From baf8b42fca25208021259fde69eabdd2fc31cefa Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期六, 25 三月 2023 18:38:23 +0800
Subject: [PATCH] 阶段性调试1
---
Src/main.c | 99 ++++++++++++++++++++++++++-----------------------
1 files changed, 53 insertions(+), 46 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index b41edc2..69c9149 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -101,7 +101,7 @@
}
void UsartInit(void)
{
- waitusart_timer = tag_frequency*USART_KEEPWAKE_TIME;
+// waitusart_timer = tag_frequency*USART_KEEPWAKE_TIME;
MX_DMA_Init();
MX_USART1_UART_Init();
if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
@@ -139,6 +139,7 @@
}else{
motor_state = 0;
}
+ //motor_state=2;
switch(motor_state)
{case 0:
if(hardware_type==NSH1)
@@ -207,31 +208,7 @@
LED_LG_OFF;
// }
}
- if(g_com_map[CNT_UPDATE]==1)
- {
- uint32_t result = 0;
- uint16_t tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 128);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- g_com_map[CNT_UPDATE]=0;
- save_com_map_to_flash();
- delay_ms(100);
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_REBOOT]==1)
- {
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
+
if(g_com_map[CNT_RESTART]==1)
{
g_com_map[CNT_RESTART]=0;
@@ -280,14 +257,14 @@
hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x0225;
+ g_com_map[VERSION] = (2<<8)|62;
// g_com_map[DEV_ID]=0x7;
#ifdef DEBUG_MODE
// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=0x4009;
+ // g_com_map[DEV_ID]=0x4009;
// g_com_map[ACTIVE_INDEX]=1;
- g_com_map[COM_INTERVAL]=50;
+// g_com_map[COM_INTERVAL]=50;
// g_com_map[MAX_REPORT_ANC_NUM]=1;
// g_com_map[NOMOVESLEEP_TIME]=10;
// g_com_map[IMU_ENABLE]=0;
@@ -295,7 +272,7 @@
#endif
//g_com_map[NOMOVESLEEP_TIME]=10;
// g_com_map[IMU_ENABLE]=0;
- g_com_map[COM_INTERVAL]=50;
+// g_com_map[COM_INTERVAL]=50;
active_flag = g_com_map[ACTIVE_INDEX];
if(active_flag==0)
{
@@ -312,12 +289,12 @@
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
//slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
- slottime = 5;
+ slottime = 5;
max_slotpos=g_com_map[COM_INTERVAL]/slottime;
tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
lastpoll_time=tyncpoll_time;
- tag_frequency = 1000/g_com_map[COM_INTERVAL];
+ tag_frequency = 1;
bigslot_num = TOTAL_SLOTNUM/tag_frequency;
current_slotnum=1;
current_time=GetLPTime();
@@ -351,14 +328,15 @@
void HardWareTypeDiffConfig(void)
{
-GPIO_InitTypeDef GPIO_InitStruct = {0};
-//hardware_type=2;
-if(hardware_type == 0)
- hardware_type = 1;
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(g_com_map[MOTORBEEPER_INDEX]!=1&&g_com_map[MOTORBEEPER_INDEX]!=2)
+ {
+ g_com_map[MOTORBEEPER_INDEX] = 2;
+ }
+ hardware_type = 1;//g_com_map[MOTORBEEPER_INDEX];;
switch(hardware_type)
{
- case 1:
-
+ case 1:
HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
GPIO_InitStruct.Pin = MOTOR_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
@@ -414,20 +392,21 @@
/* USER CODE BEGIN 2 */
LED_LG_ON;
Program_Init();
- LIS3DH_Data_Init();
+ Accelerometer_Init();
BarInit();
Dw1000_Init();
Dw1000_App_Init();
HardWareTypeDiffConfig();
dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
dwt_entersleep();
- waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
+// waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
DW_DISABLE;
if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
{
Error_Handler();
}
-
+
+
// HAL_Delay(2000);
// mcu_sleep();
//LED0_BLINK;
@@ -446,7 +425,7 @@
// {
// MODBUS_Poll();
// }
-if(m_bEUARTTxEn==0&&waitusart_timer==0&&(motor_state==0||motor_state==3))
+if(m_bEUARTTxEn==0&&(motor_state==0||motor_state==3))
{
#ifndef DEBUG_MODE
if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
@@ -456,6 +435,7 @@
if(g_start_send_flag&&active_flag)
{ static uint16_t blink_count=0;
g_start_send_flag = 0;
+ static u8 uwbcount =0;
// GetPressAndTemp();
// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
// {
@@ -464,6 +444,7 @@
// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
// }
// LED_TR_BLINK;
+ __disable_irq();
if(bat_percent>15)
{ LED_TB_ON;
Tag_App();
@@ -473,6 +454,8 @@
Tag_App();
LED_TR_OFF;
}
+
+ __enable_irq();
//LED0_BLINK;
IdleTask();
if(waitusart_timer>0)
@@ -908,6 +891,8 @@
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+
HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
HAL_PWR_DisableWakeUpPin(PWR_WAKEUP_PIN1);
/*Clear all related wakeup flags*/
@@ -917,21 +902,43 @@
/*Enter the Standby mode*/
HAL_PWR_EnterSTANDBYMode();
}
-extern u16 tagslotpos;
-extern uint8_t tx_near_msg[80],stationary_flag,gotosleep_flag;
+
+extern u16 tagslotpos,current_slotpos;
+extern uint8_t tx_near_msg[80],stationary_flag,gotosleep_flag,current_sync_sec,tagpoll_sync_sec,flag_tagnewpos;
float key_keeptime;
extern float motor_ontime;
+extern uint16_t rec_tagperiod;
+void GetRandomPos(void)
+{
+ current_slotpos = HAL_LPTIM_ReadCounter(&hlptim1)%max_slotpos; //如果丢失连接超过5次就随机换个时间片
+ tagpoll_sync_sec = current_slotpos/200;
+ tagslotpos = current_slotpos%200;
+ flag_tagnewpos = 0;
+}
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
static uint8_t i=0;
SystemClock_Config();
- g_start_send_flag=1;
+
// current_slotnum++;
// SetNextPollTime(tagslotpos);
+ if(current_slotpos>=max_slotpos)
+ {
+ GetRandomPos();
+ }
+ if(current_sync_sec==tagpoll_sync_sec)
+ {
+ g_start_send_flag=1;
+ }
+ current_sync_sec++;
+ if(current_sync_sec>=(rec_tagperiod)/10||current_sync_sec>10)
+ {
+ current_sync_sec=0;
+ }
nomove_count+=1/(float)tag_frequency;
if(motor_keeptime>0)
{
- motor_keeptime-=1/(float)tag_frequency;
+ motor_keeptime-=1/(float)tag_frequency;
}
if(motor_keeptime<0)
{motor_keeptime = 0;}
--
Gitblit v1.9.3