From d53db68d643026fc207af89dfb36f67f331852fe Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期四, 22 八月 2024 15:02:30 +0800
Subject: [PATCH] V2.1,去掉全部功能，只负责开机，配合urt进入高精度后自动关机的固件使用
---
Src/application/dw_app.c | 79 +++++++++++++++++++++++++++++++--------
1 files changed, 62 insertions(+), 17 deletions(-)
diff --git a/Src/application/dw_app.c b/Src/application/dw_app.c
index d97279d..68e1f01 100644
--- a/Src/application/dw_app.c
+++ b/Src/application/dw_app.c
@@ -81,7 +81,7 @@
SINGLEPOLL,
}tag_state=STARTPOLL;
static dwt_config_t config = {
- 3, /* Channel number. */
+ 2, /* Channel number. */
DWT_PRF_64M, /* Pulse repetition frequency. */
DWT_PLEN_128, /* Preamble length. */
DWT_PAC8, /* Preamble acquisition chunk size. Used in RX only. */
@@ -573,7 +573,7 @@
memcpy(&mindist_ancid,&rx_buffer[ANCHOR_ID_IDX],2);
}
- send_buffer[MESSAGE_TYPE_IDX] = FINAL;
+ send_buffer[MESSAGE_TYPE_IDX] = DISCOVERFINAL;
/* Compute final message transmission time. See NOTE 9 below. */
final_tx_time = (resp_rx_ts + (600 * UUS_TO_DWT_TIME)) >> 8;//计算final包发送时间，T5=T4+Treply2
dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
@@ -718,10 +718,10 @@
{
nearbase_distlist[nearmsg_i] = 0x1ffff;
}
-//mainbase_id = 0x9818;
+//mainbase_id = 0x1;
memcpy(&tx_near_msg[ANCHOR_ID_IDX],&mainbase_id,2);
memcpy(&tx_near_msg[TAG_ID_IDX],&dev_id,2);
- tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_MSG;
+ tx_near_msg[MESSAGE_TYPE_IDX] = POS_MSG;
dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS); //设置发送后开启接收，并设定延迟时间
@@ -752,7 +752,7 @@
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK; //获得接收到的数据长度
dwt_readrxdata(rx_buffer, frame_len, 0); //读取接收数据
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_MSG&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
+ if (rx_buffer[MESSAGE_TYPE_IDX] == POS_MSG&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
{
nearbase_num=rx_buffer[NEARBASENUM_INDEX];
memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
@@ -769,7 +769,34 @@
// tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
}
}
+void SendHuiZongData(void)
+{
+ usart_send[2] = 0x0c;//正常模式
+ usart_send[3] = 15+8*(nearbase_num+1);//数据段长度
+ memcpy(&usart_send[4],&dev_id,2);
+ usart_send[6] = frame_seq_nb;
+ usart_send[7] = frame_seq_nb>>8;
+ usart_send[8] = bat_percent;
+ usart_send[9] = tx_near_msg[BUTTON_IDX];
+
+ memcpy(&usart_send[10],&intheight,2);
+ usart_send[12] = tag_frequency;
+ usart_send[13] = tagslotpos;
+ usart_send[14] = 0;
+ usart_send[15] = 0;
+ usart_send[16] = nearbase_num+1;
+ memcpy(&usart_send[17],&mainbase_id,2);
+ memcpy(&usart_send[19],&nearbaseid_list,2*nearbase_num);
+ memcpy(&usart_send[19+nearbase_num*2],&nearbase_distlist,4*nearbase_num+4);
+ memcpy(&usart_send[19+nearbase_num*6+4],&rec_anc_signalpower,2*nearbase_num+2);
+
+ checksum = Checksum_u16(&usart_send[2],23+8*nearbase_num);
+ memcpy(&usart_send[25+8*nearbase_num],&checksum,2);
+ USART_puts(usart_send,27+8*nearbase_num);
+ //HexToAsciiSendUDP(usart_send,27+8*nearbase_num);
+}
uint8_t pack_length = 0,pack_index = 0,pack_msgtype = 0;
+uint8_t motor_flag;
void NearPoll(void)
{
@@ -794,22 +821,28 @@
recbase_num=0;
// motor_state=0;
+ if(motor_state!=0&&motor_state!=3)
+ {
+ motor_flag = 1;
+ }else{
+ motor_flag = 0;
+ }
tx_near_msg[BATTARY_IDX] = bat_percent;
- tx_near_msg[BUTTON_IDX] = userkey_state|stationary_flag<<1|gotosleep_flag<<2;
+ tx_near_msg[BUTTON_IDX] = userkey_state|stationary_flag<<1|gotosleep_flag<<2|motor_flag<<5;
tx_near_msg[SEQUENCE_IDX] = frame_seq_nb;
- tx_near_msg[SEQUENCEH_IDX] = (frame_seq_nb++)>>8;
+ tx_near_msg[SEQUENCEH_IDX] = (frame_seq_nb++)>>8;
tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
memcpy(&tx_near_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
- memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*2],&nearbase_distlist,nearbase_num*4+4);
- memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*6+4],&rec_anc_signalpower,nearbase_num*2+2);
+ memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*2],&nearbase_distlist,nearbase_num*4+4);
+ memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*6+4],&rec_anc_signalpower,nearbase_num*2+2);
if(intheight!=0)
intheight+=g_com_map[HEIGHTOFFEST_INDEX];
memcpy(&tx_near_msg[NEARBASEID_INDEX+nearbase_num*8+6],&intheight,2);
- tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_POLL;
+ tx_near_msg[MESSAGE_TYPE_IDX] = POS_POLL;
tx_near_msg[NEARP_TAGFREQ_INDEX] = tag_frequency;
tx_near_msg[NEARP_TAGSLOTPOS_INDEX] = tagslotpos;
@@ -869,7 +902,7 @@
dwt_setrxtimeout(0);//设定接收超时时间，0位没有超时时间
dwt_rxenable(0);//打开接收
//HAL_GPIO_WritePin(LED1_G_GPIO_Port, LED1_G_Pin, GPIO_PIN_SET);
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
+ if (rx_buffer[MESSAGE_TYPE_IDX] == POS_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
{ u16 rec_nearbaseid,rec_nearbasepos;
poll_tx_ts = get_tx_timestamp_u64(); //获得POLL发送时间T1
resp_rx_ts = get_rx_timestamp_u64(); //获得RESPONSE接收时间T4
@@ -887,7 +920,7 @@
final_msg_set_ts(&tx_near_msg[FINAL_MSG_POLL_TX_TS_IDX], poll_tx_ts);//将T1，T4，T5写入发送数据
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+nearbase_num*4], resp_rx_ts);
final_msg_set_ts(&tx_near_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
- tx_near_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
+ tx_near_msg[MESSAGE_TYPE_IDX]=POS_FINAL;
rec_remotepara_state=rx_buffer[MOTORSTATE_INDEX]>>4;
if(rec_remotepara_state&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2))
{
@@ -975,7 +1008,7 @@
{
mainbase_id = rec_nearbaseid;
tag_state = GETNEARMSG;
- trygetnearmsg_times = 0;
+ trygetnearmsg_times = 0;
}
#endif
@@ -1039,7 +1072,17 @@
{
if(motor_keeptime==0)
motor_keeptime = rec_remotepara[3];
- }else{
+ }else if( pack_index == 2*COM_INTERVAL)
+ {
+ if(memcmp(&g_com_map[COM_INTERVAL],&rec_remotepara[3],2)!=0)
+ {
+ memcpy((uint8_t*)&g_com_map + pack_index, &rec_remotepara[3], pack_length);
+ save_com_map_to_flash();
+ tag_frequency = 1000/g_com_map[COM_INTERVAL];
+ bigslot_num = TOTAL_SLOTNUM/tag_frequency;
+ }
+ }
+ else{
if(pack_index<200)
{
memcpy((uint8_t*)&g_com_map + pack_index, &rec_remotepara[3], pack_length);
@@ -1052,14 +1095,14 @@
}
}
}
- if(get_newdist>2)
+ if(get_newdist>=2)
{
notenoughdist_count = 0;
}else{
- if(notenoughdist_count++>3)
+ if(notenoughdist_count++>10)
{
notenoughdist_count = 0;
- // tag_state = DISCPOLL;
+ tag_state = DISCPOLL;
}
}
for(i=0;i<nearbase_num;i++)
@@ -1071,6 +1114,7 @@
nearbaseid_list0[i]=1;
}
}
+ // SendHuiZongData();
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
//HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
@@ -1214,6 +1258,7 @@
// Poll();
break;
}
+ FZNearPoll();
userkey_state = !GET_USERKEY;
dwt_entersleep();
}
--
Gitblit v1.9.3