From c72bc92107cddcd074e07d032e54177866cc845d Mon Sep 17 00:00:00 2001
From: zhyinch <zhyinch@gmail.com>
Date: 星期二, 19 十月 2021 09:48:48 +0800
Subject: [PATCH] 1
---
Src/main.c | 19 +++++++++----------
1 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 806fe84..266fb02 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -31,7 +31,7 @@
#define NSH1 0x0001
#define GP 0x0002
-//#define DEBUG_MODE
+#define DEBUG_MODE
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -311,14 +311,14 @@
hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x0223;
+ g_com_map[VERSION] = 0x0226;
// g_com_map[DEV_ID]=0x7;
#ifdef DEBUG_MODE
// g_com_map[DEV_ROLE]=1;
// g_com_map[DEV_ID]=0x4009;
// g_com_map[ACTIVE_INDEX]=1;
- g_com_map[COM_INTERVAL]=100;
+// g_com_map[COM_INTERVAL]=100;
// g_com_map[MAX_REPORT_ANC_NUM]=1;
// g_com_map[NOMOVESLEEP_TIME]=10;
// g_com_map[IMU_ENABLE]=0;
@@ -335,7 +335,7 @@
g_com_map[NOMOVESLEEP_TIME]=10;
g_com_map[MOTOR_ENABLE]=0;
}
-g_com_map[HEIGHTOFFEST_INDEX]=g_com_map[MAX_REPORT_ANC_NUM];
+//g_com_map[HEIGHTOFFEST_INDEX]=g_com_map[MAX_REPORT_ANC_NUM];
module_power = g_com_map[POWER];
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
@@ -383,7 +383,7 @@
void HardWareTypeDiffConfig(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
-//hardware_type=2;
+hardware_type=2;
if(hardware_type == 0)
hardware_type = 1;
switch(hardware_type)
@@ -399,7 +399,6 @@
break;
case 2:
MX_TIM2_Init();
- BarInit();
break;
}
}
@@ -447,7 +446,7 @@
LED_LG_ON;
Program_Init();
LIS3DH_Data_Init();
- // BarInit();
+ BarInit();
Dw1000_Init();
Dw1000_App_Init();
HardWareTypeDiffConfig();
@@ -850,10 +849,10 @@
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOA, SPI_CS_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOB, SCL_Pin|SDA_Pin|BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
@@ -872,7 +871,7 @@
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+ HAL_GPIO_Init(SCL_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pin : SPI_CS_Pin */
GPIO_InitStruct.Pin = SPI_CS_Pin;
--
Gitblit v1.9.3