From e5d499776ae8dbebdc2d11b4aab44a3f9314b4bc Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期二, 19 十一月 2024 15:03:41 +0800
Subject: [PATCH] V1.16 3秒触发一次
---
Src/main.c | 66 ++++++++++++++++----------------
1 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index d3f563d..bc8c403 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -35,11 +35,13 @@
#include "stdio.h"
#include "delay.h"
#include "lora.h"
+#include "dps310.h"
#include "dw_mbx_anc.h"
#define NSH1 0x0001
#define GP 0x0002
#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
-#define DEBUG_MODE
+//#define DEBUG_MODE
+
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -92,7 +94,7 @@
/* USER CODE BEGIN 0 */
#define DIANLIANG_TIME 3600
uint8_t Anchor_Vcc_Flag;
-uint16_t Anchor_Vcc_time=DIANLIANG_TIME-2;
+uint16_t Anchor_Vcc_time=DIANLIANG_TIME+1;
uint32_t dev_id;
uint16_t heartbeat_timer,poll_timer,sync_timer;
uint8_t aRxBuffer[1],group_id;
@@ -245,7 +247,7 @@
hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = (6<<8)|0;
+ g_com_map[VERSION] = (1<<8)|16;
// testprogram();
// g_com_map[DEV_ID]=0x6777;
#ifdef DEBUG_MODE
@@ -256,43 +258,28 @@
// g_com_map[NOMOVESLEEP_TIME]=10;
#endif
g_com_map[ACTIVE_INDEX] = 1;
- g_com_map[GROUP_ID]=5;
- g_com_map[UWBPOLLTIME_MS_IDX] = 520;
+ g_com_map[GROUP_ID]=0;
+
g_com_map[COM_INTERVAL] = 1000;
- if(g_com_map[COM_INTERVAL]<1000)
- {g_com_map[COM_INTERVAL] = 1000;}
- active_flag = g_com_map[ACTIVE_INDEX];
- g_com_map[POWER]=0;
+ if(g_com_map[UWBPOLLTIME_MS_IDX]<10) //如果uwbpoll 时间小于10，随机生成一个小于一千的数。
+ {g_com_map[UWBPOLLTIME_MS_IDX] = GetRandomValue()%1000+10;}
+
+ if(g_com_map[UWBPOLLTIME_MS_IDX]>1000)
+ {
+ g_com_map[UWBPOLLTIME_MS_IDX] = GetRandomValue()%1000+10;
+ }
+
module_power = g_com_map[POWER];
g_com_map[IMU_ENABLE] = 0;
- imu_enable=g_com_map[IMU_ENABLE];
- motor_enable=g_com_map[MOTOR_ENABLE];
+
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
- max_slotpos=g_com_map[COM_INTERVAL]/slottime;
- tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;
- slot_startcount=tyncpoll_time*1000/LPTIMER_LSB;
- lastpoll_time=tyncpoll_time;
- tag_frequency = 1000/g_com_map[COM_INTERVAL];
- total_slotnum = 1000/g_com_map[COM_INTERVAL];
- nomovesleeptime = g_com_map[NOMOVESLEEP_TIME];
- if(active_flag==0)
- {
-
- }
- // g_com_map[COM_INTERVAL]=100;
- if(g_com_map[COM_INTERVAL]==0)
- {
- g_com_map[COM_INTERVAL]=1000;
- }
if(module_power>67)
{module_power=67;}
-
- current_slotnum=1;
- current_time=GetLPTime();
+
if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
@@ -435,6 +422,16 @@
MX_USART1_UART_Init();
MX_IWDG_Init();
/* USER CODE BEGIN 2 */
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_14, GPIO_PIN_RESET);
+ /*Configure GPIO pins : SCL_Pin SDA_Pin */
+ GPIO_InitStruct.Pin = GPIO_PIN_14;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
LED_LG_ON;
Program_Init();
// LIS3DH_Data_Init();
@@ -456,7 +453,9 @@
MbxInit();
// SwitchLoraSettingstest(UWB_CHANNEL_FRQ,UWB_CHANNEL_SF);
Delay_Ms(10);
+#ifdef _USE_BAR_
BarInit();
+#endif
// HAL_ADC_Start_DMA(&hadc,(uint32_t*)&AD_value,sizeof(AD_value));
/* USER CODE END 2 */
@@ -470,7 +469,7 @@
// Send_Anchor_Vcc_Poll();
if(g_start_send_flag&&g_com_map[ACTIVE_INDEX])
{
- SystemClock_Config();
+
g_start_send_flag = 0;
HAL_IWDG_Refresh(&hiwdg);
if(bat_percent>15)
@@ -922,12 +921,13 @@
extern uint8_t tx_near_msg[80],stationary_flag;
float key_keeptime;
extern float freqlost_count,range_lost_time;
+uint8_t g_start_send_time;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
static uint8_t i=0;
+ SystemClock_Config();
i++;
- Anchor_Vcc_time++;
- if(Anchor_Vcc_time>DIANLIANG_TIME)
+ if(Anchor_Vcc_time++>DIANLIANG_TIME)
{
Anchor_Vcc_Flag=1;
Anchor_Vcc_time=0;
--
Gitblit v1.9.3