From cf92a2fedf94d889b1a39e8557221149ea554a3c Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期五, 19 五月 2023 14:30:44 +0800
Subject: [PATCH] v2.8

---
 Src/main.c |  239 ++++++++++++++++++++++++++++++++++++++---------------------
 1 files changed, 153 insertions(+), 86 deletions(-)

diff --git a/Src/main.c b/Src/main.c
index 3eabb11..aaada68 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -31,7 +31,7 @@
 
 #define NSH1 0x0001
 #define GP   0x0002
-//#define DEBUG_MODE
+#define DEBUG_MODE
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -109,9 +109,34 @@
 	 Error_Handler();
 	}
 }
+void LP_delayms(u16 time)
+{
+    u16 startcount = HAL_LPTIM_ReadCounter(&hlptim1);
+    u16 endcount = startcount+time*33;
+    if(endcount>LPTIMER_1S_COUNT)
+        endcount-=LPTIMER_1S_COUNT;
+    while(HAL_LPTIM_ReadCounter(&hlptim1)<endcount ||HAL_LPTIM_ReadCounter(&hlptim1)>endcount+LPTIMER_1S_COUNT/2);
+    
+}
+void JianXieMotorProcess(void)
+{
+    MOTOR_ON;
+    LP_delayms(120);
+    MOTOR_OFF;
+    LP_delayms(110);
+        MOTOR_ON;
+    LP_delayms(120);
+    MOTOR_OFF;
+    LP_delayms(110);
+        MOTOR_ON;
+    LP_delayms(120);
+    MOTOR_OFF;
+    LP_delayms(110);
+}
 uint16_t hardware_version,hardware_pici,hardware_type;
 u16 current_time;
-uint8_t state5v;
+float motor5s_timer=1000;
+uint8_t state5v,motorskip_flag;
 void IdleTask(void)
 {
 	
@@ -130,60 +155,92 @@
 //	LED_TR_OFF;
 	current_time=GetLPTime();
 	//motor_state=2;
+    //motor_state = 1;
 if(g_com_map[MOTOR_ENABLE])
 {
-    
-//		if(motor_keeptime>0)
-//		{
-//			motor_state = 2;
-//		}else{
-//			motor_state = 0;
-//		}
-		//motor_state=2;
-	switch(motor_state)
-		{case 0:
-			if(hardware_type==NSH1)
-			{MOTOR_OFF;
-			}else if(hardware_type==GP)
-			{
-			HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
-			}
-			break;
-		case 1:
-			if(current_time<MOTOR_ONTIME)
-			{
-				if(hardware_type==NSH1)
-				{MOTOR_ON;
-				}else if(hardware_type==GP)
-				{
-				HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
-				}	
-			}else{
-				if(hardware_type==NSH1)
-				{MOTOR_OFF;
-				}else if(hardware_type==GP)
-				{
-				HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
-				}	
-			}				
-			break;
-		case 2:
-			if(hardware_type==NSH1)
-				{MOTOR_ON;
-				}else if(hardware_type==GP)
-				{
-				HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
-				}	
-			break;
-		case 3:
-			if(hardware_type==NSH1)
-				{MOTOR_OFF;
-				}else if(hardware_type==GP)
-				{
-				HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
-				}	
-			break;	
-	}
+    static u8 motor5s_state = 0,outside_count=0;
+    if(motorskip_flag==0)
+    {
+        if(motor_state==2)
+        { 
+            outside_count =0;
+            if(motor5s_state)
+            {
+                if(motor5s_timer>4)
+                {
+                    motor5s_timer = 0;
+                    motor5s_state = 0;
+                    JianXieMotorProcess();
+                }
+            }else{           
+                if(motor5s_timer>300)
+                {
+                    motor5s_timer = 0;
+                    motor5s_state = 1;
+                    JianXieMotorProcess();
+                } 
+            }
+        }else{
+            if(outside_count++>3)
+            {
+                motor5s_state = 1;
+                motor5s_timer = 0;  
+            }                
+        }
+    }else{
+        if(motor5s_timer>7200)  //2个小时 7200
+        {
+           motorskip_flag = 0;
+           motor5s_timer = 1000; 
+           motor5s_state = 0;
+           JianXieMotorProcess();
+        }
+    }
+//	switch(motor_state)
+//		{case 0:
+//			if(hardware_type==NSH1)
+//			{MOTOR_OFF;
+//			}else if(hardware_type==GP)
+//			{
+//			HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+//			}
+//			break;
+//		case 1:
+//			if(current_time<MOTOR_ONTIME)
+//			{
+//				if(hardware_type==NSH1)
+//				{
+//                    MOTOR_ON;
+//				}else if(hardware_type==GP)
+//				{
+//				HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
+//				}	
+//			}else{
+//				if(hardware_type==NSH1)
+//				{MOTOR_OFF;
+//				}else if(hardware_type==GP)
+//				{
+//				HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+//				}	
+//			}				
+//			break;
+//		case 2:
+//			if(hardware_type==NSH1)
+//				{MOTOR_ON;
+//				}else if(hardware_type==GP)
+//				{
+//				HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
+//				}	
+//			break;
+//		case 3:
+//			if(hardware_type==NSH1)
+//				{MOTOR_OFF;
+//				}else if(hardware_type==GP)
+//				{
+//				HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
+//				}	
+//			break;	
+//	}
 }
     bat_percent=Get_Battary();
 	if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
@@ -194,7 +251,7 @@
 			state5v=1;
 			UsartInit();
 		}
-		if(HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
+		if(bat_percent>90)
 		{
 			LED_LR_OFF;
 			LED_LG_ON;
@@ -257,12 +314,12 @@
 	hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
 	hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
 	//deca_sleep(1000);
-	g_com_map[VERSION] = (2<<8)|1;
+	g_com_map[VERSION] = (2<<8)|8;
     
 //	g_com_map[DEV_ID]=0x7;
 #ifdef DEBUG_MODE
 //	g_com_map[DEV_ROLE]=1;
-	//	g_com_map[DEV_ID]=0x4009;
+//		g_com_map[DEV_ID]=0x4009;
 //    g_com_map[ACTIVE_INDEX]=1;
 //	g_com_map[COM_INTERVAL]=50;
 //	g_com_map[MAX_REPORT_ANC_NUM]=1;
@@ -421,10 +478,6 @@
     /* USER CODE END WHILE */
 
     /* USER CODE BEGIN 3 */
-//				while(1)
-//		{
-//		MODBUS_Poll();
-//		}
 if(m_bEUARTTxEn==0&&(motor_state==0||motor_state==3))
 			{	
 #ifndef DEBUG_MODE	
@@ -837,11 +890,11 @@
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(BAT_MEAS_GND_GPIO_Port, &GPIO_InitStruct);
 
-  /*Configure GPIO pin : USER_KEY_Pin */
-  GPIO_InitStruct.Pin = USER_KEY_Pin;
+  /*Configure GPIO pins : USER_KEY_Pin PB14 */
+  GPIO_InitStruct.Pin = USER_KEY_Pin|GPIO_PIN_14;
   GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
   GPIO_InitStruct.Pull = GPIO_PULLUP;
-  HAL_GPIO_Init(USER_KEY_GPIO_Port, &GPIO_InitStruct);
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
   /*Configure GPIO pin : INPUT_5V_Pin */
   GPIO_InitStruct.Pin = INPUT_5V_Pin;
@@ -872,6 +925,9 @@
   /* EXTI interrupt init*/
   HAL_NVIC_SetPriority(EXTI0_1_IRQn, 1, 0);
   HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);
+
+  HAL_NVIC_SetPriority(EXTI4_15_IRQn, 1, 0);
+  HAL_NVIC_EnableIRQ(EXTI4_15_IRQn);
 
 }
 
@@ -904,7 +960,7 @@
 }
 
 extern u16 tagslotpos,current_slotpos;
-extern uint8_t tx_near_msg[80],stationary_flag,gotosleep_flag,current_sync_sec,tagpoll_sync_sec,flag_tagnewpos;
+extern uint8_t tx_near_msg[80],stationary_flag,gotosleep_flag,current_sync_sec,tagpoll_sync_sec,flag_tagnewpos,userkey_state;
 float key_keeptime;
 extern float motor_ontime;
 extern  uint16_t rec_tagperiod;
@@ -915,32 +971,37 @@
     tagslotpos = current_slotpos%200;
     flag_tagnewpos = 0;
 }
+float lptimedelay=0;
 void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
 {
 	static uint8_t i=0;
 	SystemClock_Config();
-if(tag_frequency>1)
-{	
-    g_start_send_flag=1;
-}else{
-   if(current_slotpos>=max_slotpos)
-   {
-    GetRandomPos();
-   }
-    if(current_sync_sec==tagpoll_sync_sec)
-    {
+    if(tag_frequency>1)
+    {	
         g_start_send_flag=1;
+        lptimedelay = 1/(float)tag_frequency;
+    }else{
+        lptimedelay = 1;
+        tag_frequency = 1;
+       if(current_slotpos>=max_slotpos)
+       {
+        GetRandomPos();
+       }
+        if(current_sync_sec==tagpoll_sync_sec)
+        {
+            g_start_send_flag=1;
+        }
+        current_sync_sec++;
+        if(current_sync_sec>=(rec_tagperiod)/10||current_sync_sec>10)
+        {
+            current_sync_sec=0;
+        } 
     }
-    current_sync_sec++;
-    if(current_sync_sec>=(rec_tagperiod)/10||current_sync_sec>10)
-    {
-        current_sync_sec=0;
-    } 
-}
-	nomove_count+=1/(float)tag_frequency;
+    motor5s_timer+=lptimedelay;
+	nomove_count+=lptimedelay;
 	if(motor_keeptime>0)
 	{	
-        motor_keeptime-=1/(float)tag_frequency;
+        motor_keeptime-=lptimedelay;
 	}
     if(motor_keeptime<0)
     {motor_keeptime = 0;}
@@ -949,7 +1010,7 @@
 	if(!GET_USERKEY)
 	{
 		LED_LG_ON;
-			key_keeptime+=1/(float)tag_frequency;
+			key_keeptime+=lptimedelay;
 		if(key_keeptime>3)
 		{
 			u8 i=250,keystate=1;
@@ -979,13 +1040,19 @@
 		
 	}
 
-	if(!GET_USERKEY)
+	if(!GET_USERKEY||!HAL_GPIO_ReadPin(USER_KEY_GPIO_Port,GPIO_PIN_14))
 	{
-		key_keeptime+=1/(float)tag_frequency;
+		key_keeptime+=lptimedelay;
+        if(key_keeptime>=3)
+		{
+            JianXieMotorProcess();
+			userkey_state = 1; 
+		}
 		if(key_keeptime>=KEY_KEEPRESET_TIME)
 		{
 			SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; 
 		}
+        
 	}else{
 		key_keeptime=0;
 	}

--
Gitblit v1.9.3