From ae42ba04bfca83ddca9df9d41061a365d4f57618 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期五, 26 一月 2024 17:08:05 +0800
Subject: [PATCH] 加入GPS模块。加入低功耗串口
---
Src/main.c | 950 +++++++++++++++++++++++++++++++++++++++-------------------
1 files changed, 635 insertions(+), 315 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 174b62c..8e2cf8e 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -30,10 +30,17 @@
#include "TrackingDiff.h"
#include "dw_app.h"
#include "Flash.h"
+#include "user.h"
+#include "sx126x-board.h"
+#include "string.h"
+#include "stdio.h"
+#include "delay.h"
+#include <stdlib.h>
#define NSH1 0x0001
#define GP 0x0002
#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
-//#define DEBUG_MODE
+#define DEBUG_MODE
+UART_WakeUpTypeDef Selection;
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -55,15 +62,18 @@
/* Private variables ---------------------------------------------------------*/
ADC_HandleTypeDef hadc;
+IWDG_HandleTypeDef hiwdg;
+
LPTIM_HandleTypeDef hlptim1;
+
+UART_HandleTypeDef hlpuart1;
+UART_HandleTypeDef huart1;
+DMA_HandleTypeDef hdma_usart1_rx;
+DMA_HandleTypeDef hdma_usart1_tx;
SPI_HandleTypeDef hspi1;
TIM_HandleTypeDef htim2;
-
-UART_HandleTypeDef huart1;
-DMA_HandleTypeDef hdma_usart1_rx;
-DMA_HandleTypeDef hdma_usart1_tx;
/* USER CODE BEGIN PV */
@@ -72,12 +82,14 @@
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
-static void MX_LPTIM1_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_SPI1_Init(void);
-void MX_ADC_Init(void);
+static void MX_ADC_Init(void);
static void MX_DMA_Init(void);
+static void MX_IWDG_Init(void);
static void MX_TIM2_Init(void);
+static void MX_LPUART1_UART_Init(void);
+static void MX_LPTIM1_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@@ -91,10 +103,15 @@
extern u8 motor_state;
uint16_t tyncpoll_time,lpsettime;
uint16_t slottime,max_slotpos;
-uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time,current_time;
+uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time;
extern uint8_t module_power;
extern float nomove_count;
uint8_t imu_enable,motor_enable;
+uint32_t lp_time;
+extern uint32_t lora_txtime_old;
+uint8_t anjian_flag;
+uint8_t stationary_flag;
+uint16_t stationary_num;
u16 GetLPTime(void)
{
u16 count=HAL_LPTIM_ReadCounter(&hlptim1);
@@ -110,15 +127,50 @@
Error_Handler();
}
}
+static void MX_DMA_DeInit(void)
+{
+
+ /* DMA controller clock enable */
+ __HAL_RCC_DMA1_CLK_DISABLE();
+
+ /* DMA interrupt init */
+ /* DMA1_Channel2_3_IRQn interrupt configuration */
+ // HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 1, 0);
+ HAL_NVIC_DisableIRQ(DMA1_Channel2_3_IRQn);
+
+}
+void UsartDeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ waitusart_timer = 0;
+ MX_DMA_DeInit();
+ HAL_UART_DeInit(&huart1);
+ GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
uint16_t hardware_version,hardware_pici,hardware_type;
-uint8_t state5v;
+uint8_t state5v = 1;
+extern uint8_t du_flag;
+extern uint8_t xie_flag;
float motor_keeptime;
void IdleTask(void)
-{u16 current_time;
-if(huart1.Instance->ISR&USART_ISR_FE)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
+{
+//if(huart1.Instance->ISR&USART_ISR_FE)
+// {
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+//// }
+// if(du_flag==1)
+// {
+// du_flag=0;
+//
+// }
+// if(xie_flag==1)
+// {
+// xie_flag=0;
+// memcpy((uint8_t*)&g_com_map + pack_index, mUsartReceivePack, pack_datalen);
+// }
if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
@@ -133,53 +185,25 @@
}
if(bat_percent>99)
{
- LED_LR_OFF;
- LED_LG_ON;
+ LED2_TR_OFF;
+ LED2_TB_ON;
}else{
- LED_LR_ON;
- LED_LG_OFF;
+ LED2_TR_ON;
+ LED2_TB_OFF;
}
}else{
- state5v=0;
- LED_LR_OFF;
- LED_LG_OFF;
+ if(state5v==1)
+ {
+ state5v=0;
+ UsartDeInit();
+ }
+ LED2_TR_OFF;
+ LED2_TB_OFF;
// }
}
- if(g_com_map[CNT_UPDATE]==1)
- {
- uint32_t result = 0;
- uint16_t tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 128);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- g_com_map[CNT_UPDATE]=0;
- save_com_map_to_flash();
- delay_ms(100);
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_REBOOT]==1)
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
{
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_RESTART]==1)
- {
- g_com_map[CNT_RESTART]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
}
@@ -187,11 +211,11 @@
u16 total_slotnum,current_slotnum;
extern int32_t offsettimeus;
-u16 last_lpcount = 0;
+//u16 last_lpcount = 0;
void SetNextPollTime(u16 time)
{
- int32_t lpcount,lptime,target_time;
-
+ int32_t lpcount1,lptime1,target_time1;
+int32_t last_lpcount1;
// if(current_slotnum>=total_slotnum)
// current_slotnum-=total_slotnum;
//
@@ -206,40 +230,64 @@
// {
// lpcount+=LPTIMER_1S_COUNT;
// }
- lpcount = last_lpcount+g_com_map[COM_INTERVAL]*32.768;
- while(lpcount>LPTIMER_1S_COUNT)
+ last_lpcount1=HAL_LPTIM_ReadCounter(&hlptim1);
+ lpcount1 = last_lpcount1+32.768*time;
+ while(lpcount1>LPTIMER_1S_COUNT)
{
- lpcount-=LPTIMER_1S_COUNT;
+ lpcount1-=LPTIMER_1S_COUNT;
}
- last_lpcount = lpcount;
- __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
+// last_lpcount = lpcount;
+ __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount1+32768);
}
-void HardWareTypeDiffConfig(void)
+/* 返回ch字符在sign数组中的序号 */
+int getIndexOfSigns(char ch)
{
-GPIO_InitTypeDef GPIO_InitStruct = {0};
-//hardware_type=2;
-if(hardware_type == 0)
- hardware_type = 1;
- switch(hardware_type)
- {
- case 1:
-
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
- GPIO_InitStruct.Pin = MOTOR_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- break;
- case 2:
- MX_TIM2_Init();
- //BarInit();
- break;
- }
+ if(ch >= '0' && ch <= '9')
+ {
+ return ch - '0';
+ }
+ if(ch >= 'A' && ch <='F')
+ {
+ return ch - 'A' + 10;
+ }
+ if(ch >= 'a' && ch <= 'f')
+ {
+ return ch - 'a' + 10;
+ }
+ return -1;
}
+/* 十六进制数转换为十进制数 */
+long hexToDec(char *source)
+{
+ long sum = 0;
+ long t = 1;
+ int i, len;
+
+ len = strlen(source);
+ for(i=len-1; i>=0; i--)
+ {
+ sum += t * getIndexOfSigns(*(source + i));
+ t *= 16;
+ }
+
+ return sum;
+}
+
+u32 Loratx_frequency;
u8 active_flag,nomovesleeptime;
+void GetLoratx_frequency(void)
+{
+Loratx_frequency=470000000;
+srand(HAL_LPTIM_ReadCounter(&hlptim1));
+ Loratx_frequency=((rand()%5)+470)*1000000;
+ if(470000000<=Loratx_frequency&&Loratx_frequency<480000000)
+ g_com_map[NEARBASE_ID1]=1136+(Loratx_frequency/1000000-470);
+ if(480000000<=Loratx_frequency&&Loratx_frequency<490000000)
+ g_com_map[NEARBASE_ID1]=1152+(Loratx_frequency/1000000-480);
+Loratx_frequency=470000000;
+}
void Program_Init(void)
{ float temp;
uint16_t temp2;
@@ -250,12 +298,25 @@
hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = (1<<8)|40;
+ g_com_map[VERSION] = (1<<8)|0;
+// g_com_map[DEV_ID]=1158;
+ #ifdef DEBUG_MODE
+ // g_com_map[GROUP_ID]=21;
+// g_com_map[DEV_ID]=4;
+ // g_com_map[COM_INTERVAL]=100;
+ // g_com_map[MAX_REPORT_ANC_NUM]=1;
+ // g_com_map[NOMOVESLEEP_TIME]=10;
+ #endif
+ g_com_map[GROUP_ID]=5;
+// g_com_map[COM_INTERVAL] = 1000;
+ if(g_com_map[COM_INTERVAL]<1000)
+ {g_com_map[COM_INTERVAL] = 1000;}
active_flag = g_com_map[ACTIVE_INDEX];
module_power = g_com_map[POWER];
+ g_com_map[IMU_ENABLE] = 0;
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
-
+
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
@@ -271,17 +332,11 @@
imu_enable=1;
nomovesleeptime =10;
}
-#ifdef DEBUG_MODE
-// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=1;
-// g_com_map[COM_INTERVAL]=100;
-// g_com_map[MAX_REPORT_ANC_NUM]=1;
-// g_com_map[NOMOVESLEEP_TIME]=10;
-#endif
+
// g_com_map[COM_INTERVAL]=100;
if(g_com_map[COM_INTERVAL]==0)
{
- g_com_map[COM_INTERVAL]=100;
+ g_com_map[COM_INTERVAL]=1000;
}
if(module_power>67)
{module_power=67;}
@@ -289,17 +344,15 @@
{module_power=0;}
current_slotnum=1;
- current_time=GetLPTime();
- if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
+// current_time=GetLPTime();
+ if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, 32767) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
}
+
//g_com_map[NOMOVESLEEP_TIME]=5;
- printf("标签ID: %d .\r\n",dev_id);
- printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
- printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
-
-
+ printf("固件版本: 免布线基站LORA版本 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -328,12 +381,6 @@
{
//SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
-/* USER CODE END 0 */
-
-/**
- * @brief The application entry point.
- * @retval int
- */
uint16_t temp2;
float dw_vbat,last_vbat;
uint8_t Get_Battary_UWB(void)
@@ -367,6 +414,200 @@
}
return last_value;
}
+void MX_ADC_DeInit(void)
+{
+ HAL_ADC_DeInit(&hadc);
+ HAL_ADCEx_DisableVREFINT();
+}
+uint16_t irq_num;
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ if(GPIO_Pin == GPIO_PIN_3)
+ {
+ SystemClock_Config();
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_SET);
+// HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_RESET); //片选lora有效
+// l_bIsVibration = HIDO_TRUE;
+// nomove_time=0;
+// printf("RXD :77777\r\n");
+ irq_num++;
+ RadioIrqProcess();
+ }
+ if(GPIO_Pin == GPIO_PIN_1)//按键
+ {
+ anjian_flag=1;
+ }
+ if(GPIO_Pin == GPIO_PIN_0)//加速度
+ {
+ stationary_flag =0;
+ stationary_num=0;
+ }
+}
+extern void Lora_tx_zubao( void );
+extern void Lora_tx_mode( void );
+extern uint8_t Lora_tx_ancnum;
+extern u8 lora_seq_nb2;
+extern uint16_t lora_yingda_num;
+uint8_t lora_tx_flag;
+uint8_t lora_txanchor_power_flag;
+extern uint16_t Lora_tx_ancid[50];
+extern uint16_t Lora_tx_ancdist[50];
+extern uint8_t Lora_tx_anc_electricity[50];
+u8 lora_seq_nb1;
+static uint8_t send_frame1[EUART_RX_BUF_SIZE];
+uint8_t data_length1;
+void LoraSendComMap(uint8_t data_length, uint8_t index)
+{
+ uint16_t checksum = 0;
+ send_frame1[0] = 0x55;
+ send_frame1[1] = 0xAA;
+ send_frame1[2] = 0x39;
+ send_frame1[3] = data_length+5;
+ send_frame1[4] = 3;
+ send_frame1[5] = index;
+ send_frame1[6] = data_length;
+ memcpy(&send_frame1[7], &g_com_map[index], data_length);
+ for(int i = 0; i<(data_length+5); i++)
+ {
+ checksum += send_frame1[2+i];
+ }
+ checksum = Checksum_u16(&send_frame1[2],5+data_length);
+ memcpy(&send_frame1[7+data_length],&checksum,2);
+ data_length1=data_length+9;
+// UART_PushFrame(send_frame1, data_length+9);
+}
+uint8_t no_yingdaflag;
+void Lora_Tx_Poll()
+{
+
+ if(lora_tx_flag)
+ {
+ lora_tx_flag=0;
+ if(du_flag==1)
+ {
+ Lora47X_Init();
+ du_flag=0;
+ Radio.Send( send_frame1, data_length1);
+ no_yingdaflag=1;
+ }
+ else
+ {
+ Lora47X_Init();
+ if(bat_percent>20)
+ {LED_TR_ON;}
+ else
+ {LED_TB_ON;}
+
+ lora_seq_nb2++;
+ Lora_tx_zubao();
+// Lora_tx_mode();
+// if(usart_send[2]==0x99)
+// {LED_TB_ON;}
+ Radio.Send( usart_send, 15+Lora_tx_ancnum*4);
+ Lora_tx_ancnum=0;
+ memset(Lora_tx_ancdist,0,sizeof(Lora_tx_ancdist));
+ memset(Lora_tx_ancid,0,sizeof(Lora_tx_ancid));
+ anjian_flag=0;
+ }
+ }
+
+}
+void MX_ADC1_Init()
+{
+MX_ADC_Init();
+}
+extern uint16_t Lora_rece_error;
+extern uint16_t Beepchixutime;
+void Beep_Off()
+{
+ __HAL_TIM_SET_COMPARE(&htim2, TIM_CHANNEL_4, 0);
+ HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_4);
+ HAL_TIM_Base_Stop_IT(&htim2);
+}
+void Beep_On()
+{
+ HAL_TIM_Base_Start_IT(&htim2);
+ HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_4);
+ __HAL_TIM_SET_COMPARE(&htim2, TIM_CHANNEL_4, 60);
+}
+#define BleRxBufferSize 1
+uint8_t aRxBuffer[1],group_id,BleRxBuffer[BleRxBufferSize];
+uint8_t ble_rx_success_flag;
+uint8_t fangzhijinrushuimian_flag;
+uint8_t ble_rxzhongzhuandate[1024];
+uint8_t ble_zhongzhuannum;
+uint8_t ble_rxdate[50]={1,2,3,4,5,6,7,8,9};
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+
+ {
+ ble_rxzhongzhuandate[ble_zhongzhuannum]=BleRxBuffer[0];
+ ble_zhongzhuannum++;
+// if(ble_rxzhongzhuandate[ble_zhongzhuannum-1]==0x0A&&ble_rxzhongzhuandate[ble_zhongzhuannum-2]==0x0D)
+// {
+//// HAL_UART_Transmit(&hlpuart1,ble_rxdate,5,1000);
+// ble_zhongzhuannum=0;
+// memcpy(ble_rxdate,ble_rxzhongzhuandate,50);
+// memset(ble_rxzhongzhuandate,0,sizeof(ble_rxzhongzhuandate));
+// fangzhijinrushuimian_flag=0;
+// ble_rx_success_flag=1;
+// }
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)BleRxBuffer, 1);
+ }
+}
+uint8_t ble_rxdate111[3]={0x11,0x22,0x33};
+void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart)
+{
+ SystemClock_Config();
+// HAL_UART_Transmit(&hlpuart1,(uint8_t*)ble_rxdate111,3,1000);
+//// huart->RxState = HAL_UART_STATE_BUSY_RX;
+// ble_rxzhongzhuandate[ble_zhongzhuannum]=BleRxBuffer[0];
+// ble_zhongzhuannum++;
+// if(ble_rxzhongzhuandate[ble_zhongzhuannum-1]==0x0A&&ble_rxzhongzhuandate[ble_zhongzhuannum-2]==0x0D)
+// {
+// ble_zhongzhuannum=0;
+// memcpy(ble_rxdate,ble_rxzhongzhuandate,50);
+// memset(ble_rxzhongzhuandate,0,sizeof(ble_rxzhongzhuandate));
+// }
+// if(lp_time>3)
+ fangzhijinrushuimian_flag=1;
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)BleRxBuffer, 1);
+// HAL_UART_Transmit(&hlpuart1,ble_rxdate,2,1000);
+}
+void Ble_rx_Poll()
+{
+ if(ble_rx_success_flag)
+ {
+ ble_rx_success_flag=0;
+// if(ble_rxdate[0]==0x55&&ble_rxdate[1]==0xAA&&ble_rxdate[5]==0x0D&&ble_rxdate[6]==0x0A)
+// {
+// if(ble_rxdate[2]==0x01)
+// {
+// memcpy(&g_com_map[NEARBASE_ID1],&ble_rxdate[3],2);
+// save_com_map_to_flash();
+// delay_ms(100);
+//// NVIC_SystemReset();
+// }
+// if(ble_rxdate[3]==0x02)
+// {
+// memcpy(&g_com_map[NEARBASE_ID2],&ble_rxdate[4],2);
+// save_com_map_to_flash();
+// delay_ms(100);
+//// NVIC_SystemReset();
+// }
+
+//
+// }
+// HAL_UART_Transmit(&hlpuart1,ble_rxdate,10,1000);
+// memset(ble_rxdate,0,sizeof(ble_rxdate));
+ }
+}
+/* USER CODE END 0 */
+
+/**
+ * @brief The application entry point.
+ * @retval int
+ */
int main(void)
{
/* USER CODE BEGIN 1 */
@@ -391,32 +632,50 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
- MX_LPTIM1_Init();
- MX_DMA_Init();
MX_USART1_UART_Init();
MX_SPI1_Init();
- // MX_ADC_Init();
-
-// MX_TIM2_Init();
+ MX_ADC_Init();
+ MX_DMA_Init();
+// MX_IWDG_Init();
+ MX_TIM2_Init();
+ MX_LPUART1_UART_Init();
+ MX_LPTIM1_Init();
/* USER CODE BEGIN 2 */
- LED_LG_ON;
- Program_Init();
-// LIS3DH_Data_Init();
- Dw1000_Init();
- Dw1000_App_Init();
-// HardWareTypeDiffConfig();
- dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- dwt_entersleep();
- DW_DISABLE;
- if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
- {
- Error_Handler();
- }
- HAL_Delay(2000);
+// LED_LG_ON;
+ Program_Init();
+ LIS3DH_Data_Init();
+// Uwb_Lora_Switch(1,0);
+ Dw1000_Init();
+ Dw1000_App_Init();
+ Delay_Ms(10);
+// Uwb_Lora_Switch(0,0);
+ // HardWareTypeDiffConfig();
+ dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
+ dwt_entersleep();
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+ Delay_Ms(2);
+ Delay_Ms(10);
+// Uwb_Lora_Switch(0,0);
+// printf("RXD :66666\r\n");
+ usart_send[0]=0x55;
+ usart_send[1]=0xaa;
+ bat_percent=Get_VDDVlotage();
+ GetLoratx_frequency();
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)BleRxBuffer, 1);
+// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_SET); //开GPS电源
+// Lora47X_Init();
// mcu_sleep();
//LED0_BLINK;
// SystemPower_Config();
//HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_SET);
+// Lora47X_Init();
+// Radio.Sleep();
+// lora_tx_flag=1;
+// Lora_Tx_Poll();
/* USER CODE END 2 */
/* Infinite loop */
@@ -426,52 +685,31 @@
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
- if(g_start_send_flag&&active_flag)
- { static uint16_t blink_count=0;
- SystemClock_Config();
- g_start_send_flag = 0;
-
-// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
-// {
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
-// }else{
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
-// }
-// LED_TR_BLINK;s
-
-
- if(bat_percent>15)
- { LED_TB_ON;
- Tag_App();
- LED_TB_OFF;
- }else{
- LED_TR_ON;
- Tag_App();
- LED_TR_OFF;
- }
- //LED0_BLINK;
- IdleTask();
- if(waitusart_timer>0)
- {
- waitusart_timer--;
- }
- if(m_bEUARTTxEn==0&&waitusart_timer==0)
- {
-#ifndef DEBUG_MODE
-if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-#endif
- }
-
-
- }else{
- IdleTask();
- }
+//Lora_rx_open();
+// Lora_Tx_Poll();
+ Lora_Tx_Poll();
+// Ble_rx_Poll();
+// HAL_IWDG_Refresh(&hiwdg);
+ IdleTask();
+// Lora_rece_error=0;
+// Radio.IrqProcess( ); // Process Radio IRQ
+// Anchor_App();
-// HAL_Delay(100);
- // Get_Battary();
-
- // LIS3DH_Data_Init();
+ #ifndef DEBUG_MODE
+ if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ {
+// if(fangzhijinrushuimian_flag==0)
+ {
+// Selection.WakeUpEvent = UART_WAKEUP_ON_STARTBIT;
+// HAL_UARTEx_EnableClockStopMode(&hlpuart1);
+// HAL_UARTEx_EnableStopMode( &hlpuart1 );
+// HAL_UARTEx_StopModeWakeUpSourceConfig( &hlpuart1, Selection );
+// __HAL_UART_ENABLE_IT(&hlpuart1, UART_IT_WUF);
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ }
+ }
+ #endif
+
}
/* USER CODE END 3 */
}
@@ -495,10 +733,12 @@
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
/** Initializes the CPU, AHB and APB busses clocks
*/
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI
+ |RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
@@ -520,8 +760,10 @@
{
Error_Handler();
}
- PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_LPTIM1;
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_LPUART1
+ |RCC_PERIPHCLK_LPTIM1;
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
+ PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_LSE;
PeriphClkInit.LptimClockSelection = RCC_LPTIM1CLKSOURCE_LSE;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -535,12 +777,7 @@
* @param None
* @retval None
*/
-void MX_ADC_DeInit(void)
-{
- HAL_ADC_DeInit(&hadc);
- HAL_ADCEx_DisableVREFINT();
-}
-void MX_ADC_Init(void)
+static void MX_ADC_Init(void)
{
/* USER CODE BEGIN ADC_Init 0 */
@@ -558,7 +795,7 @@
hadc.Init.OversamplingMode = DISABLE;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
- hadc.Init.SamplingTime = ADC_SAMPLETIME_160CYCLES_5;
+ hadc.Init.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.ContinuousConvMode = DISABLE;
@@ -591,6 +828,35 @@
}
/**
+ * @brief IWDG Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_IWDG_Init(void)
+{
+
+ /* USER CODE BEGIN IWDG_Init 0 */
+
+ /* USER CODE END IWDG_Init 0 */
+
+ /* USER CODE BEGIN IWDG_Init 1 */
+
+ /* USER CODE END IWDG_Init 1 */
+ hiwdg.Instance = IWDG;
+ hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
+ hiwdg.Init.Window = 4095;
+ hiwdg.Init.Reload = 4095;
+ if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN IWDG_Init 2 */
+
+ /* USER CODE END IWDG_Init 2 */
+
+}
+
+/**
* @brief LPTIM1 Initialization Function
* @param None
* @retval None
@@ -617,11 +883,89 @@
Error_Handler();
}
/* USER CODE BEGIN LPTIM1_Init 2 */
-// if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, Period, Timeout) != HAL_OK)
+
+ /* USER CODE END LPTIM1_Init 2 */
+
+}
+
+/**
+ * @brief LPUART1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_LPUART1_UART_Init(void)
+{
+
+ /* USER CODE BEGIN LPUART1_Init 0 */
+
+ /* USER CODE END LPUART1_Init 0 */
+
+ /* USER CODE BEGIN LPUART1_Init 1 */
+
+ /* USER CODE END LPUART1_Init 1 */
+ hlpuart1.Instance = LPUART1;
+ hlpuart1.Init.BaudRate = 9600;
+ hlpuart1.Init.WordLength = UART_WORDLENGTH_8B;
+ hlpuart1.Init.StopBits = UART_STOPBITS_1;
+ hlpuart1.Init.Parity = UART_PARITY_NONE;
+ hlpuart1.Init.Mode = UART_MODE_TX_RX;
+ hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ if (HAL_UART_Init(&hlpuart1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN LPUART1_Init 2 */
+
+ /* USER CODE END LPUART1_Init 2 */
+
+}
+
+/**
+ * @brief USART1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_USART1_UART_Init(void)
+{
+
+ /* USER CODE BEGIN USART1_Init 0 */
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ /* USER CODE END USART1_Init 0 */
+
+ /* USER CODE BEGIN USART1_Init 1 */
+
+ /* USER CODE END USART1_Init 1 */
+ huart1.Instance = USART1;
+ huart1.Init.BaudRate = 115200;
+ huart1.Init.WordLength = UART_WORDLENGTH_8B;
+ huart1.Init.StopBits = UART_STOPBITS_1;
+ huart1.Init.Parity = UART_PARITY_NONE;
+ huart1.Init.Mode = UART_MODE_TX_RX;
+ huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+ huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT|UART_ADVFEATURE_DMADISABLEONERROR_INIT;
+ huart1.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
+ huart1.AdvancedInit.DMADisableonRxError = UART_ADVFEATURE_DMA_DISABLEONRXERROR;
+ if (HAL_UART_Init(&huart1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN USART1_Init 2 */
+ GPIO_InitStruct.Pin = GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF4_USART1;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+// if(HAL_UART_Receive_IT(&huart1, (uint8_t *)aRxBuffer, 1) != HAL_OK)
// {
// Error_Handler();
// }
- /* USER CODE END LPTIM1_Init 2 */
+ Usart1InitVariables();
+ /* USER CODE END USART1_Init 2 */
}
@@ -675,7 +1019,6 @@
/* USER CODE END TIM2_Init 0 */
- TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
TIM_OC_InitTypeDef sConfigOC = {0};
@@ -683,20 +1026,11 @@
/* USER CODE END TIM2_Init 1 */
htim2.Instance = TIM2;
- htim2.Init.Prescaler = 9;
+ htim2.Init.Prescaler = 32-1;
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
- htim2.Init.Period = 1171;
+ htim2.Init.Period = 250-1;
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
- if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
- {
- Error_Handler();
- }
if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
{
Error_Handler();
@@ -708,68 +1042,17 @@
Error_Handler();
}
sConfigOC.OCMode = TIM_OCMODE_PWM1;
- sConfigOC.Pulse = 599;
+ sConfigOC.Pulse = 0;
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
- if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+ if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM2_Init 2 */
-//if(HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3) != HAL_OK)
-// {
-// /* Starting Error */
-// Error_Handler();
-// }
+
/* USER CODE END TIM2_Init 2 */
HAL_TIM_MspPostInit(&htim2);
-
-}
-
-/**
- * @brief USART1 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_USART1_UART_Init(void)
-{
-
- /* USER CODE BEGIN USART1_Init 0 */
- GPIO_InitTypeDef GPIO_InitStruct = {0};
- /* USER CODE END USART1_Init 0 */
-
- /* USER CODE BEGIN USART1_Init 1 */
-
- /* USER CODE END USART1_Init 1 */
- huart1.Instance = USART1;
- huart1.Init.BaudRate = 115200;
- huart1.Init.WordLength = UART_WORDLENGTH_8B;
- huart1.Init.StopBits = UART_STOPBITS_1;
- huart1.Init.Parity = UART_PARITY_NONE;
- huart1.Init.Mode = UART_MODE_TX_RX;
- huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
- huart1.Init.OverSampling = UART_OVERSAMPLING_16;
- huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
- huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT|UART_ADVFEATURE_DMADISABLEONERROR_INIT;
- huart1.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
- huart1.AdvancedInit.DMADisableonRxError = UART_ADVFEATURE_DMA_DISABLEONRXERROR;
- if (HAL_UART_Init(&huart1) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN USART1_Init 2 */
- GPIO_InitStruct.Pin = GPIO_PIN_10;
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Pull = GPIO_PULLUP;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.Alternate = GPIO_AF4_USART1;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-// if(HAL_UART_Receive_IT(&huart1, (uint8_t *)aRxBuffer, 1) != HAL_OK)
-// {
-// Error_Handler();
-// }
- Usart1InitVariables();
- /* USER CODE END USART1_Init 2 */
}
@@ -805,28 +1088,29 @@
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2|GPIO_PIN_8, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(SPI_CS_GPIO_Port, SPI_CS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|SDA_Pin|SCL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|GPIO_PIN_14|RADIO_nRESET_Pin
+ |RADIO_NSS_Pin|GPIO_PIN_7, GPIO_PIN_RESET);
- /*Configure GPIO pin : PA0 */
- GPIO_InitStruct.Pin = GPIO_PIN_0;
+ /*Configure GPIO pins : PA0 PA15 */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- /*Configure GPIO pins : SCL_Pin SDA_Pin */
- GPIO_InitStruct.Pin = SCL_Pin|SDA_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
+ /*Configure GPIO pins : PA2 PA8 */
+ GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_8;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pin : SPI_CS_Pin */
@@ -849,35 +1133,46 @@
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(USER_KEY_GPIO_Port, &GPIO_InitStruct);
+ /*Configure GPIO pin : RADIO_BUSY_Pin */
+ GPIO_InitStruct.Pin = RADIO_BUSY_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_BUSY_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin PB14 RADIO_nRESET_Pin
+ RADIO_NSS_Pin PB7 */
+ GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|GPIO_PIN_14|RADIO_nRESET_Pin
+ |RADIO_NSS_Pin|GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : RADIO_DIO1_Pin */
+ GPIO_InitStruct.Pin = RADIO_DIO1_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_DIO1_GPIO_Port, &GPIO_InitStruct);
+
/*Configure GPIO pin : INPUT_5V_Pin */
GPIO_InitStruct.Pin = INPUT_5V_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
- /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin LED2_R_Pin PWR_CTL_Pin */
- GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|PWR_CTL_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ /*Configure GPIO pins : SDA_Pin SCL_Pin */
+ GPIO_InitStruct.Pin = SDA_Pin|SCL_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- /*Configure GPIO pins : DW_WKUP_Pin DW_CTRL_Pin LED2_G_Pin */
- GPIO_InitStruct.Pin = DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /*Configure GPIO pin : PWR_ON_Pin */
- GPIO_InitStruct.Pin = PWR_ON_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = GPIO_PULLUP;
- HAL_GPIO_Init(PWR_ON_GPIO_Port, &GPIO_InitStruct);
-
/* EXTI interrupt init*/
- HAL_NVIC_SetPriority(EXTI0_1_IRQn, 1, 0);
+ HAL_NVIC_SetPriority(EXTI0_1_IRQn, 2, 0);
HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);
+
+ HAL_NVIC_SetPriority(EXTI2_3_IRQn, 1, 0);
+ HAL_NVIC_EnableIRQ(EXTI2_3_IRQn);
}
@@ -906,48 +1201,73 @@
/*Enter the Standby mode*/
HAL_PWR_EnterSTANDBYMode();
}
-extern uint8_t tx_near_msg[80],stationary_flag;
+extern uint8_t tx_near_msg[80];
float key_keeptime;
+extern float freqlost_count,range_lost_time;
+extern uint8_t lora_yingda_flag;
+uint8_t lora_yingdatime;
+extern uint8_t lora_chongfuyingda_flag;
+uint16_t no_data_chongqi_num;
+uint16_t anchor_send_num;
+uint8_t no_yingdatime;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
- static uint8_t i=0;
- i++;
- g_start_send_flag=1;
- current_slotnum++;
- SetNextPollTime(tyncpoll_time);
- nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
- if(motor_keeptime>0)
- {
- motor_keeptime-=(float)g_com_map[COM_INTERVAL]/1000;
- }
- if(!GET_USERKEY)
- {
- key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
- if(key_keeptime>=KEY_KEEPRESET_TIME)
- {
- g_com_map[ACTIVE_INDEX]=!active_flag;
- save_com_map_to_flash();
- MOTOR_ON;
- HAL_Delay(2000);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
- }
- }else{
- key_keeptime=0;
- }
-// if(nomove_count>STATIONARY_TIME)
-// {
-// stationary_flag = 1;
-// }else{
-// stationary_flag = 0;
-// }
-//if(nomove_count>=nomovesleeptime-1&&imu_enable)
-// {
-// tx_near_msg[TAGSTATE] = tx_near_msg[TAGSTATE]|GOINGSLEEPBIT;
-// }
-// if(nomove_count>nomovesleeptime&&imu_enable)
-// {
-// mcu_sleep();
-// }
+// uint8_t pinlv;
+ SystemClock_Config();
+ lp_time++;
+ anchor_send_num++;
+ no_data_chongqi_num++;
+ stationary_num++;
+ if(Beepchixutime>0)
+ {
+ Beepchixutime--;
+ if(Beepchixutime==0)
+ {Beep_Off();}
+ }
+ if(no_yingdaflag==1)
+ {
+ no_yingdatime++;
+ if(no_yingdatime>=5)
+ {
+ no_yingdaflag=0;
+ no_yingdatime=0;
+ }
+ }
+
+ if( no_data_chongqi_num>600)
+ {NVIC_SystemReset();}
+ SetNextPollTime(0);
+// if(lora_yingda_flag)
+// {
+// lora_yingdatime++;
+// if(lora_yingdatime>=2)
+// {lora_yingdatime=0;
+// lora_yingda_flag=0;
+// Lora_tx_mode();
+// Radio.Send( usart_send, 2);
+// }
+// }
+// else
+// {
+// pinlv=g_com_map[COM_MAP_SIZE]/1000;
+ if(lp_time%(g_com_map[COM_INTERVAL]/1000)==0)
+ {
+ lora_tx_flag=1;
+ lora_txanchor_power_flag=0;
+// }
+ if(anchor_send_num>=3600)
+ {anchor_send_num=0;
+ lora_txanchor_power_flag=1;
+ lora_tx_flag=0;
+ bat_percent=Get_VDDVlotage();
+ }
+ }
+
+ if(stationary_num>=10)
+ {stationary_num=0;
+ stationary_flag=1;
+ }
+
}
/* USER CODE END 4 */
--
Gitblit v1.9.3