From a6a0759e70adbfaf9b2b090bd0c25541be8bb104 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期四, 05 六月 2025 14:07:55 +0800
Subject: [PATCH] 2.85，加入按下按键点击震动100ms 原来是10ms没感觉
---
Src/main.c | 210 ++++++++++++++++++++++++++++------------------------
1 files changed, 114 insertions(+), 96 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index a8965d3..05e3afd 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -101,7 +101,7 @@
}
void UsartInit(void)
{
- waitusart_timer = tag_frequency*USART_KEEPWAKE_TIME;
+// waitusart_timer = tag_frequency*USART_KEEPWAKE_TIME;
MX_DMA_Init();
MX_USART1_UART_Init();
if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
@@ -139,6 +139,7 @@
}else{
motor_state = 0;
}
+ //motor_state=2;
switch(motor_state)
{case 0:
if(hardware_type==NSH1)
@@ -184,6 +185,7 @@
break;
}
}
+ bat_percent=Get_Battary();
if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
nomove_count = 0;
@@ -192,7 +194,7 @@
state5v=1;
UsartInit();
}
- if(bat_percent>99)
+ if(HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
{
LED_LR_OFF;
LED_LG_ON;
@@ -252,42 +254,30 @@
#define FIXSLOTPOS 4
u16 slotpos_intoatl;
uint16_t bigslot_num;
-uint8_t fix_slotpos =FIXSLOTPOS;
-int32_t lpcount,lptime,target_time;
-extern u16 tagslotpos;
-void SetNextPollTime(u16 slotpos) //时间片逻辑：上来默认计算一个时间，时间同步之后，就近选择时间片。SetNextPollTime会调整下次发送
+
+
+
+void CommapErrorCheck(void)
{
-
-#ifdef FIXSLOT
- fix_slotpos =FIXSLOTPOS;
- //fix_slotpos = g_com_map[ALARM_DISTANCE1];
- slotpos = fix_slotpos;
- tagslotpos = fix_slotpos;
-#endif
-
- while(current_slotnum>=tag_frequency)
- { current_slotnum-=tag_frequency;}
- slotpos_intoatl = current_slotnum*bigslot_num+slotpos;
-
- if(current_slotnum==19)
- {slotpos_intoatl = current_slotnum*bigslot_num+slotpos;}
- target_time=(slotpos_intoatl*SLOTTIME_MS+100)*100;
-
- //if(target_time<90000)
+ if(g_com_map[COM_INTERVAL]==0||g_com_map[COM_INTERVAL]>1000)
{
- lptime=target_time-offsettimeus+1200;
- lpcount = lptime/LPTIMER_LSB;
- if(lpcount>LPTIMER_1S_COUNT)
- lpcount-=LPTIMER_1S_COUNT;
- if(lpcount<0)
- {
- lpcount+=LPTIMER_1S_COUNT;
+ g_com_map[COM_INTERVAL]=100;
}
- __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
+ if(g_com_map[IMU_THRES]>10)
+ {g_com_map[IMU_THRES]=2;}
+ if(g_com_map[POWER]>MAX_RFPOWER)
+ {g_com_map[POWER]=MAX_RFPOWER;}
+ if(g_com_map[POWER]<0)
+ {g_com_map[POWER]=0;}
+ if(g_com_map[STATIONARY_TIME]==0)
+ {
+ g_com_map[STATIONARY_TIME]=10;
+ }
+
}
-}
+uint8_t uwb_active_flag = 0;
u8 active_flag=0;
-
+u16 nomovesleep_time=0,interval;
void Program_Init(void)
{ float temp;
uint16_t temp2;
@@ -298,13 +288,14 @@
hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x0215;
-// g_com_map[DEV_ID]=0x11;
+ g_com_map[VERSION] = (2<<8)|85;
+
+// g_com_map[DEV_ID]=0x7;
#ifdef DEBUG_MODE
// g_com_map[DEV_ROLE]=1;
- g_com_map[DEV_ID]=0x4008;
- g_com_map[ACTIVE_INDEX]=1;
-// g_com_map[COM_INTERVAL]=100;
+ // g_com_map[DEV_ID]=0x4009;
+// g_com_map[ACTIVE_INDEX]=1;
+// g_com_map[COM_INTERVAL]=50;
// g_com_map[MAX_REPORT_ANC_NUM]=1;
// g_com_map[NOMOVESLEEP_TIME]=10;
// g_com_map[IMU_ENABLE]=0;
@@ -312,44 +303,43 @@
#endif
//g_com_map[NOMOVESLEEP_TIME]=10;
// g_com_map[IMU_ENABLE]=0;
-// g_com_map[COM_INTERVAL]=1000;
+// g_com_map[COM_INTERVAL]=50;
+ CommapErrorCheck();
active_flag = g_com_map[ACTIVE_INDEX];
- if(active_flag==0)
- { g_com_map[COM_INTERVAL]=1000;
- g_com_map[IMU_ENABLE]=1;
- g_com_map[NOMOVESLEEP_TIME]=10;
- g_com_map[MOTOR_ENABLE]=0;
- }
- if(g_com_map[COM_INTERVAL]==0)
- {
- g_com_map[COM_INTERVAL]=100;
- }
- if(g_com_map[IMU_THRES]>10)
- {g_com_map[IMU_THRES]=2;}
- if(g_com_map[POWER]>MAX_RFPOWER)
- {g_com_map[POWER]=MAX_RFPOWER;}
- if(g_com_map[POWER]<0)
- {g_com_map[POWER]=0;}
+
+//g_com_map[HEIGHTOFFEST_INDEX]=g_com_map[MAX_REPORT_ANC_NUM];
module_power = g_com_map[POWER];
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
-
+ uwb_active_flag = g_com_map[UWB_ACTIVE_FLAG_IDX];
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
//slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
- slottime = 5;
+ slottime = 5;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
lastpoll_time=tyncpoll_time;
- tag_frequency = 1000/g_com_map[COM_INTERVAL];
+
bigslot_num = TOTAL_SLOTNUM/tag_frequency;
current_slotnum=1;
current_time=GetLPTime();
+ nomovesleep_time = g_com_map[NOMOVESLEEP_TIME];
+ interval = g_com_map[COM_INTERVAL];
+ if(active_flag==0)
+ {
+ interval=1000;
+ imu_enable=1;
+ nomovesleep_time = 10;
+ motor_enable=0;
+ }
+ tag_frequency = 1000/interval;
if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
}
+ printf("设备ID: %x .\r\n",dev_id);
+ printf("固件版本:定位标签-串口输出-随机时间片模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
//g_com_map[NOMOVESLEEP_TIME]=5;
// printf("标签ID: %d .\r\n",dev_id);
// printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
@@ -376,23 +366,45 @@
void HardWareTypeDiffConfig(void)
{
-GPIO_InitTypeDef GPIO_InitStruct = {0};
-//hardware_type=2;
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(g_com_map[MOTORBEEPER_INDEX]!=1&&g_com_map[MOTORBEEPER_INDEX]!=2)
+ {
+ g_com_map[MOTORBEEPER_INDEX] = 2;
+ }
+ hardware_type = g_com_map[MOTORBEEPER_INDEX];
switch(hardware_type)
- {case 1:
-
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
- GPIO_InitStruct.Pin = MOTOR_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+ {
+ case 1:
+ HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
+ GPIO_InitStruct.Pin = MOTOR_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
break;
case 2:
MX_TIM2_Init();
- //BarInit();
break;
}
+}
+
+void DoubleClickProcess(void)
+{ char temp[50];
+ uint8_t len;
+if(uwb_active_flag)
+{
+ uwb_active_flag = 0;
+ HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
+ HAL_Delay(3000);
+ HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+}else{
+ uwb_active_flag = 1;
+ HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
+ HAL_Delay(1000);
+ HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+}
+ g_com_map[UWB_ACTIVE_FLAG_IDX]= uwb_active_flag;
+save_com_map_to_flash();
}
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
@@ -429,7 +441,7 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_LPTIM1_Init();
- MX_DMA_Init();
+ MX_DMA_Init();
MX_USART1_UART_Init();
MX_SPI1_Init();
MX_ADC_Init();
@@ -437,18 +449,21 @@
/* USER CODE BEGIN 2 */
LED_LG_ON;
Program_Init();
- LIS3DH_Data_Init();
+ Accelerometer_Init();
+ BarInit();
Dw1000_Init();
Dw1000_App_Init();
HardWareTypeDiffConfig();
dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- //dwt_entersleep();
- waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
+ dwt_entersleep();
+// waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
DW_DISABLE;
if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
{
Error_Handler();
}
+
+
// HAL_Delay(2000);
// mcu_sleep();
//LED0_BLINK;
@@ -467,9 +482,15 @@
// {
// MODBUS_Poll();
// }
- if(g_start_send_flag&&active_flag)
+if(m_bEUARTTxEn==0&&(motor_state==0||motor_state==3))
+ {
+#ifndef DEBUG_MODE
+ if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+#endif
+ }
+ if(g_start_send_flag&&active_flag/*&&uwb_active_flag*/)
{ static uint16_t blink_count=0;
- SystemClock_Config();
g_start_send_flag = 0;
// GetPressAndTemp();
// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
@@ -479,8 +500,7 @@
// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
// }
// LED_TR_BLINK;
-
- bat_percent=Get_Battary();
+ __disable_irq();
if(bat_percent>15)
{ LED_TB_ON;
Tag_App();
@@ -490,21 +510,14 @@
Tag_App();
LED_TR_OFF;
}
+ __enable_irq();
//LED0_BLINK;
IdleTask();
if(waitusart_timer>0)
{
waitusart_timer--;
}
- if(m_bEUARTTxEn==0&&waitusart_timer==0&&(motor_state==0||motor_state==3))
- {
-#ifndef DEBUG_MODE
- if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-#endif
- }
-
-
+
}else{
IdleTask();
}
@@ -933,6 +946,8 @@
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+
HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
HAL_PWR_DisableWakeUpPin(PWR_WAKEUP_PIN1);
/*Clear all related wakeup flags*/
@@ -945,19 +960,20 @@
extern u16 tagslotpos;
extern uint8_t tx_near_msg[80],stationary_flag,gotosleep_flag;
float key_keeptime;
-extern float motor_ontime;
+extern float motor_ontime,button_delay;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
static uint8_t i=0;
- i++;
-
+ SystemClock_Config();
g_start_send_flag=1;
- current_slotnum++;
- SetNextPollTime(tagslotpos);
- nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
+// current_slotnum++;
+// SetNextPollTime(tagslotpos);
+ if(button_delay<1)
+ button_delay+=1/(float)tag_frequency;
+ nomove_count+=1/(float)tag_frequency;
if(motor_keeptime>0)
{
- motor_keeptime-=(float)g_com_map[COM_INTERVAL]/1000;
+ motor_keeptime-=1/(float)tag_frequency;
}
if(motor_keeptime<0)
{motor_keeptime = 0;}
@@ -966,7 +982,7 @@
if(!GET_USERKEY)
{
LED_LG_ON;
- key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
+ key_keeptime+=1/(float)tag_frequency;
if(key_keeptime>3)
{
u8 i=250,keystate=1;
@@ -998,7 +1014,7 @@
if(!GET_USERKEY)
{
- key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
+ key_keeptime+=1/(float)tag_frequency;
if(key_keeptime>=KEY_KEEPRESET_TIME)
{
SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
@@ -1012,16 +1028,18 @@
}else{
stationary_flag = 0;
}
-if(nomove_count>=g_com_map[NOMOVESLEEP_TIME]-1&&imu_enable)
+if(nomove_count>=nomovesleep_time-1&&imu_enable)
{
gotosleep_flag=1;
}else{
gotosleep_flag=0;
}
+#ifndef DEBUG_MODE
if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&imu_enable)
{
mcu_sleep();
}
+#endif
}
/* USER CODE END 4 */
--
Gitblit v1.9.3