From db36f74f33fca1df7b2ac72e54178db4d14b00a2 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期五, 07 二月 2025 10:12:46 +0800
Subject: [PATCH] 2.11，修改重启bug当周围防撞标签多的时候
---
Src/application/dw_app.c | 53 ++++++++++++++++++++++++++++++++++++++++-------------
1 files changed, 40 insertions(+), 13 deletions(-)
diff --git a/Src/application/dw_app.c b/Src/application/dw_app.c
index 7f10309..b460ef3 100644
--- a/Src/application/dw_app.c
+++ b/Src/application/dw_app.c
@@ -81,7 +81,7 @@
SINGLEPOLL,
}tag_state=STARTPOLL;
dwt_config_t config = {
- 2, /* Channel number. */
+ 5, /* Channel number. */
DWT_PRF_64M, /* Pulse repetition frequency. */
DWT_PLEN_128, /* Preamble length. */
DWT_PAC8, /* Preamble acquisition chunk size. Used in RX only. */
@@ -118,7 +118,7 @@
LPFilter_Frac* p_Dis_Filter; //测距用的低通滤波器
-
+void GetNearMsg(void);
static uint64_t get_tx_timestamp_u64(void)
{
uint8_t ts_tab[5];
@@ -185,9 +185,33 @@
/* Apply default antenna delay value. See NOTE 1 below. */
dwt_setrxantennadelay(RX_ANT_DLY); //设置接收天线延迟
dwt_settxantennadelay(TX_ANT_DLY); //设置发射天线延迟
+
/* Set expected response's delay and timeout. See NOTE 4 and 5 below.
* As this example only handles one incoming frame with always the same delay and timeout, those values can be set here once for all. */
//设置接收超时时间
+}
+uint8_t uwb_onflag=1;
+void UWB_RXON()
+{
+ if(!g_com_map[MODBUS_MODE])
+ {
+ Dw1000_Init();
+ uwb_onflag=1;
+ g_com_map[UWB_ONFLAG]=uwb_onflag;
+ save_com_map_to_flash();
+ }
+}
+void UWB_RXOFF()
+{
+ if(!g_com_map[MODBUS_MODE])
+ {
+ dwt_setinterrupt( DWT_INT_RFCG | (DWT_INT_ARFE | DWT_INT_RFSL | DWT_INT_SFDT | DWT_INT_RPHE | DWT_INT_RFCE | DWT_INT_RFTO | DWT_INT_RXPTO), 0);
+ dwt_forcetrxoff();
+ dwt_entersleep();
+ uwb_onflag=0;
+ g_com_map[UWB_ONFLAG]=uwb_onflag;
+ save_com_map_to_flash();
+ }
}
void Dw1000_App_Init(void)
{
@@ -609,8 +633,9 @@
if(minddist!=0x1ffff&&minddist!=0)
{
trygetnearmsg_times = 0;
- tag_state = GETNEARMSG;
+ tag_state = GETNEARMSG;
mainbase_id = mindist_ancid;
+ GetNearMsg();
}
if(getsync_flag==0)
@@ -1054,7 +1079,7 @@
}
nearbase_distlist[rec_nearbasepos+1]=temp_dist; // nearbase_distlist[1]对应 rec_nearbaseid[0]的距离
final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);
- if(temp_dist<salvebase_mindist&&nearbase_switchdistlist[rec_nearbasepos]!=0&&(nearbase_switchdistlist[rec_nearbasepos]==1||temp_dist<nearbase_switchdistlist[rec_nearbasepos]))
+ if(temp_dist<salvebase_mindist&&nearbase_switchdistlist[rec_nearbasepos]!=0&&(nearbase_switchdistlist[rec_nearbasepos]==1||temp_dist<nearbase_switchdistlist[rec_nearbasepos]))
{
salvebase_mindist = temp_dist;
mindist_slavebaseid = rec_nearbaseid;
@@ -1095,10 +1120,11 @@
changemainbase_count++;
if(changemainbase_count>2)
{
- changemainbase_count = 0;
- mainbase_id = mindist_slavebaseid;
- tag_state = GETNEARMSG;
- trygetnearmsg_times = 0;
+ changemainbase_count = 0;
+ mainbase_id = mindist_slavebaseid;
+ tag_state = GETNEARMSG;
+ trygetnearmsg_times = 0;
+ GetNearMsg();
}
}else{
changemainbase_count = 0;
@@ -1108,6 +1134,7 @@
{
mainbase_lost_count = 0;
tag_state = DISCPOLL;
+ DiscPoll();
}
if(mainbase_lost_count!=0)
{
@@ -1168,6 +1195,7 @@
if(nearbaseid_list[i]!=nearbaseid_list2[i])
{
tag_state = GETNEARMSG;
+ GetNearMsg();
trygetnearmsg_times = 0;
nearbaseid_list0[i]=1;
}
@@ -1213,10 +1241,10 @@
IdleTask();
};
- if(status_reg==0xffffffff)
- {
- NVIC_SystemReset();
- }
+// if(status_reg==0xffffffff)
+// {
+// NVIC_SystemReset();
+// }
if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
{
dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
@@ -1264,7 +1292,6 @@
}
}
u32 id,error_times=0;
-
extern float Height;
void Tag_App(void)//发送模式(TAG标签)
{
--
Gitblit v1.9.3