From 4691492f913d0730703f8fcdacd0a02d455d65a1 Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期一, 29 一月 2024 10:37:32 +0800
Subject: [PATCH] 国新智能V1.7
---
Src/application/dw_app.c | 747 ++++++++++++++++++++++++++++++---------------------------
1 files changed, 390 insertions(+), 357 deletions(-)
diff --git a/Src/application/dw_app.c b/Src/application/dw_app.c
index b9a358d..7086725 100644
--- a/Src/application/dw_app.c
+++ b/Src/application/dw_app.c
@@ -76,8 +76,8 @@
DISCPOLL,
GETNEARMSG,
NEARPOLL,
-} tag_state=GETNEARMSG;
-static dwt_config_t config = {
+} tag_state=NEARPOLL;
+dwt_config_t config = {
5, /* Channel number. */
DWT_PRF_64M, /* Pulse repetition frequency. */
DWT_PLEN_128, /* Preamble length. */
@@ -164,7 +164,14 @@
*ts += ts_field[i] << (i * 8);
}
}
-
+void SetNLOSNTMSettings(void)
+{
+ uint8_t temp;
+ temp = 7;
+ dwt_writetodevice(LDE_IF_ID,LDE_CFG1_OFFSET,1,&temp);
+ dwt_write16bitoffsetreg(LDE_IF_ID,LDE_CFG2_OFFSET,3);
+ // NTM = dwt_read32bitoffsetreg(LDE_IF_ID,LDE_CFG1_OFFSET) & LDE_CFG1_NSTDEV_MASK;
+}
void Dw1000_Init(void)
{
/* Reset and initialise DW1000.
@@ -177,7 +184,7 @@
/* Configure DW1000. See NOTE 6 below. */
dwt_configure(&config);//配置DW1000
-
+ // SetNLOSNTMSettings();
/* Apply default antenna delay value. See NOTE 1 below. */
@@ -285,6 +292,32 @@
}
return max_slotpos-1;
}
+uint32_t rec_tagpos_binary;
+extern uint16_t current_slotnum,total_slotnum;
+uint16_t target_time,last_time;
+uint32_t tagpos_binary;
+void SetNextPollTime(uint16_t time)
+{
+ current_slotnum++;
+ if(current_slotnum==total_slotnum)
+ current_slotnum-=total_slotnum;
+ //time=5;
+ target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time);
+
+ last_time=target_time;
+ if(target_time>=990&&target_time<992)
+ {
+ current_slotnum++;
+ target_time+=g_com_map[COM_INTERVAL];
+ tagslotpos=GetRandomSlotPos(rec_tagpos_binary|tagpos_binary);
+ tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
+ }
+ if(target_time>=1000)
+ {target_time-=1000;}
+ if(target_time<0)
+ {target_time+=1000;}
+
+}
int32_t mainbase_dist,nearbase_distlist[MAX_NEARBASE_NUM],true_nearbase_distlist[MAX_NEARBASE_NUM],true_exsistbase_list[MAX_NEARBASE_NUM],ancsync_time,nextpoll_delaytime,offsettimeus;
u8 anclost_times=0 , mainbase_lost_count=0;
@@ -292,7 +325,7 @@
u8 flag_finalsend,flag_getresponse,flag_rxon;
uint16_t current_count,start_count,end_count,lastsync_timer;
int16_t target_offsettime = 850;
-u32 target_time=100;
+//u32 target_time=100;
u8 pd_i;
u32 temptime,delaytime,expect_anctime;
int32_t error_time;
@@ -366,11 +399,11 @@
__HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
last_lpcount = lpcount;
}
-u8 nearbase_num=0,last_nearbase_num,next_nearbase_num,last_slotnum, para_update,para_len,stationary_flag=0;
+u8 nearbase_num=0,last_nearbase_num,next_nearbase_num,last_slotnum, para_update,para_len;
u32 rec_tagpos_binary;
int16_t offset=2700;
extern int16_t g_commap_antdelay;
-u8 motor_state,rec_remotepara_state,rec_remotepara[80];
+//u8 motor_state,rec_remotepara_state,rec_remotepara[80];
u16 sync_anc_id = 0xffff,sync_anc_losttime = 0;
int32_t ancsync_time,tpos;
void SyncAncUpdate(u16 ancid,int32_t anctime,u16 slotpos)
@@ -383,370 +416,370 @@
sync_anc_id = ancid;
}
}
-void NearPoll(void)
-{
+//void NearPoll(void)
+//{
- uint32_t temp1,temp2,dw_systime;
- uint32_t frame_len;
- uint32_t final_tx_time;
- u32 start_poll;
- u8 i,j,getsync_flag=0,timeout;
- dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
- dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);
- tag_succ_times = 0;
- //
- if(next_nearbase_num>=MAX_NEARBASE_NUM)
- {
- next_nearbase_num = MAX_NEARBASE_NUM-1;
- }
- HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
- last_nearbase_num=next_nearbase_num;
- nearbase_num=next_nearbase_num;
- recbase_num=0;
- if(sync_anc_losttime++>10)
- {
- sync_anc_id = 0xffff;
- }
-// motor_state=0;
- tx_near_msg[GROUP_ID_IDX] = group_id;
- tx_near_msg[BATTARY_IDX] = bat_percent;
- tx_near_msg[BUTTON_IDX] = !GET_USERKEY|stationary_flag<<1;
- tx_near_msg[SEQUENCE_IDX] = frame_seq_nb++;
- tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
- memcpy(&tx_near_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
- tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_POLL;
- memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*4],&g_commap_antdelay,2);
- memcpy(&tx_near_msg[ANCHOR_ID_IDX],&mainbase_id,2);
- dwt_writetxdata(15+4*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
- dwt_writetxfctrl(15+4*nearbase_num, 0);//设置超宽带发送数据长度
-
- current_count=HAL_LPTIM_ReadCounter(&hlptim1);
- while(current_count<poll_startcount||current_count>poll_startcount+16384)
- {
- current_count=HAL_LPTIM_ReadCounter(&hlptim1);
- if(current_count<poll_startcount-300)
- {
- break;
- }
- }
-
- dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
- HAL_GPIO_WritePin(LED1_G_GPIO_Port, LED1_G_Pin, GPIO_PIN_SET);
- tx_near_msg[TAGCONFIGSUCCESS_INDEX] =0;
- para_update = 0;
- flag_finalsend=0;
- flag_rxon=1;
- flag_getresponse=0;
- start_count=HAL_LPTIM_ReadCounter(&hlptim1);
- recbase_num=0;
- timeout=ceil((float)nearbase_num*SLOT_SCALE)+3;
- end_count=start_count+(timeout<<5);
- if(end_count>=32768)
- {
- end_count-=32768;
- }
- mainbase_dist=100000;
- mainbase_lost_count++;
- current_count=HAL_LPTIM_ReadCounter(&hlptim1);
- while(current_count<end_count||current_count>end_count+15000)
- {
- current_count=HAL_LPTIM_ReadCounter(&hlptim1);
- while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
- {
- if(flag_finalsend)
- {
- dw_systime=dwt_readsystimestamphi32();
- if(dw_systime>temp1&&dw_systime<temp2)
- {
+// uint32_t temp1,temp2,dw_systime;
+// uint32_t frame_len;
+// uint32_t final_tx_time;
+// u32 start_poll;
+// u8 i,j,getsync_flag=0,timeout;
+// dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
+// dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);
+// tag_succ_times = 0;
+// //
+// if(next_nearbase_num>=MAX_NEARBASE_NUM)
+// {
+// next_nearbase_num = MAX_NEARBASE_NUM-1;
+// }
+// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
+// last_nearbase_num=next_nearbase_num;
+// nearbase_num=next_nearbase_num;
+// recbase_num=0;
+// if(sync_anc_losttime++>10)
+// {
+// sync_anc_id = 0xffff;
+// }
+//// motor_state=0;
+// tx_near_msg[GROUP_ID_IDX] = group_id;
+// tx_near_msg[BATTARY_IDX] = bat_percent;
+// tx_near_msg[BUTTON_IDX] = !GET_USERKEY|stationary_flag<<1;
+// tx_near_msg[SEQUENCE_IDX] = frame_seq_nb++;
+// tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
+// memcpy(&tx_near_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
+// tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_POLL;
+// memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*4],&g_commap_antdelay,2);
+// memcpy(&tx_near_msg[ANCHOR_ID_IDX],&mainbase_id,2);
+// dwt_writetxdata(15+4*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
+// dwt_writetxfctrl(15+4*nearbase_num, 0);//设置超宽带发送数据长度
+//
+// current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// while(current_count<poll_startcount||current_count>poll_startcount+16384)
+// {
+// current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// if(current_count<poll_startcount-300)
+// {
+// break;
+// }
+// }
+//
+// dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
+// HAL_GPIO_WritePin(LED1_G_GPIO_Port, LED1_G_Pin, GPIO_PIN_SET);
+// tx_near_msg[TAGCONFIGSUCCESS_INDEX] =0;
+// para_update = 0;
+// flag_finalsend=0;
+// flag_rxon=1;
+// flag_getresponse=0;
+// start_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// recbase_num=0;
+// timeout=ceil((float)nearbase_num*SLOT_SCALE)+3;
+// end_count=start_count+(timeout<<5);
+// if(end_count>=32768)
+// {
+// end_count-=32768;
+// }
+// mainbase_dist=100000;
+// mainbase_lost_count++;
+// current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// while(current_count<end_count||current_count>end_count+15000)
+// {
+// current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
+// {
+// if(flag_finalsend)
+// {
+// dw_systime=dwt_readsystimestamphi32();
+// if(dw_systime>temp1&&dw_systime<temp2)
+// {
- dwt_forcetrxoff();
- flag_rxon=0;
- dwt_setdelayedtrxtime(final_tx_time);
- result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
- flag_finalsend=0;
- break;
- }
- }
- current_count=HAL_LPTIM_ReadCounter(&hlptim1);
- if(current_count>=end_count&¤t_count<end_count+15000)
- break;
- };
- if(status_reg==0xffffffff)
- {
- NVIC_SystemReset();
- }
- if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
- {
- dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
- frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK; //获得接收到的数据长度
- dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
- dwt_setrxtimeout(0);//DELAY_BETWEEN_TWO_FRAME_UUS*(nearbase_num+1-recbase_num)+10);//设定接收超时时间，0位没有超时时间
- dwt_rxenable(0);//打开接收
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)&&rx_buffer[GROUP_ID_IDX]==group_id) //判断接收到的数据是否是response数据
- { u16 rec_nearbaseid,rec_nearbasepos;
- poll_tx_ts = get_tx_timestamp_u64(); //获得POLL发送时间T1
- resp_rx_ts = get_rx_timestamp_u64(); //获得RESPONSE接收时间T4
- recbase_num++;
- memcpy(&rec_nearbaseid,&rx_buffer[ANCHOR_ID_IDX],2);
- if(last_nearbase_num==0)
- {
- get_newbase=1;
- nearbaseid_list[0]=rec_nearbaseid;
- nearbase_num=1;
- memcpy(&tx_near_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
- }
- if(rec_nearbaseid==nearbaseid_list[0])
- {
- //////////////////////////////////时间同步
- memcpy(&sync_timer,&rx_buffer[ANCTIMEMS],2);
- memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
- current_count=HAL_LPTIM_ReadCounter(&hlptim1);
- memcpy(&rec_tagslotpos,&rx_buffer[TAGSLOTPOS],2);
- tmp_time=tmp_time+450;
- if(tmp_time>999)
- {
- tmp_time-=999;
- sync_timer++;
- if(sync_timer>=1010)
- {sync_timer=0;}
- }
- ancsync_time=((sync_timer)*1000+tmp_time);
- SyncAncUpdate(rec_nearbaseid,ancsync_time,rec_tagslotpos);
- // TIM3->CNT=tmp_time;
-// if(tagslotpos>max_slotpos)
-// tagslotpos=tagslotpos%(max_slotpos+1);
-// tyncpoll_time=(tagslotpos-1)*slottime;
- ////////////////////////////
- rec_nearbasepos=0;
- exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
- memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
- nearbase_distlist[rec_nearbasepos]=temp_dist;
- if((rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
- motor_state=rx_buffer[MOTORSTATE_INDEX]&0xf;
- rec_remotepara_state=rx_buffer[MOTORSTATE_INDEX]>>4;
+// dwt_forcetrxoff();
+// flag_rxon=0;
+// dwt_setdelayedtrxtime(final_tx_time);
+// result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
+// flag_finalsend=0;
+// break;
+// }
+// }
+// current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// if(current_count>=end_count&¤t_count<end_count+15000)
+// break;
+// };
+// if(status_reg==0xffffffff)
+// {
+// NVIC_SystemReset();
+// }
+// if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
+// {
+// dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
+// frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK; //获得接收到的数据长度
+// dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
+// dwt_setrxtimeout(0);//DELAY_BETWEEN_TWO_FRAME_UUS*(nearbase_num+1-recbase_num)+10);//设定接收超时时间，0位没有超时时间
+// dwt_rxenable(0);//打开接收
+// if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)&&rx_buffer[GROUP_ID_IDX]==group_id) //判断接收到的数据是否是response数据
+// { u16 rec_nearbaseid,rec_nearbasepos;
+// poll_tx_ts = get_tx_timestamp_u64(); //获得POLL发送时间T1
+// resp_rx_ts = get_rx_timestamp_u64(); //获得RESPONSE接收时间T4
+// recbase_num++;
+// memcpy(&rec_nearbaseid,&rx_buffer[ANCHOR_ID_IDX],2);
+// if(last_nearbase_num==0)
+// {
+// get_newbase=1;
+// nearbaseid_list[0]=rec_nearbaseid;
+// nearbase_num=1;
+// memcpy(&tx_near_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
+// }
+// if(rec_nearbaseid==nearbaseid_list[0])
+// {
+// //////////////////////////////////时间同步
+// memcpy(&sync_timer,&rx_buffer[ANCTIMEMS],2);
+// memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
+// current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// memcpy(&rec_tagslotpos,&rx_buffer[TAGSLOTPOS],2);
+// tmp_time=tmp_time+450;
+// if(tmp_time>999)
+// {
+// tmp_time-=999;
+// sync_timer++;
+// if(sync_timer>=1010)
+// {sync_timer=0;}
+// }
+// ancsync_time=((sync_timer)*1000+tmp_time);
+// SyncAncUpdate(rec_nearbaseid,ancsync_time,rec_tagslotpos);
+// // TIM3->CNT=tmp_time;
+//// if(tagslotpos>max_slotpos)
+//// tagslotpos=tagslotpos%(max_slotpos+1);
+//// tyncpoll_time=(tagslotpos-1)*slottime;
+// ////////////////////////////
+// rec_nearbasepos=0;
+// exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
+// memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
+// nearbase_distlist[rec_nearbasepos]=temp_dist;
+// if((rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
+// motor_state=rx_buffer[MOTORSTATE_INDEX]&0xf;
+// rec_remotepara_state=rx_buffer[MOTORSTATE_INDEX]>>4;
- mainbase_lost_count=0;
- flag_finalsend=1;
- memcpy(&mainbase_dist,&rx_buffer[DIST_IDX],4);
- final_tx_time = (resp_rx_ts + ((RESP_RX_TO_FINAL_TX_DLY_UUS+DELAY_BETWEEN_TWO_FRAME_UUS*nearbase_num+500) * UUS_TO_DWT_TIME)) >> 8;
- temp1=final_tx_time-((850*UUS_TO_DWT_TIME)>>8);
- temp2=final_tx_time+((100*UUS_TO_DWT_TIME)>>8);
- // dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
- final_tx_ts = (((uint64_t)(final_tx_time & 0xFFFFFFFE)) << 8) + TX_ANT_DLY;//final包实际发送时间是计算时间加上发送天线delay
- final_msg_set_ts(&tx_near_msg[FINAL_MSG_POLL_TX_TS_IDX], poll_tx_ts);//将T1，T4，T5写入发送数据
- final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX], resp_rx_ts);
- final_msg_set_ts(&tx_near_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
- tx_near_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
- tx_near_msg[GROUP_ID_IDX] = group_id;
+// mainbase_lost_count=0;
+// flag_finalsend=1;
+// memcpy(&mainbase_dist,&rx_buffer[DIST_IDX],4);
+// final_tx_time = (resp_rx_ts + ((RESP_RX_TO_FINAL_TX_DLY_UUS+DELAY_BETWEEN_TWO_FRAME_UUS*nearbase_num+500) * UUS_TO_DWT_TIME)) >> 8;
+// temp1=final_tx_time-((850*UUS_TO_DWT_TIME)>>8);
+// temp2=final_tx_time+((100*UUS_TO_DWT_TIME)>>8);
+// // dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
+// final_tx_ts = (((uint64_t)(final_tx_time & 0xFFFFFFFE)) << 8) + TX_ANT_DLY;//final包实际发送时间是计算时间加上发送天线delay
+// final_msg_set_ts(&tx_near_msg[FINAL_MSG_POLL_TX_TS_IDX], poll_tx_ts);//将T1，T4，T5写入发送数据
+// final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX], resp_rx_ts);
+// final_msg_set_ts(&tx_near_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
+// tx_near_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
+// tx_near_msg[GROUP_ID_IDX] = group_id;
- dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
- dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
- flag_getresponse=1;
- memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
+// dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
+// dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
+// flag_getresponse=1;
+// memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
- //时间同步
- ancsync_time=((sync_timer)*1000+tmp_time);
- last_slotnum=current_slotnum;
- current_slotnum=((float)sync_timer/g_com_map[COM_INTERVAL])+1;
- if(current_slotnum==last_slotnum-1)
- {
- flag_getresponse=1;
- }
- lastsync_timer=sync_timer;
- offsettimeus=ancsync_time-current_count*LPTIMER_LSB+offset;
-// SetNextPollTime(tyncpoll_time);
- if(rec_remotepara_state==1)
- {
- memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],REMOTEPARA_LEN);
- memcpy(&g_com_map[COM_INTERVAL],&rec_remotepara[0],8);
- memcpy(&g_com_map[POWER],&rec_remotepara[8],10);
- if(g_com_map[COM_INTERVAL]>0&&g_com_map[COM_INTERVAL]<1000&&g_com_map[POWER]<67&&g_com_map[POWER]>0)
- { save_com_map_to_flash();
- delay_ms(100);
- }
- NVIC_SystemReset();
- }
- } else {
- memcpy(&sync_timer,&rx_buffer[ANCTIMEMS],2);
- memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
- current_count=HAL_LPTIM_ReadCounter(&hlptim1);
- memcpy(&rec_tagslotpos,&rx_buffer[TAGSLOTPOS],2);
- tmp_time=tmp_time+450;
- if(tmp_time>999)
- {
- tmp_time-=999;
- sync_timer++;
- if(sync_timer>=1010)
- {sync_timer=0;}
- }
- ancsync_time=((sync_timer)*1000+tmp_time);
- SyncAncUpdate(rec_nearbaseid,ancsync_time,rec_tagslotpos);
-
- rec_nearbasepos=FindNearBasePos(rec_nearbaseid);
- if(rec_nearbasepos>=last_nearbase_num) //发现新的基站
- {
- get_newbase=1;
- nearbase_num++;
- nearbaseid_list[rec_nearbasepos] = rec_nearbaseid;
- memcpy(&tx_near_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
- }
-
- exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
- memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
- nearbase_distlist[rec_nearbasepos]=temp_dist;
+// //时间同步
+// ancsync_time=((sync_timer)*1000+tmp_time);
+// last_slotnum=current_slotnum;
+// current_slotnum=((float)sync_timer/g_com_map[COM_INTERVAL])+1;
+// if(current_slotnum==last_slotnum-1)
+// {
+// flag_getresponse=1;
+// }
+// lastsync_timer=sync_timer;
+// offsettimeus=ancsync_time-current_count*LPTIMER_LSB+offset;
+//// SetNextPollTime(tyncpoll_time);
+// if(rec_remotepara_state==1)
+// {
+// memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],REMOTEPARA_LEN);
+// memcpy(&g_com_map[COM_INTERVAL],&rec_remotepara[0],8);
+// memcpy(&g_com_map[POWER],&rec_remotepara[8],10);
+// if(g_com_map[COM_INTERVAL]>0&&g_com_map[COM_INTERVAL]<1000&&g_com_map[POWER]<67&&g_com_map[POWER]>0)
+// { save_com_map_to_flash();
+// delay_ms(100);
+// }
+// NVIC_SystemReset();
+// }
+// } else {
+// memcpy(&sync_timer,&rx_buffer[ANCTIMEMS],2);
+// memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
+// current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+// memcpy(&rec_tagslotpos,&rx_buffer[TAGSLOTPOS],2);
+// tmp_time=tmp_time+450;
+// if(tmp_time>999)
+// {
+// tmp_time-=999;
+// sync_timer++;
+// if(sync_timer>=1010)
+// {sync_timer=0;}
+// }
+// ancsync_time=((sync_timer)*1000+tmp_time);
+// SyncAncUpdate(rec_nearbaseid,ancsync_time,rec_tagslotpos);
+//
+// rec_nearbasepos=FindNearBasePos(rec_nearbaseid);
+// if(rec_nearbasepos>=last_nearbase_num) //发现新的基站
+// {
+// get_newbase=1;
+// nearbase_num++;
+// nearbaseid_list[rec_nearbasepos] = rec_nearbaseid;
+// memcpy(&tx_near_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
+// }
+//
+// exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
+// memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
+// nearbase_distlist[rec_nearbasepos]=temp_dist;
- if(motor_state<(rx_buffer[MOTORSTATE_INDEX]&0xf)&&(rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
- {
- motor_state=rx_buffer[MOTORSTATE_INDEX];
- }
- final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);
- dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
- dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
+// if(motor_state<(rx_buffer[MOTORSTATE_INDEX]&0xf)&&(rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
+// {
+// motor_state=rx_buffer[MOTORSTATE_INDEX];
+// }
+// final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);
+// dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
+// dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
- //dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
- // result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
- //dwt_writetxdata(4,&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4], FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4);//将发送数据写入DW1000
- }
- }
- } else {
- dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
- if(flag_rxon)
- { dwt_rxenable(0);
- }
- }
- // dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
- }
- if(mainbase_lost_count>tag_frequency*BASELOST_STOPMOTOR_TIME)
- {
- motor_state=0;
- }
- dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
- nearbase_num=recbase_num;
- j=0;
- if(sync_anc_losttime!=0)
- {
- NextSlotDelayMs(0);
- }
- // tyncpoll_time=0;
- next_nearbase_num=0;
- for(i=0; i<last_nearbase_num+get_newbase; i++)
- {
- if(exsistbase_list[i]>0)
- {
- next_nearbase_num++;
- true_exsistbase_list[j]=exsistbase_list[i];
- true_nearbase_idlist[j]=nearbaseid_list[i];
- true_nearbase_distlist[j++]=nearbase_distlist[i];
- exsistbase_list[i]--;
- }
- }
+// //dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
+// // result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
+// //dwt_writetxdata(4,&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4], FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4);//将发送数据写入DW1000
+// }
+// }
+// } else {
+// dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
+// if(flag_rxon)
+// { dwt_rxenable(0);
+// }
+// }
+// // dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
+// }
+// if(mainbase_lost_count>tag_frequency*BASELOST_STOPMOTOR_TIME)
+// {
+// motor_state=0;
+// }
+// dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
+// nearbase_num=recbase_num;
+// j=0;
+// if(sync_anc_losttime!=0)
+// {
+// NextSlotDelayMs(0);
+// }
+// // tyncpoll_time=0;
+// next_nearbase_num=0;
+// for(i=0; i<last_nearbase_num+get_newbase; i++)
+// {
+// if(exsistbase_list[i]>0)
+// {
+// next_nearbase_num++;
+// true_exsistbase_list[j]=exsistbase_list[i];
+// true_nearbase_idlist[j]=nearbaseid_list[i];
+// true_nearbase_distlist[j++]=nearbase_distlist[i];
+// exsistbase_list[i]--;
+// }
+// }
- if(recbase_num<3)
- {
- next_nearbase_num=next_nearbase_num;
- }
- last_nearbase_num = next_nearbase_num;
- for(i=0; i<last_nearbase_num-1; i++)
- {
- for(j=0; j<last_nearbase_num-1; j++)
- {
- if(true_nearbase_distlist[j]>true_nearbase_distlist[j+1])
- {
- u32 temp_dist,temp_id,temp_exsis;
- temp_dist=true_nearbase_distlist[j];
- temp_id = true_nearbase_idlist[j];
- temp_exsis=true_exsistbase_list[i];
- true_nearbase_distlist[j]=true_nearbase_distlist[j+1];
- true_nearbase_idlist[j]=true_nearbase_idlist[j+1];
- true_exsistbase_list[j]=true_exsistbase_list[j+1];
+// if(recbase_num<3)
+// {
+// next_nearbase_num=next_nearbase_num;
+// }
+// last_nearbase_num = next_nearbase_num;
+// for(i=0; i<last_nearbase_num-1; i++)
+// {
+// for(j=0; j<last_nearbase_num-1; j++)
+// {
+// if(true_nearbase_distlist[j]>true_nearbase_distlist[j+1])
+// {
+// u32 temp_dist,temp_id,temp_exsis;
+// temp_dist=true_nearbase_distlist[j];
+// temp_id = true_nearbase_idlist[j];
+// temp_exsis=true_exsistbase_list[i];
+// true_nearbase_distlist[j]=true_nearbase_distlist[j+1];
+// true_nearbase_idlist[j]=true_nearbase_idlist[j+1];
+// true_exsistbase_list[j]=true_exsistbase_list[j+1];
- true_nearbase_distlist[j+1]=temp_dist;
- true_nearbase_idlist[j+1]=temp_id;
- true_exsistbase_list[j+1]=temp_exsis;
- }
- }
- }
+// true_nearbase_distlist[j+1]=temp_dist;
+// true_nearbase_idlist[j+1]=temp_id;
+// true_exsistbase_list[j+1]=temp_exsis;
+// }
+// }
+// }
- report_num=0;
- for (i=0; i<last_nearbase_num; i++)
- {
- nearbaseid_list[i]=true_nearbase_idlist[i];
- nearbase_distlist[i]=true_nearbase_distlist[i];
- if(nearbase_distlist[i]!=0x1ffff&&true_exsistbase_list[i]==KEEP_TIMES)
- {
- memcpy(&usart_send[4+6*report_num],&nearbaseid_list[i],2);
- memcpy(&usart_send[6+6*report_num],&nearbase_distlist[i],4);
- report_num++;
- }
- }
-#ifdef USART_INTEGRATE_OUTPUT
- usart_send[0] = 0x55;
- usart_send[1] = 0xAA;
- usart_send[2] = 4;//正常模式
- usart_send[3] = report_num*6+2;//正常模式
- checksum = Checksum_u16(&usart_send[2],report_num*6+2);
- memcpy(&usart_send[4+report_num*6],&checksum,2);
- USART_puts(usart_send,6+report_num*6);
-#endif
+// report_num=0;
+// for (i=0; i<last_nearbase_num; i++)
+// {
+// nearbaseid_list[i]=true_nearbase_idlist[i];
+// nearbase_distlist[i]=true_nearbase_distlist[i];
+// if(nearbase_distlist[i]!=0x1ffff&&true_exsistbase_list[i]==KEEP_TIMES)
+// {
+// memcpy(&usart_send[4+6*report_num],&nearbaseid_list[i],2);
+// memcpy(&usart_send[6+6*report_num],&nearbase_distlist[i],4);
+// report_num++;
+// }
+// }
+//#ifdef USART_INTEGRATE_OUTPUT
+// usart_send[0] = 0x55;
+// usart_send[1] = 0xAA;
+// usart_send[2] = 4;//正常模式
+// usart_send[3] = report_num*6+2;//正常模式
+// checksum = Checksum_u16(&usart_send[2],report_num*6+2);
+// memcpy(&usart_send[4+report_num*6],&checksum,2);
+// USART_puts(usart_send,6+report_num*6);
+//#endif
- for(i=0; i<MAX_NEARBASE_NUM; i++)
- {
- nearbase_distlist[i]=0x1ffff;
- }
- dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
- HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
- HAL_GPIO_WritePin(LED1_G_GPIO_Port, LED1_G_Pin, GPIO_PIN_RESET);
-}
-u8 nearmsg_mainbase=0,rec_tagpos_emptylist[32];
-void GetNearMsg(void)
-{
- u32 start_poll,frame_len;
- if(nearmsg_mainbase)
- { nearmsg_mainbase=0;
- } else {
- nearmsg_mainbase=1;
- }
- memcpy(&tx_near_msg[ANCHOR_ID_IDX],&nearmsg_mainbase,2);
- memcpy(&tx_near_msg[TAG_ID_IDX],&dev_id,2);
- tx_near_msg[GROUP_ID_IDX] = group_id;
- tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_MSG;
+// for(i=0; i<MAX_NEARBASE_NUM; i++)
+// {
+// nearbase_distlist[i]=0x1ffff;
+// }
+// dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
+// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
+// HAL_GPIO_WritePin(LED1_G_GPIO_Port, LED1_G_Pin, GPIO_PIN_RESET);
+//}
+//u8 nearmsg_mainbase=0,rec_tagpos_emptylist[32];
+//void GetNearMsg(void)
+//{
+// u32 start_poll,frame_len;
+// if(nearmsg_mainbase)
+// { nearmsg_mainbase=0;
+// } else {
+// nearmsg_mainbase=1;
+// }
+// memcpy(&tx_near_msg[ANCHOR_ID_IDX],&nearmsg_mainbase,2);
+// memcpy(&tx_near_msg[TAG_ID_IDX],&dev_id,2);
+// tx_near_msg[GROUP_ID_IDX] = group_id;
+// tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_MSG;
- dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
- dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);
- dwt_writetxdata(12, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
- dwt_writetxfctrl(12, 0);//设置超宽带发送数据长度
- dwt_starttx(DWT_START_TX_IMMEDIATE| DWT_RESPONSE_EXPECTED);
+// dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
+// dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);
+// dwt_writetxdata(12, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
+// dwt_writetxfctrl(12, 0);//设置超宽带发送数据长度
+// dwt_starttx(DWT_START_TX_IMMEDIATE| DWT_RESPONSE_EXPECTED);
- /* We assume that the transmission is achieved correctly, poll for reception of a frame or error/timeout. See NOTE 8 below. */
- while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
- {
- };
- if(status_reg==0xffffffff)
- {
- NVIC_SystemReset();
- }
- if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
- {
- dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
- frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK; //获得接收到的数据长度
- dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_MSG&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
- {
- nearbase_num=rx_buffer[NEARBASENUM_INDEX];
- memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
- tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
- //tagslotpos=rx_buffer[TAGSLOTPOS];
- memcpy(nearbaseid_list,&rx_buffer[NEARBASEID_INDEX],nearbase_num*2);
- //slottime=ceil((nearbase_num+2)*0.3)+1;
- tyncpoll_time=tagslotpos*slottime;
- tag_state=NEARPOLL;
- }
- } else {
- tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
- }
-}
+// /* We assume that the transmission is achieved correctly, poll for reception of a frame or error/timeout. See NOTE 8 below. */
+// while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
+// {
+// };
+// if(status_reg==0xffffffff)
+// {
+// NVIC_SystemReset();
+// }
+// if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
+// {
+// dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
+// frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK; //获得接收到的数据长度
+// dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
+// if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_MSG&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
+// {
+// nearbase_num=rx_buffer[NEARBASENUM_INDEX];
+// memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
+// tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
+// //tagslotpos=rx_buffer[TAGSLOTPOS];
+// memcpy(nearbaseid_list,&rx_buffer[NEARBASEID_INDEX],nearbase_num*2);
+// //slottime=ceil((nearbase_num+2)*0.3)+1;
+// tyncpoll_time=tagslotpos*slottime;
+// tag_state=NEARPOLL;
+// }
+// } else {
+// tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
+// }
+//}
u32 id;
void Tag_App(void)//发送模式(TAG标签)
{
@@ -772,7 +805,7 @@
break;
case GETNEARMSG:
- GetNearMsg();
+// GetNearMsg();
break;
case NEARPOLL:
--
Gitblit v1.9.3