间同步
ancsync_time=((sync_timer)*1000+tmp_time);
@@ -446,36 +472,17 @@
lastsync_timer=sync_timer;
offsettimeus=ancsync_time-current_count*LPTIMER_LSB+offset;
SetNextPollTime(tyncpoll_time);
- if(rec_remotepara_state&&rec_remotepara_state!=g_com_map[REMOTEPARA_STATE])
+ if(rec_remotepara_state==1)
{
- g_com_map[REMOTEPARA_STATE]=rec_remotepara_state;
- memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],REMOTEPARA_LEN);
+ memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],REMOTEPARA_LEN);
memcpy(&g_com_map[COM_INTERVAL],&rec_remotepara[0],8);
memcpy(&g_com_map[POWER],&rec_remotepara[8],10);
- save_com_map_to_flash();
- delay_ms(100);
- NVIC_SystemReset();
-
- }
-
- // count_offset=sync_count-current_count-143;
- // current_slottimes=(ancsync_time-10000)/(g_com_map[COM_INTERVAL]*1000);
- // nextpoll_delaytime=tyncpoll_time*1000+g_com_map[COM_INTERVAL]*1000-((ancsync_time)%(g_com_map[COM_INTERVAL]*1000))-4300;
-// if(abs(ancsync_time-910000)<1000)
-// {
-// nextpoll_delaytime+=10000;
-// }
-// if(nextpoll_delaytime<2000)
-// {
-// nextpoll_delaytime+=g_com_map[COM_INTERVAL]*1000;
-// }
-// lastpoll_count= current_count+(nextpoll_delaytime)/LPTIMER_LSB;
-// if(lastpoll_count>LPTIMER_1S_COUNT)
-// lastpoll_count-=LPTIMER_1S_COUNT;
-// __HAL_LPTIM_COMPARE_SET(&hlptim1, lastpoll_count);
- /////////////////////////////////////////
-// dwt_setdelayedtrxtime(final_tx_time);
-// result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
+ if(g_com_map[COM_INTERVAL]>0&&g_com_map[COM_INTERVAL]<1000&&g_com_map[POWER]<67&&g_com_map[POWER]>0)
+ {save_com_map_to_flash();
+ delay_ms(100);
+ }
+ NVIC_SystemReset();
+ }
}else{
rec_nearbasepos=FindNearBasePos(rec_nearbaseid);
@@ -494,13 +501,6 @@
if(motor_state<(rx_buffer[MOTORSTATE_INDEX]&0xf)&&(rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
{
motor_state=rx_buffer[MOTORSTATE_INDEX];
- }
- if(rec_remotepara_state&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2))
- {
- para_update = 1;
- tx_near_msg[TAGCONFIGSUCCESS_INDEX] = 1;
- para_len = frame_len-22;
- memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],para_len);
}
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);
dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
@@ -522,9 +522,9 @@
}
if(mainbase_lost_count>tag_frequency*BASELOST_STOPMOTOR_TIME)
{motor_state=0; }
-dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
+ dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
nearbase_num=recbase_num;
- j=0;
+ j=0;
if(exsistbase_list[0]==0)
{
// u8 temp_adc,random_value;
@@ -581,32 +581,26 @@
{
nearbaseid_list[i]=true_nearbase_idlist[i];
nearbase_distlist[i]=true_nearbase_distlist[i];
- if(nearbase_distlist[i]!=0x1ffff&&true_exsistbase_list[i]==0xa)
+ if(nearbase_distlist[i]!=0x1ffff&&true_exsistbase_list[i]==KEEP_TIMES)
{
memcpy(&usart_send[4+6*report_num],&nearbaseid_list[i],2);
memcpy(&usart_send[6+6*report_num],&nearbase_distlist[i],4);
report_num++;
}
}
+ #ifdef USART_INTEGRATE_OUTPUT
+ usart_send[0] = 0x55;
+ usart_send[1] = 0xAA;
+ usart_send[2] = 4;//正常模式
+ usart_send[3] = report_num*6+2;//正常模式
+ checksum = Checksum_u16(&usart_send[2],report_num*6+2);
+ memcpy(&usart_send[4+report_num*6],&checksum,2);
+ USART_puts(usart_send,6+report_num*6);
+ #endif
+
for(i=0;i<MAX_NEARBASE_NUM;i++)
{
nearbase_distlist[i]=0x1ffff;
- }
- if(para_update)
- {
- uint8_t pack_length = 0,pack_index = 0,pack_msgtype = 0;
- pack_msgtype = rec_remotepara[0];
- pack_index = rec_remotepara[1];
- pack_length = rec_remotepara[2];
- if(pack_msgtype==2)
- {
- memcpy((uint8_t*)&g_com_map + pack_index, &rec_remotepara[3], pack_length);
- //返回一个error状态
- //SendComMap(pack_datalen,pack_index);
- save_com_map_to_flash();
- delay_ms(100);
- NVIC_SystemReset();
- }
}
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
@@ -623,6 +617,7 @@
}
memcpy(&tx_near_msg[ANCHOR_ID_IDX],&nearmsg_mainbase,2);
memcpy(&tx_near_msg[TAG_ID_IDX],&dev_id,2);
+ tx_near_msg[GROUP_ID_IDX] = group_id;
tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_MSG;
dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
@@ -659,10 +654,10 @@
tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
}
}
-
+u32 id;
void Tag_App(void)//发送模式(TAG标签)
{
- u32 id;
+
//LED0_ON;
id = dwt_readdevid() ;
while (DWT_DEVICE_ID != id)
--
Gitblit v1.9.3