From eeea481d10c49eeff6a2cafa9b49d4fce3ace8f8 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期五, 26 一月 2024 10:43:46 +0800
Subject: [PATCH] 1
---
Src/radio/Lora.c | 450 ++++++++++++++++++++++++++++++++++++-------------------
1 files changed, 291 insertions(+), 159 deletions(-)
diff --git a/Src/radio/Lora.c b/Src/radio/Lora.c
index b36232a..e61c977 100644
--- a/Src/radio/Lora.c
+++ b/Src/radio/Lora.c
@@ -10,12 +10,26 @@
#include "stdio.h"
#include "delay.h"
#include "main.h"
+#include <stdlib.h>
static RadioEvents_t RadioEvents;
#define USE_MODEM_LORA
//#define USE_MODEM_FSK
-#define REGION_CN779
+#define REGION_CN779
+void Lora47xrx_Init(void);
+void Lora433_change(void);
+void Lora433rx_Init(void);
uint32_t RxDutyCycle_RX_time =128;
uint32_t RxDutyCycle_SLEEP_time=256;
+#define LORA_FREQUENCY0 470200000
+#define LORA_FREQUENCY1 471200000
+#define LORA_FREQUENCY2 472200000
+#define LORA_FREQUENCY3 473200000
+#define LORA_FREQUENCY4 474200000
+uint16_t Lora_rece_error;
+#define LORA_RX_433 1
+#define LORA_TX_47X 2
+#define LORA_RX_47X 3
+uint8_t Lora_status=0;
#if defined( REGION_AS923 )
#define RF_FREQUENCY 923000000 // Hz
@@ -118,7 +132,7 @@
}States_t;
//#define RX_TIMEOUT_VALUE 1000
-#define RX_TIMEOUT_VALUE 64000
+#define RX_TIMEOUT_VALUE 100
#define BUFFER_SIZE 64 // Define the payload size here
const uint8_t PingMsg[] = "PING";
@@ -140,103 +154,126 @@
void OnRxError( void );
uint8_t lora_chongfuyingda_flag;
uint8_t Lora_rx_open_flag;
+extern u32 Loratx_frequency;
void LedToggle(void)
{
// HAL_GPIO_TogglePin(GPIOB, LED1_Pin);
}
-void Lora_tx_mode( void )
-{
- Radio.SetChannel( 470200000 );
- Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, 0,
- 7, LORA_CODINGRATE,LORA_PREAMBLE_LENGTH_T, LORA_FIX_LENGTH_PAYLOAD_ON,
- false, 0, 0, LORA_IQ_INVERSION_ON_T, 3000 );
+//void Lora_tx_mode( void )
+//{
+//Lora_status=LORA_TX_47X;
+// RadioEvents.TxDone = OnTxDone;
+// RadioEvents.RxDone = OnRxDone;
+// RadioEvents.TxTimeout = OnTxTimeout;
+// RadioEvents.RxTimeout = OnRxTimeout;
+// RadioEvents.RxError = OnRxError;
-}
-void Lora_rx_open( void )
-{
- if(Lora_rx_open_flag==1)
- {
- Lora_Init();
- Lora_rx_open_flag=0;
- }
- if(lora_yingda_flag&&lora_chongfuyingda_flag==0)
- {
- printf("Lora:%d %d\r\n",lora_yingda_flag,lora_chongfuyingda_flag);
- lora_chongfuyingda_flag=1;
- RadioEvents.TxDone = OnTxDone;
- RadioEvents.RxDone = OnRxDone;
- RadioEvents.TxTimeout = OnTxTimeout;
- RadioEvents.RxTimeout = OnRxTimeout;
- RadioEvents.RxError = OnRxError;
+// Radio.Init( &RadioEvents );
+// Radio.SetChannel( Loratx_frequency );
+//
+// Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, 2,
+// 7, LORA_CODINGRATE,LORA_PREAMBLE_LENGTH_T, LORA_FIX_LENGTH_PAYLOAD_ON,
+// false, 0, 0, LORA_IQ_INVERSION_ON_T, 3000 );
- Radio.Init( &RadioEvents );
- Radio.SetChannel( 500000000 );
- Radio.SetRxConfig( MODEM_LORA, 0, 7,
- LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH_R,
- LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
- 0, false, 0, 0, true, 1 );
+//}
+//void Lora_rx_open( void )
+//{
+// if(Lora_rx_open_flag==1)
+// {
+// Lora_Init();
+// Lora_rx_open_flag=0;
+// }
+// if(lora_yingda_flag&&lora_chongfuyingda_flag==0)
+// {
+// printf("Lora:%d %d\r\n",lora_yingda_flag,lora_chongfuyingda_flag);
+// lora_chongfuyingda_flag=1;
+// RadioEvents.TxDone = OnTxDone;
+// RadioEvents.RxDone = OnRxDone;
+// RadioEvents.TxTimeout = OnTxTimeout;
+// RadioEvents.RxTimeout = OnRxTimeout;
+// RadioEvents.RxError = OnRxError;
- SX126xClearIrqStatus( IRQ_RADIO_ALL );
-// Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
- Radio.Rx( RX_TIMEOUT_VALUE );
+// Radio.Init( &RadioEvents );
+// Radio.SetChannel( 500000000 );
+// Radio.SetRxConfig( MODEM_LORA, 0, 7,
+// LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH_R,
+// LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
+// 0, false, 0, 0, true, 1 );
-
- }
-}
+// SX126xClearIrqStatus( IRQ_RADIO_ALL );
+//// Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
+// Radio.Rx( RX_TIMEOUT_VALUE );
+
+//
+// }
+//}
+uint32_t lora_zhuangtai;
void OnTxDone( void )
{
- if(lora_yingda_num>1000)
- {
- lora_yingda_num=0;
- lora_yingda_flag=1;
- }
-
- if(lora_yingda_flag==0)
- Lora_rx_open_flag=1;
- else
- {}
-
+ LED_TB_OFF;
+ Radio.Standby();
+ Radio.Rx( RX_TIMEOUT_VALUE );
}
+
+extern uint32_t lp_time;
+uint32_t lora_txtime_old;
extern uint8_t frame_seq_nb2,rec_nearbase_num,ancidlist_num;
uint16_t RX_TIMEOUTs;
extern LPTIM_HandleTypeDef hlptim1;
uint16_t current_time,start_time,end_time;
uint16_t lora_recv_devid=0;
u32 id;
-void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr )
+extern uint8_t Lora_tx_ancnum;
+extern uint16_t Lora_tx_ancid[50];
+extern uint16_t Lora_tx_ancdist[50];
+uint8_t power_and_key=0;
+extern u8 battary,button;
+u8 lora_seq_nb2;
+extern uint8_t stationary_flag;
+extern uint8_t anjian_flag;
+void Lora_tx_zubao( void )
{
+ uint16_t checksum;
+ usart_send[2] = 0x22;//正常模式
+ usart_send[3] = 9+Lora_tx_ancnum*4;//数据段长度
+ memcpy(&usart_send[4],&dev_id,2);
+ usart_send[6] = lora_seq_nb2;//包序
+ power_and_key=stationary_flag<<1;//把按键跟静止2合1，发出去
+ power_and_key=power_and_key+anjian_flag;;
+ memcpy(usart_send+7,&bat_percent,1);
+ memcpy(usart_send+8,&power_and_key,1);
+ usart_send[9] = lora_yingda_flag;//lora等待应答位
+ usart_send[10] = Lora_tx_ancnum;
+// usart_send[9] = lora_yingda_flag;
+ memcpy(&usart_send[11],&Lora_tx_ancid,2*Lora_tx_ancnum);
+ memcpy(&usart_send[11+Lora_tx_ancnum*2],&Lora_tx_ancdist,2*Lora_tx_ancnum);
+ checksum = Checksum_u16(&usart_send[2],8+4*Lora_tx_ancnum);
+ memcpy(&usart_send[11+4*Lora_tx_ancnum],&checksum,2);
+}
+extern uint8_t lora_tx_flag;
+uint16_t current_count;
+u16 Lora_recevcount;
+extern uint16_t no_data_chongqi_num;
+void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr )
+{
+ if(Lora_status==LORA_RX_433)
+ {
+ Lora_recevcount=HAL_LPTIM_ReadCounter(&hlptim1);
+ Lora_recevcount=Lora_recevcount+197;//197代表6ms
+ if(Lora_recevcount>=32768)
+ {
+ Lora_recevcount -=32768;
+ }
+// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_SET);
BufferSize = size;
memcpy( RX_Buffer, payload, BufferSize );
RssiValue = rssi;
SnrValue = snr;
-
+ no_data_chongqi_num=0;
Radio.Standby();
- if(lora_yingda_flag)
- {
- memcpy(&lora_recv_devid,&RX_Buffer[4],2);
- if(lora_recv_devid==dev_id)
- {
-
-
- }
- }
- if(lora_yingda_flag==0)
- {
- lora_chongfuyingda_flag=0;
-// HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_SET);
-// Delay_Ms(10);
-// HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_RESET);
- uint16_t i=0;
- for(i=0;i<BufferSize;i++)
- {printf("RXD %d:\r\n",RX_Buffer[i]);}
- RX_TIMEOUTs++;
- printf("RX_num :%d\r\n",RX_TIMEOUTs);
-// start_time=HAL_LPTIM_ReadCounter(&hlptim1);
-// end_time=start_time+((32768/1000)*20);
-// if(end_time>=32768)
-// {end_time-=32768;}
-// current_time=HAL_LPTIM_ReadCounter(&hlptim1);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_SET);
+
HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_SET); //片选lora无效
id = dwt_readdevid() ;
@@ -251,121 +288,216 @@
}
}
//////// printf("Anchor_App\r\n");
+ current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+ while(current_count<Lora_recevcount||current_count>Lora_recevcount+16384)
+ {
+ current_count=HAL_LPTIM_ReadCounter(&hlptim1);
+ if(current_count<Lora_recevcount-300)
+ {
+ break;
+ }
+ }
+// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_RESET);
Anchor_App();
-
-
+// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_RESET);
HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_RESET); //片选lora有效
- delay_ms(10);
-
- Lora_tx_mode();
- Radio.Send( usart_send, 12+rec_nearbase_num*4);
- lora_yingda_num++;
-// printf("RX_TIMEOUTs :%d\r\n",RX_TIMEOUTs);
-// Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
-// printf("RX_TIMEOUTs :XXXX\r\n");
-// Radio.Rx( RX_TIMEOUT_VALUE );
-// printf("Slave TXD XXXX\r\n");
-
+ delay_ms(1);
+ Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
+ }
+ if(Lora_status==LORA_RX_47X)//。
+ {
+ BufferSize = size;
+ memcpy( RX_Buffer, payload, BufferSize );
+ RssiValue = rssi;
+ SnrValue = snr;
+ Radio.Standby();
+ if(RX_Buffer[0]==0x55&&RX_Buffer[1]==0xAA)
+ {
+ Lora433_change();
+ if(!memcmp(&g_com_map[DEV_ID],&RX_Buffer[4],2))
+ {Lora_rece_error=0;}
+ }
}
}
void OnTxTimeout( void )
{
-
+ Radio.Standby();
+ Lora433_change();
}
-
+ uint8_t tm;
+uint16_t Lora_rece_error;
void OnRxTimeout( void )
{
Radio.Standby();
- Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
- printf("slave OnRxTimeout\r\n");
-
+ if(Lora_status==LORA_RX_47X) //470rx超时，先调时间发送，5次后还不行，换频段
+ {
+ Lora_rece_error++;
+ if(Lora_rece_error>5)
+ {
+ Loratx_frequency=Loratx_frequency+1000000;
+ if(Loratx_frequency>474000000)
+ {Loratx_frequency=470000000;}
+ Lora_rece_error=0;
+ }
+ else
+ {
+ tm= (rand()%100);
+ SetNextPollTime(tm);
+// HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, tm);
+ }
+ }
+ Lora433_change();
}
void OnRxError( void )
{
Radio.Standby();
- if(EnableMaster)
- {
- TX_Buffer[0] = 'P';
- TX_Buffer[1] = 'I';
- TX_Buffer[2] = 'N';
- TX_Buffer[3] = 'G';
-
-// crc_value=RadioComputeCRC(TX_Buffer,4,CRC_TYPE_IBM);//计算得出要发送数据包CRC值
-// TX_Buffer[4]=crc_value>>8;
-// TX_Buffer[5]=crc_value;
- //Radio.Send( TX_Buffer, 6);
- Radio.Send( TX_Buffer, 4);
-// HAL_GPIO_WritePin( OUT1_GPIO_Port, OUT1_Pin,GPIO_PIN_SET);
-// HAL_Delay_nMS( 1 );
-// HAL_GPIO_WritePin( OUT1_GPIO_Port, OUT1_Pin,GPIO_PIN_RESET);
- printf("Master TXD PING!\r\n");
- }
- else
- {
- Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
- printf("slave OnRxError\r\n");
-// Radio.Rx( RX_TIMEOUT_VALUE );
-
- }
-
+ Lora433_change();
}
-void Lora_Init(void)
+//void Lora433rx_Init(void)
+//{
+// Lora_status=LORA_RX_433;
+// RadioEvents.TxDone = OnTxDone;
+// RadioEvents.RxDone = OnRxDone;
+// RadioEvents.TxTimeout = OnTxTimeout;
+// RadioEvents.RxTimeout = OnRxTimeout;
+// RadioEvents.RxError = OnRxError;
+// Radio.Init( &RadioEvents );
+// Radio.SetChannel( RF_FREQUENCY );
+
+//// Radio.SetStandby( STDBY_RC );
+//
+//// Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
+//// LORA_SPREADING_FACTOR, LORA_CODINGRATE,
+//// LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
+//// true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
+//
+//// Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
+//// LORA_SPREADING_FACTOR, LORA_CODINGRATE,
+//// LORA_PREAMBLE_LENGTH_T, LORA_FIX_LENGTH_PAYLOAD_ON,
+//// false, 0, 0, LORA_IQ_INVERSION_ON_T, 1000 );
+//
+//// Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, LORA_SPREADING_FACTOR,
+//// LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH,
+//// LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
+//// 0, true, 0, 0, LORA_IQ_INVERSION_ON, false );
+//// printf("Lora_Init1\r\n");
+// Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, LORA_SPREADING_FACTOR,
+// LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH_R,
+// LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
+// 0, false, 0, 0, LORA_IQ_INVERSION_ON_R, 1 );
+//
+//// Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, LORA_SPREADING_FACTOR,
+//// LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH,
+//// LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
+//// 0, false, 0, 0, LORA_IQ_INVERSION_ON, true );
+//
+
+
+// {
+//// SX126xClearIrqStatus( IRQ_RADIO_ALL );
+//// SX126xSetDioIrqParams( IRQ_RX_DONE | IRQ_CRC_ERROR,
+//// IRQ_RX_DONE | IRQ_CRC_ERROR,
+//// IRQ_RADIO_NONE, IRQ_RADIO_NONE
+//// );
+//// SX126xSetDioIrqParams( IRQ_RADIO_ALL, //IRQ_RX_DONE | IRQ_RX_TX_TIMEOUT,
+//// IRQ_RADIO_ALL, //IRQ_RX_DONE | IRQ_RX_TX_TIMEOUT,
+//// IRQ_RADIO_NONE,
+//// IRQ_RADIO_NONE );
+// Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
+//// Radio.Rx( RX_TIMEOUT_VALUE );
+//// printf("I am Slave!\r\n");
+// }
+//
+//}
+
+//void Lora47xrx_Init(void)
+//{ Lora_status=LORA_RX_47X;
+// RadioEvents.TxDone = OnTxDone;
+// RadioEvents.RxDone = OnRxDone;
+// RadioEvents.TxTimeout = OnTxTimeout;
+// RadioEvents.RxTimeout = OnRxTimeout;
+// RadioEvents.RxError = OnRxError;
+
+// Radio.Init( &RadioEvents );
+// Radio.SetChannel( Loratx_frequency );
+
+//
+// Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, 7,
+// LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH_R,
+// LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
+// 0, false, 0, 0, LORA_IQ_INVERSION_ON_R, 0 );
+//
+// {
+//// SX126xClearIrqStatus( IRQ_RADIO_ALL );
+
+//// Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
+// Radio.Rx( RX_TIMEOUT_VALUE );
+//// printf("I am Slave!\r\n");
+// }
+//
+//}
+void Lora47X_Init(void)
{
+ Lora_status=LORA_RX_47X;
RadioEvents.TxDone = OnTxDone;
RadioEvents.RxDone = OnRxDone;
RadioEvents.TxTimeout = OnTxTimeout;
RadioEvents.RxTimeout = OnRxTimeout;
RadioEvents.RxError = OnRxError;
-// printf("Lora_Init3\r\n");
+
+ Radio.Init( &RadioEvents );
+ Radio.SetChannel( Loratx_frequency );
+
+ Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, 2,
+ 7, LORA_CODINGRATE,LORA_PREAMBLE_LENGTH_T, LORA_FIX_LENGTH_PAYLOAD_ON,
+ false, 0, 0, LORA_IQ_INVERSION_ON_T, 3000 );
+
+ Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, 7,
+ LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH_R,
+ LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
+ 0, false, 0, 0, LORA_IQ_INVERSION_ON_R, 0 );
+}
+void Lora433_change(void)
+{
+ Lora_status=LORA_RX_433;
+// Radio.SetChannel( RF_FREQUENCY );
+// SX126x.ModulationParams.Params.LoRa.SpreadingFactor=5;
+// SX126x.ModulationParams.Params.LoRa.Bandwidth=2;
+// SX126x.ModulationParams.Params.LoRa.CodingRate=1;
+// SX126xSetModulationParams( &SX126x.ModulationParams );
+// Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
+//
+// Lora_status=LORA_RX_47X;
+ RadioEvents.TxDone = OnTxDone;
+ RadioEvents.RxDone = OnRxDone;
+ RadioEvents.TxTimeout = OnTxTimeout;
+ RadioEvents.RxTimeout = OnRxTimeout;
+ RadioEvents.RxError = OnRxError;
+
Radio.Init( &RadioEvents );
Radio.SetChannel( RF_FREQUENCY );
-
-// Radio.SetStandby( STDBY_RC );
-// Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
-// LORA_SPREADING_FACTOR, LORA_CODINGRATE,
-// LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
-// true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
-
-// Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
-// LORA_SPREADING_FACTOR, LORA_CODINGRATE,
-// LORA_PREAMBLE_LENGTH_T, LORA_FIX_LENGTH_PAYLOAD_ON,
-// false, 0, 0, LORA_IQ_INVERSION_ON_T, 1000 );
-
-// Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, LORA_SPREADING_FACTOR,
-// LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH,
-// LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
-// 0, true, 0, 0, LORA_IQ_INVERSION_ON, false );
-// printf("Lora_Init1\r\n");
+ Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, 2,
+ 5, LORA_CODINGRATE,LORA_PREAMBLE_LENGTH_T, LORA_FIX_LENGTH_PAYLOAD_ON,
+ false, 0, 0, LORA_IQ_INVERSION_ON_T, 3000 );
+
Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, LORA_SPREADING_FACTOR,
LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH_R,
LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
0, false, 0, 0, LORA_IQ_INVERSION_ON_R, 1 );
-// Radio.SetRxConfig( MODEM_LORA, LORA_BANDWIDTH, LORA_SPREADING_FACTOR,
-// LORA_CODINGRATE, 0, LORA_PREAMBLE_LENGTH,
-// LORA_SYMBOL_TIMEOUT, LORA_FIX_LENGTH_PAYLOAD_ON,
-// 0, false, 0, 0, LORA_IQ_INVERSION_ON, true );
-
-
-
- {
- SX126xClearIrqStatus( IRQ_RADIO_ALL );
-// SX126xSetDioIrqParams( IRQ_RX_DONE | IRQ_CRC_ERROR,
-// IRQ_RX_DONE | IRQ_CRC_ERROR,
-// IRQ_RADIO_NONE, IRQ_RADIO_NONE
-// );
-// SX126xSetDioIrqParams( IRQ_RADIO_ALL, //IRQ_RX_DONE | IRQ_RX_TX_TIMEOUT,
-// IRQ_RADIO_ALL, //IRQ_RX_DONE | IRQ_RX_TX_TIMEOUT,
-// IRQ_RADIO_NONE,
-// IRQ_RADIO_NONE );
- Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
-// Radio.Rx( RX_TIMEOUT_VALUE );
-// printf("I am Slave!\r\n");
- }
-
+ Radio.SetRxDutyCycle(RxDutyCycle_RX_time,RxDutyCycle_SLEEP_time);
+
}
+void Lora47X_change(void)
+{
+ Radio.SetChannel( Loratx_frequency );
+ SX126x.ModulationParams.Params.LoRa.SpreadingFactor=7;
+ SX126x.ModulationParams.Params.LoRa.Bandwidth=2;
+ SX126x.ModulationParams.Params.LoRa.CodingRate=1;
+ SX126xSetModulationParams( &SX126x.ModulationParams );
+}
\ No newline at end of file
--
Gitblit v1.9.3