From d8a6d069f2a7f2b836c84c5be40abed3dd393297 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期三, 04 十二月 2024 16:26:57 +0800
Subject: [PATCH] V1.33,修复充电重启bug，修复灯充电常量bug，可以跟1.24的lora免布线基站测距
---
Src/main.c | 69 +++++++++++++++++++++++++++-------
1 files changed, 55 insertions(+), 14 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index 9e4e042..858d1f3 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -222,18 +222,36 @@
{ state5v=1;
LoraInit();
HAL_UART_DMAStop(&hlpuart1); // 停止DMA传输，防止
+ Radio.Sleep();
+ powerled=LEDOFF;
+ loraled=LEDOFF;
+ gpsled=LEDOFF;
+ uwbled=LEDOFF;
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET); //GuanGPS and lora 电源
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_RESET); //guan uwb 电源
+ HAL_SPI_DeInit(&hspi1);
+ HAL_SPI_DeInit(&hspi2);
+ HAL_GPIO_WritePin( RADIO_NSS_GPIO_Port, RADIO_NSS_Pin,GPIO_PIN_RESET);//lora cs
+ HAL_GPIO_WritePin( GPIOA, GPIO_PIN_4,GPIO_PIN_RESET);//uwb cs
+ HAL_GPIO_WritePin( GPIOC, GPIO_PIN_3,GPIO_PIN_RESET);//LORA REST
+ Usart5DeInit();
+ LpusartDeInit();
+// HAL_ADC_DeInit(&hadc);
while(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
UART_CheckReceive();
UART_CheckSend();
nomove_count = 0;
-
+ HAL_IWDG_Refresh(&hiwdg);
if(bat_percent>95)
{
powerled=GREEN;
}else{
powerled=RED;
}
+ uwbled=0;
+ gpsled=0;
+ loraled=0;
}
HAL_NVIC_SystemReset();
}else{
@@ -316,7 +334,7 @@
hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = (1<<8)|30;
+ g_com_map[VERSION] = (1<<8)|33;
// g_com_map[DEV_ID]=1158;
// #ifdef DEBUG_MODE
// // g_com_map[GROUP_ID]=21;
@@ -325,7 +343,7 @@
// // g_com_map[MAX_REPORT_ANC_NUM]=1;
// // g_com_map[NOMOVESLEEP_TIME]=10;
// #endif
- g_com_map[GROUP_ID]=0;
+// g_com_map[GROUP_ID]=0;
// g_com_map[COM_INTERVAL] = 1000;
if(g_com_map[COM_INTERVAL]<1000)
{g_com_map[COM_INTERVAL] = 1000;}
@@ -444,6 +462,8 @@
uint16_t irq_num;
u8 lora_irq_flag,lora_working_flag;
//u8 uwb_irq_flag;
+extern uint8_t LoraUp_flag;
+uint8_t anjian_num;
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
if(GPIO_Pin == RADIO_DIO1_Pin)
@@ -451,13 +471,31 @@
// SystemClock_Config();
irq_num++;
- lora_irq_flag = 1;
+
+ if(LoraUp_flag)
+ {
RadioIrqProcess();
+ }
+ else
+ {
+ lora_irq_flag = 1;
+ }
}
if(GPIO_Pin == GPIO_PIN_1)//按键
{
// SystemClock_Config();
- anjian_flag=1;
+ anjian_flag=1;
+ anjian_num++;
+ if(anjian_num==2)
+ {
+ g_com_map[LORA_SEND_INDEX] = !g_com_map[LORA_SEND_INDEX];
+ save_com_map_to_flash();
+ Set4LEDColor(YELLOW,YELLOW,YELLOW,YELLOW);
+ delay_ms(100);
+ Set4LEDColor_Off();
+ delay_ms(100);
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ }
}
if(GPIO_Pin == GPIO_PIN_0)//加速度
{
@@ -760,13 +798,13 @@
else
{
// HAL_IWDG_Refresh(&hiwdg);
-// if(lora_irq_flag)
-// {
-// lora_irq_flag = 0;
-// lora_working_flag = 1;
-// RadioIrqProcess();
-// lora_working_flag = 0;
-// }
+ if(lora_irq_flag)
+ {
+ lora_irq_flag = 0;
+ lora_working_flag = 1;
+ RadioIrqProcess();
+ lora_working_flag = 0;
+ }
// if(uwb_irq_flag)
// {
// MbxTagUwbRec();
@@ -776,7 +814,10 @@
OneSecondTask();
IdleTask();
PowerDownDetect();
- Lora_Send_Poll();
+ if(g_com_map[LORA_SEND_INDEX])
+ {
+ Lora_Send_Poll();
+ }
TTSchaxun_Busy();
LoraUp_Poll();
// #ifndef DEBUG_MODE
@@ -1418,7 +1459,7 @@
{
// SystemClock_Config();
Set4LEDColor(uwbled,gpsled,loraled,powerled); //代码有BUG需要执行2次，否则电源灯不亮
- Set4LEDColor(uwbled,gpsled,loraled,powerled);
+// Set4LEDColor(uwbled,gpsled,loraled,powerled);
//Set4LEDColor(powerled,loraled,gpsled,uwbled);
ledon_time = GetLPTime();
Bat_Percent_Poll();
--
Gitblit v1.9.3