From a687a12d6333fc0e31dfd019893d7e49a3000d69 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期日, 21 六月 2020 21:03:56 +0800
Subject: [PATCH] 1低功耗标签对5基站，测试完成
---
Src/main.c | 95 ++++++++++++++++++++++++++++++-----------------
1 files changed, 61 insertions(+), 34 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index cf15f62..2f8c0ba 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -38,7 +38,7 @@
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
#define DEBUG_MODE
-#define Period (uint32_t) 32768
+#define Period (uint32_t) 32768 - 1
#define Timeout (uint32_t) 32768 - 1//(32768 - 1)
/* USER CODE END PD */
@@ -77,13 +77,12 @@
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
uint32_t dev_id;
-extern uint8_t g_start_sync_flag;
uint16_t heartbeat_timer,poll_timer,sync_timer;
uint8_t aRxBuffer[1],group_id;
void IdleTask(void)
{
- g_start_sync_flag=0;
+
UART_CheckReceive();
UART_CheckSend();
@@ -139,9 +138,39 @@
uint16_t tyncpoll_time,lpsettime;
uint16_t slottime,max_slotpos;
-uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency;
+uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time,current_time;
extern uint8_t module_power;
uint8_t imu_enable,motor_enable;
+u16 GetLPTime(void)
+{
+ u16 count=HAL_LPTIM_ReadCounter(&hlptim1);
+ return count*LPTIMER_LSB/1000;
+}
+u16 total_slotnum,current_slotnum;
+extern int32_t offsettimeus;
+
+void SetNextPollTime(u16 time)
+{
+ int32_t lpcount,lptime,target_time;
+
+ time=0;
+ if(current_slotnum>=total_slotnum)
+ current_slotnum-=total_slotnum;
+
+ target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
+ //if(target_time<90000)
+ {
+ lptime=target_time-offsettimeus;
+ lpcount = lptime/LPTIMER_LSB;
+ if(lpcount>LPTIMER_1S_COUNT)
+ lpcount-=LPTIMER_1S_COUNT;
+ if(lpcount<0)
+ {
+ lpcount+=LPTIMER_1S_COUNT;
+ }
+ __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
+}
+}
void Program_Init(void)
{ float temp;
uint16_t temp2;
@@ -149,11 +178,11 @@
Usart1ParseDataCallback = UsartParseDataHandler;
parameter_init();
//deca_sleep(1000);
- g_com_map[VERSION] = 0x0107;
+ g_com_map[VERSION] = 0x0109;
#ifdef DEBUG_MODE
// g_com_map[DEV_ROLE]=1;
// g_com_map[DEV_ID]=1;
-// g_com_map[COM_INTERVAL]=1000;
+ g_com_map[COM_INTERVAL]=100;
// g_com_map[MAX_REPORT_ANC_NUM]=1;
g_com_map[NOMOVESLEEP_TIME]=10;
#endif
@@ -165,14 +194,15 @@
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
- slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*4/3);
+ slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]/4)+4;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
-
- slot_startcount=(float)(tyncpoll_time+10)*1000/LPTIMER_LSB;
- lastpoll_count=slot_startcount;
- interval_count=(float)g_com_map[COM_INTERVAL]*1000/LPTIMER_LSB;
+ slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
+ lastpoll_time=tyncpoll_time;
tag_frequency = 1000/g_com_map[COM_INTERVAL];
+ total_slotnum = 1000/g_com_map[COM_INTERVAL];
+ current_slotnum=1;
+ current_time=GetLPTime();
if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
@@ -200,7 +230,7 @@
uint32_t temp;
extern uint8_t sleep_flag,m_bEUARTTxEn;
uint16_t waitusart_timer;
-uint8_t bat_percent=0;
+uint8_t bat_percent=0,g_start_send_flag;
//void HAL_UART_RxCpltCallback(UART_HandleTypeDef *UartHandle)
//{
// /* Set transmission flag: trasfer complete*/
@@ -244,7 +274,7 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_LPTIM1_Init();
- MX_USART1_UART_Init();
+ // MX_USART1_UART_Init();
MX_SPI1_Init();
MX_ADC_Init();
MX_DMA_Init();
@@ -276,22 +306,24 @@
{ static uint16_t blink_count=0;
SystemClock_Config();
g_start_send_flag = 0;
+
// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
// {
// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
// }else{
// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
// }
+ LED_TR_BLINK;
bat_percent=Get_Battary();
if(bat_percent>15)
- { LED0_ON;
+ {// LED0_ON;
Tag_App();
- LED0_OFF;
+ // LED0_OFF;
}else{
- LED_LR_ON;
+ //LED_LR_ON;
Tag_App();
- LED_LR_OFF;
+ // LED_LR_OFF;
}
//LED0_BLINK;
IdleTask();
@@ -301,14 +333,14 @@
}
if(m_bEUARTTxEn==0&&waitusart_timer==0)
{
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ // HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
}
}else{
IdleTask();
}
- //HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
// HAL_Delay(100);
// Get_Battary();
@@ -452,10 +484,10 @@
Error_Handler();
}
/* USER CODE BEGIN LPTIM1_Init 2 */
- if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, Period, Timeout) != HAL_OK)
- {
- Error_Handler();
- }
+// if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, Period, Timeout) != HAL_OK)
+// {
+// Error_Handler();
+// }
/* USER CODE END LPTIM1_Init 2 */
}
@@ -574,7 +606,7 @@
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOA, DW_CTRL_Pin|SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
@@ -583,7 +615,7 @@
HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|LED2_G_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin : PA0 */
GPIO_InitStruct.Pin = GPIO_PIN_0;
@@ -605,7 +637,7 @@
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pin : SPI_CS_Pin */
- GPIO_InitStruct.Pin = SPI_CS_Pin;
+ GPIO_InitStruct.Pin = SPI_CS_Pin|GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@@ -688,17 +720,12 @@
static uint8_t i=0;
i++;
g_start_send_flag=1;
- lastpoll_count+=interval_count;
- if(lastpoll_count>LPTIMER_1S_COUNT-30)
- {
- lastpoll_count = slot_startcount;
- }
- __HAL_LPTIM_COMPARE_SET(&hlptim1, lastpoll_count);
-
+ current_slotnum++;
+ SetNextPollTime(tyncpoll_time);
nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&imu_enable)
{
- mcu_sleep();
+ // mcu_sleep();
}
}
/* USER CODE END 4 */
--
Gitblit v1.9.3