From eeea481d10c49eeff6a2cafa9b49d4fce3ace8f8 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期五, 26 一月 2024 10:43:46 +0800
Subject: [PATCH] 1
---
Src/stm32l0xx_hal_msp.c | 185 +++++++++++++++++++++++++++++-----------------
1 files changed, 116 insertions(+), 69 deletions(-)
diff --git a/Src/stm32l0xx_hal_msp.c b/Src/stm32l0xx_hal_msp.c
index 8679ee3..796b71e 100644
--- a/Src/stm32l0xx_hal_msp.c
+++ b/Src/stm32l0xx_hal_msp.c
@@ -192,73 +192,6 @@
}
/**
-* @brief SPI MSP Initialization
-* This function configures the hardware resources used in this example
-* @param hspi: SPI handle pointer
-* @retval None
-*/
-void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
-{
- GPIO_InitTypeDef GPIO_InitStruct = {0};
- if(hspi->Instance==SPI1)
- {
- /* USER CODE BEGIN SPI1_MspInit 0 */
-
- /* USER CODE END SPI1_MspInit 0 */
- /* Peripheral clock enable */
- __HAL_RCC_SPI1_CLK_ENABLE();
-
- __HAL_RCC_GPIOA_CLK_ENABLE();
- /**SPI1 GPIO Configuration
- PA5 ------> SPI1_SCK
- PA6 ------> SPI1_MISO
- PA7 ------> SPI1_MOSI
- */
- GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /* USER CODE BEGIN SPI1_MspInit 1 */
-
- /* USER CODE END SPI1_MspInit 1 */
- }
-
-}
-
-/**
-* @brief SPI MSP De-Initialization
-* This function freeze the hardware resources used in this example
-* @param hspi: SPI handle pointer
-* @retval None
-*/
-void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
-{
- if(hspi->Instance==SPI1)
- {
- /* USER CODE BEGIN SPI1_MspDeInit 0 */
-
- /* USER CODE END SPI1_MspDeInit 0 */
- /* Peripheral clock disable */
- __HAL_RCC_SPI1_CLK_DISABLE();
-
- /**SPI1 GPIO Configuration
- PA5 ------> SPI1_SCK
- PA6 ------> SPI1_MISO
- PA7 ------> SPI1_MOSI
- */
- HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
-
- /* USER CODE BEGIN SPI1_MspDeInit 1 */
-
- /* USER CODE END SPI1_MspDeInit 1 */
- }
-
-}
-
-/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
* @param huart: UART handle pointer
@@ -267,7 +200,34 @@
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
- if(huart->Instance==USART1)
+ if(huart->Instance==LPUART1)
+ {
+ /* USER CODE BEGIN LPUART1_MspInit 0 */
+
+ /* USER CODE END LPUART1_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_LPUART1_CLK_ENABLE();
+
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ /**LPUART1 GPIO Configuration
+ PB10 ------> LPUART1_TX
+ PB11 ------> LPUART1_RX
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF4_LPUART1;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /* LPUART1 interrupt Init */
+ HAL_NVIC_SetPriority(LPUART1_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(LPUART1_IRQn);
+ /* USER CODE BEGIN LPUART1_MspInit 1 */
+
+ /* USER CODE END LPUART1_MspInit 1 */
+ }
+ else if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspInit 0 */
@@ -340,7 +300,27 @@
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
- if(huart->Instance==USART1)
+ if(huart->Instance==LPUART1)
+ {
+ /* USER CODE BEGIN LPUART1_MspDeInit 0 */
+
+ /* USER CODE END LPUART1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_LPUART1_CLK_DISABLE();
+
+ /**LPUART1 GPIO Configuration
+ PB10 ------> LPUART1_TX
+ PB11 ------> LPUART1_RX
+ */
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
+
+ /* LPUART1 interrupt DeInit */
+ HAL_NVIC_DisableIRQ(LPUART1_IRQn);
+ /* USER CODE BEGIN LPUART1_MspDeInit 1 */
+
+ /* USER CODE END LPUART1_MspDeInit 1 */
+ }
+ else if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspDeInit 0 */
@@ -367,6 +347,73 @@
}
+/**
+* @brief SPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(hspi->Instance==SPI1)
+ {
+ /* USER CODE BEGIN SPI1_MspInit 0 */
+
+ /* USER CODE END SPI1_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_SPI1_CLK_ENABLE();
+
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ /**SPI1 GPIO Configuration
+ PA5 ------> SPI1_SCK
+ PA6 ------> SPI1_MISO
+ PA7 ------> SPI1_MOSI
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN SPI1_MspInit 1 */
+
+ /* USER CODE END SPI1_MspInit 1 */
+ }
+
+}
+
+/**
+* @brief SPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
+{
+ if(hspi->Instance==SPI1)
+ {
+ /* USER CODE BEGIN SPI1_MspDeInit 0 */
+
+ /* USER CODE END SPI1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_SPI1_CLK_DISABLE();
+
+ /**SPI1 GPIO Configuration
+ PA5 ------> SPI1_SCK
+ PA6 ------> SPI1_MISO
+ PA7 ------> SPI1_MOSI
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
+
+ /* USER CODE BEGIN SPI1_MspDeInit 1 */
+
+ /* USER CODE END SPI1_MspDeInit 1 */
+ }
+
+}
+
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
--
Gitblit v1.9.3