From af35b1489e3a2a1a83a2fd6bb50065255f68fb73 Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期六, 10 十月 2020 15:06:46 +0800
Subject: [PATCH] V1.17 云南发货
---
Src/application/dw_app.c | 62 ++++++++++++++++++++----------
1 files changed, 41 insertions(+), 21 deletions(-)
diff --git a/Src/application/dw_app.c b/Src/application/dw_app.c
index 62857f9..2abebf4 100644
--- a/Src/application/dw_app.c
+++ b/Src/application/dw_app.c
@@ -54,7 +54,7 @@
#define DELAY_BETWEEN_TWO_FRAME_UUS 400
-#define POLL_RX_TO_RESP_TX_DLY_UUS 420
+#define POLL_RX_TO_RESP_TX_DLY_UUS 470
/* This is the delay from the end of the frame transmission to the enable of the receiver, as programmed for the DW1000's wait for response feature. */
#define RESP_TX_TO_FINAL_RX_DLY_UUS 200
/* Receive final timeout. See NOTE 5 below. */
@@ -92,7 +92,7 @@
static uint8_t tx_sync_msg[14] = {0};
static uint8_t tx_final_msg[60] = {0};
static uint8_t tx_resp_msg[22] = {0};
-static uint8_t tx_near_msg[80] = {0};
+ uint8_t tx_near_msg[80] = {0};
static uint32_t frame_seq_nb = 0;
static uint32_t status_reg = 0;
@@ -291,10 +291,10 @@
u8 flag_finalsend,flag_getresponse,flag_rxon;
uint16_t current_count,start_count,end_count,lastsync_timer;
-u8 nearbase_num=0,last_nearbase_num,next_nearbase_num,last_slotnum;
+u8 nearbase_num=0,last_nearbase_num,next_nearbase_num,last_slotnum, para_update,para_len,stationary_flag=0;
u32 rec_tagpos_binary;
int16_t offset=2700;
-u8 motor_state,rec_remotepara_state,rec_remotepara[30];
+u8 motor_state,rec_remotepara_state,rec_remotepara[80];
void NearPoll(void)
{
@@ -317,8 +317,8 @@
recbase_num=0;
motor_state=0;
- tx_near_msg[BATTARY_IDX] = Get_Battary();
- //tx_near_msg[BUTTON_IDX] = !READ_KEY0;
+ tx_near_msg[BATTARY_IDX] = bat_percent;
+ tx_near_msg[BUTTON_IDX] = !GET_USERKEY|stationary_flag<<1;
tx_near_msg[SEQUENCE_IDX] = frame_seq_nb++;
tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
memcpy(&tx_near_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
@@ -328,12 +328,14 @@
dwt_writetxfctrl(13+2*nearbase_num, 0);//设置超宽带发送数据长度
dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
+ tx_near_msg[TAGCONFIGSUCCESS_INDEX] =0;
+ para_update = 0;
flag_finalsend=0;
flag_rxon=1;
flag_getresponse=0;
start_count=HAL_LPTIM_ReadCounter(&hlptim1);
recbase_num=0;
- timeout=ceil((float)nearbase_num*0.4)+2;
+ timeout=ceil((float)nearbase_num*SLOT_SCALE)+3;
end_count=start_count+(timeout<<5);
if(end_count>=32768)
{end_count-=32768;}
@@ -427,6 +429,14 @@
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX], resp_rx_ts);
final_msg_set_ts(&tx_near_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
tx_near_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
+ if(rec_remotepara_state&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2))
+ {
+ para_update = 1;
+ tx_near_msg[TAGCONFIGSUCCESS_INDEX] = 1;
+ para_len = frame_len-22;
+ memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],para_len);
+ }
+
dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
flag_getresponse=1;
@@ -442,17 +452,7 @@
lastsync_timer=sync_timer;
offsettimeus=ancsync_time-current_count*LPTIMER_LSB+offset;
SetNextPollTime(tyncpoll_time);
- if(rec_remotepara_state&&rec_remotepara_state!=g_com_map[REMOTEPARA_STATE])
- {
- g_com_map[REMOTEPARA_STATE]=rec_remotepara_state;
- memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],REMOTEPARA_LEN);
- memcpy(&g_com_map[COM_INTERVAL],&rec_remotepara[0],8);
- memcpy(&g_com_map[POWER],&rec_remotepara[8],10);
- save_com_map_to_flash();
- delay_ms(100);
- NVIC_SystemReset();
-
- }
+
// count_offset=sync_count-current_count-143;
// current_slottimes=(ancsync_time-10000)/(g_com_map[COM_INTERVAL]*1000);
@@ -491,12 +491,17 @@
{
motor_state=rx_buffer[MOTORSTATE_INDEX];
}
-
+ if(rec_remotepara_state&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2))
+ {
+ para_update = 1;
+ tx_near_msg[TAGCONFIGSUCCESS_INDEX] = 1;
+ para_len = frame_len-22;
+ memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],para_len);
+ }
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);
dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
-
//dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
// result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送
@@ -581,7 +586,22 @@
{
nearbase_distlist[i]=0x1ffff;
}
-
+ if(para_update)
+ {
+ uint8_t pack_length = 0,pack_index = 0,pack_msgtype = 0;
+ pack_msgtype = rec_remotepara[0];
+ pack_index = rec_remotepara[1];
+ pack_length = rec_remotepara[2];
+ if(pack_msgtype==2)
+ {
+ memcpy((uint8_t*)&g_com_map + pack_index, &rec_remotepara[3], pack_length);
+ //返回一个error状态
+ //SendComMap(pack_datalen,pack_index);
+ save_com_map_to_flash();
+ delay_ms(100);
+ NVIC_SystemReset();
+ }
+ }
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
--
Gitblit v1.9.3