From ef2519e856f324550def78ebdd57f2b7a8743e5d Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期五, 02 二月 2024 18:35:37 +0800
Subject: [PATCH] 初步开发完成
---
Src/main.c | 1327 +++++++++++++++++++++++++++++++++++++++------------------
1 files changed, 903 insertions(+), 424 deletions(-)
diff --git a/Src/main.c b/Src/main.c
index b937b7c..37f878a 100644
--- a/Src/main.c
+++ b/Src/main.c
@@ -17,7 +17,6 @@
******************************************************************************
*/
/* USER CODE END Header */
-
/* Includes ------------------------------------------------------------------*/
#include "main.h"
@@ -30,10 +29,26 @@
#include "TrackingDiff.h"
#include "dw_app.h"
#include "Flash.h"
+#include "user.h"
+#include "sx126x-board.h"
+#include "string.h"
+#include "stdio.h"
+#include "delay.h"
+#include <stdlib.h>
+#include "WS2812.h"
+#include "syn6288.h"
#define NSH1 0x0001
#define GP 0x0002
#define FLASH_HARDWARE_VERSION_MAP (uint32_t)0x08004F00 //硬件版本号和批次信息位置
//#define DEBUG_MODE
+uint8_t chongqi_flag;
+uint32_t uwbled,gpsled,loraled,powerled;
+UART_WakeUpTypeDef Selection;
+uint8_t Close_RMC[20]="$CCMSG,RMC,1,0,*04\r\n";
+uint8_t Close_GSA[20]="$CCMSG,GSA,1,0,*0D\r\n";
+uint8_t Close_GSV[20]="$CCMSG,GSV,1,0,*1A\r\n";
+uint8_t Close_GLL[20]="$CCMSG,GLL,1,0,*1F\r\n";
+uint8_t Close_TXT[20]="$CCMSG,TXT,1,0,*00\r\n";
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -53,17 +68,22 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
-ADC_HandleTypeDef hadc;
+ ADC_HandleTypeDef hadc;
+DMA_HandleTypeDef hdma_adc;
+
+IWDG_HandleTypeDef hiwdg;
LPTIM_HandleTypeDef hlptim1;
-SPI_HandleTypeDef hspi1;
-
-TIM_HandleTypeDef htim2;
-
+UART_HandleTypeDef hlpuart1;
UART_HandleTypeDef huart1;
+UART_HandleTypeDef huart5;
DMA_HandleTypeDef hdma_usart1_rx;
DMA_HandleTypeDef hdma_usart1_tx;
+DMA_HandleTypeDef hdma_usart5_rx;
+DMA_HandleTypeDef hdma_usart5_tx;
+
+SPI_HandleTypeDef hspi1;
/* USER CODE BEGIN PV */
@@ -72,12 +92,14 @@
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
+static void MX_DMA_Init(void);
+static void MX_ADC_Init(void);
+static void MX_IWDG_Init(void);
static void MX_LPTIM1_Init(void);
+static void MX_LPUART1_UART_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_SPI1_Init(void);
-static void MX_ADC_Init(void);
-static void MX_DMA_Init(void);
-static void MX_TIM2_Init(void);
+static void MX_USART5_UART_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@@ -91,10 +113,15 @@
extern u8 motor_state;
uint16_t tyncpoll_time,lpsettime;
uint16_t slottime,max_slotpos;
-uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time,current_time;
+uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time;
extern uint8_t module_power;
extern float nomove_count;
uint8_t imu_enable,motor_enable;
+uint32_t lp_time;
+extern uint32_t lora_txtime_old;
+uint8_t anjian_flag;
+uint8_t stationary_flag;
+uint16_t stationary_num;
u16 GetLPTime(void)
{
u16 count=HAL_LPTIM_ReadCounter(&hlptim1);
@@ -110,84 +137,94 @@
Error_Handler();
}
}
+void Usart5Init(void)
+{
+ MX_DMA_Init();
+ MX_USART5_UART_Init();
+}
+static void MX_DMA_DeInit(void)
+{
+
+ /* DMA controller clock enable */
+ __HAL_RCC_DMA1_CLK_DISABLE();
+
+ /* DMA interrupt init */
+ /* DMA1_Channel2_3_IRQn interrupt configuration */
+ // HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 1, 0);
+ HAL_NVIC_DisableIRQ(DMA1_Channel2_3_IRQn);
+
+}
+void UsartDeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ waitusart_timer = 0;
+ MX_DMA_DeInit();
+ HAL_UART_DeInit(&huart1);
+ GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
+void Usart5DeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ waitusart_timer = 0;
+// MX_DMA_DeInit();
+ HAL_UART_DeInit(&huart5);
+ GPIO_InitStruct.Pin = GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_2;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+}
+void LpusartDeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ waitusart_timer = 0;
+// MX_DMA_DeInit();
+ HAL_UART_DeInit(&hlpuart1);
+ GPIO_InitStruct.Pin = GPIO_PIN_2;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_3;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
uint16_t hardware_version,hardware_pici,hardware_type;
-uint8_t state5v;
+uint8_t state5v = 1;
+extern uint8_t du_flag;
+extern uint8_t xie_flag;
float motor_keeptime;
void IdleTask(void)
-{u16 current_time;
-
- UART_CheckReceive();
- UART_CheckSend();
-
-if(huart1.Instance->ISR&USART_ISR_FE)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
-//if(!HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
-//{
-// LED_TR_ON;
-// LED_TB_OFF;
-//}else{
-// LED_TR_OFF;
- current_time=GetLPTime();
- //motor_state=2;
-// if(g_com_map[MOTOR_ONTIME]>0)
-// {
-// g_com_map[MOTOR_ONTIME]--;
-// motor_state = 1;
-// }
-if(g_com_map[MOTOR_ENABLE])
{
-
-
- switch(motor_state)
- {case 0:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 1:
- if(current_time<MOTOR_ONTIME)
- {
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- }else{
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- }
- break;
- case 2:
- if(hardware_type==NSH1)
- {MOTOR_ON;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
- }
- break;
- case 3:
- if(hardware_type==NSH1)
- {MOTOR_OFF;
- }else if(hardware_type==GP)
- {
- HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
- }
- break;
- }
-}
+//if(huart1.Instance->ISR&USART_ISR_FE)
+// {
+// SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+//// }
+// if(du_flag==1)
+// {
+// du_flag=0;
+//
+// }
+// if(xie_flag==1)
+// {
+// xie_flag=0;
+// memcpy((uint8_t*)&g_com_map + pack_index, mUsartReceivePack, pack_datalen);
+// }
if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
{
+
+ UART_CheckReceive();
+ UART_CheckSend();
nomove_count = 0;
+ // bat_percent=Get_Battary();
if(state5v==0)
{
state5v=1;
@@ -195,53 +232,27 @@
}
if(bat_percent>99)
{
- LED_LR_OFF;
- LED_LG_ON;
+ powerled=GREEN;
+ Set4LEDColor(powerled,loraled,gpsled,uwbled);
}else{
- LED_LR_ON;
- LED_LG_OFF;
+ powerled=RED;
+ Set4LEDColor(powerled,loraled,gpsled,uwbled);
}
}else{
- state5v=0;
- LED_LR_OFF;
- LED_LG_OFF;
+ if(state5v==1)
+ {
+ state5v=0;
+ UsartDeInit();
+ }
+// powerled=LEDOFF;
+// Set4LEDColor(powerled,loraled,gpsled,uwbled);
+// gpsled=LEDOFF;
+// Set4LEDColor(powerled,loraled,gpsled,uwbled);
// }
}
- if(g_com_map[CNT_UPDATE]==1)
- {
- uint32_t result = 0;
- uint16_t tmp = 0xAAAA;
- __disable_irq();
- result = FLASH_Prepare(0x8004A38, 128);
- if(result)
- result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
- __enable_irq();
- printf("进入升级模式\r\n");
- g_com_map[CNT_UPDATE]=0;
- save_com_map_to_flash();
- delay_ms(100);
- // STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
- // Delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_REBOOT]==1)
+ if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
{
- g_com_map[CNT_REBOOT]=0;
- g_com_map[MAP_SIGN_INDEX]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[CNT_RESTART]==1)
- {
- g_com_map[CNT_RESTART]=0;
- save_com_map_to_flash();
- delay_ms(100);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
- }
- if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
- {
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+ SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
}
}
@@ -249,53 +260,83 @@
u16 total_slotnum,current_slotnum;
extern int32_t offsettimeus;
-
+//u16 last_lpcount = 0;
void SetNextPollTime(u16 time)
{
- int32_t lpcount,lptime,target_time;
+ int32_t lpcount1,lptime1,target_time1;
+int32_t last_lpcount1;
+// if(current_slotnum>=total_slotnum)
+// current_slotnum-=total_slotnum;
+//
+// target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
+// //if(target_time<90000)
+// {
+// lptime=target_time-offsettimeus;
+// lpcount = lptime/LPTIMER_LSB;
+// if(lpcount>LPTIMER_1S_COUNT)
+// lpcount-=LPTIMER_1S_COUNT;
+// if(lpcount<0)
+// {
+// lpcount+=LPTIMER_1S_COUNT;
+// }
+ last_lpcount1=HAL_LPTIM_ReadCounter(&hlptim1);
+ lpcount1 = last_lpcount1+32.768*time;
+ while(lpcount1>LPTIMER_1S_COUNT)
+ {
+ lpcount1-=LPTIMER_1S_COUNT;
+ }
+// last_lpcount = lpcount;
+ __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount1+32768);
- if(current_slotnum>=total_slotnum)
- current_slotnum-=total_slotnum;
-
- target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time)*1000;
- //if(target_time<90000)
- {
- lptime=target_time-offsettimeus;
- lpcount = lptime/LPTIMER_LSB;
- if(lpcount>LPTIMER_1S_COUNT)
- lpcount-=LPTIMER_1S_COUNT;
- if(lpcount<0)
- {
- lpcount+=LPTIMER_1S_COUNT;
- }
- __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
-}
}
-void HardWareTypeDiffConfig(void)
+/* 返回ch字符在sign数组中的序号 */
+int getIndexOfSigns(char ch)
{
-GPIO_InitTypeDef GPIO_InitStruct = {0};
-//hardware_type=2;
-if(hardware_type == 0)
- hardware_type = 1;
- switch(hardware_type)
- {
- case 1:
-
- HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
- GPIO_InitStruct.Pin = MOTOR_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- break;
- case 2:
- MX_TIM2_Init();
- //BarInit();
- break;
- }
+ if(ch >= '0' && ch <= '9')
+ {
+ return ch - '0';
+ }
+ if(ch >= 'A' && ch <='F')
+ {
+ return ch - 'A' + 10;
+ }
+ if(ch >= 'a' && ch <= 'f')
+ {
+ return ch - 'a' + 10;
+ }
+ return -1;
}
+/* 十六进制数转换为十进制数 */
+long hexToDec(char *source)
+{
+ long sum = 0;
+ long t = 1;
+ int i, len;
+
+ len = strlen(source);
+ for(i=len-1; i>=0; i--)
+ {
+ sum += t * getIndexOfSigns(*(source + i));
+ t *= 16;
+ }
+
+ return sum;
+}
+
+u32 Loratx_frequency;
u8 active_flag,nomovesleeptime;
+void GetLoratx_frequency(void)
+{
+Loratx_frequency=470000000;
+srand(HAL_LPTIM_ReadCounter(&hlptim1));
+ Loratx_frequency=((rand()%5)+470)*1000000;
+ if(470000000<=Loratx_frequency&&Loratx_frequency<480000000)
+ g_com_map[NEARBASE_ID1]=1136+(Loratx_frequency/1000000-470);
+ if(480000000<=Loratx_frequency&&Loratx_frequency<490000000)
+ g_com_map[NEARBASE_ID1]=1152+(Loratx_frequency/1000000-480);
+Loratx_frequency=470000000;
+}
void Program_Init(void)
{ float temp;
uint16_t temp2;
@@ -306,12 +347,25 @@
hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
//deca_sleep(1000);
- g_com_map[VERSION] = 0x011a;
+ g_com_map[VERSION] = (1<<8)|0;
+// g_com_map[DEV_ID]=1158;
+// #ifdef DEBUG_MODE
+// // g_com_map[GROUP_ID]=21;
+//// g_com_map[DEV_ID]=4;
+// // g_com_map[COM_INTERVAL]=100;
+// // g_com_map[MAX_REPORT_ANC_NUM]=1;
+// // g_com_map[NOMOVESLEEP_TIME]=10;
+// #endif
+ g_com_map[GROUP_ID]=5;
+// g_com_map[COM_INTERVAL] = 1000;
+ if(g_com_map[COM_INTERVAL]<1000)
+ {g_com_map[COM_INTERVAL] = 1000;}
active_flag = g_com_map[ACTIVE_INDEX];
- module_power = g_com_map[POWER];
+ module_power = g_com_map[POWER];
+ g_com_map[IMU_ENABLE] = 0;
imu_enable=g_com_map[IMU_ENABLE];
motor_enable=g_com_map[MOTOR_ENABLE];
-
+
group_id=g_com_map[GROUP_ID];
dev_id = g_com_map[DEV_ID];
slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
@@ -327,16 +381,11 @@
imu_enable=1;
nomovesleeptime =10;
}
-#ifdef DEBUG_MODE
-// g_com_map[DEV_ROLE]=1;
-// g_com_map[DEV_ID]=1;
- g_com_map[COM_INTERVAL]=100;
-// g_com_map[MAX_REPORT_ANC_NUM]=1;
- g_com_map[NOMOVESLEEP_TIME]=10;
-#endif
+
+ // g_com_map[COM_INTERVAL]=100;
if(g_com_map[COM_INTERVAL]==0)
{
- g_com_map[COM_INTERVAL]=100;
+ g_com_map[COM_INTERVAL]=1000;
}
if(module_power>67)
{module_power=67;}
@@ -344,17 +393,18 @@
{module_power=0;}
current_slotnum=1;
- current_time=GetLPTime();
- if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
+// current_time=GetLPTime();
+ if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, 0) != HAL_OK) //system time is 1010ms 1 puls=30.518us
{
Error_Handler();
}
+// if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, LPTIMER_1S_COUNT, slot_startcount) != HAL_OK) //system time is 1010ms 1 puls=30.518us
+// {
+// Error_Handler();
+// }
//g_com_map[NOMOVESLEEP_TIME]=5;
- printf("标签ID: %d .\r\n",dev_id);
- printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
- printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
-
-
+ printf("固件版本: URT-LORA-GPS版本 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
// printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
// printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -382,6 +432,308 @@
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
//SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
+}
+uint16_t temp2;
+float dw_vbat,last_vbat;
+uint8_t Get_Battary_UWB(void)
+{
+ static uint8_t first = 1;
+ static float last_value = 100;
+ static uint16_t bat_count = 0;
+ //if(bat_count++%600==0)
+ {
+ temp2=dwt_readtempvbat(1);
+ dw_vbat=(float)((temp2&0xff)-173)/173+3.3;
+ if(fabs(dw_vbat-dw_vbat)>0.2)
+ {
+ last_vbat = dw_vbat;
+ return last_value;
+ }
+ last_vbat = dw_vbat;
+ if(dw_vbat>=3.0)
+ {
+ if(first)
+ {
+ first = 0;
+ last_value =(dw_vbat-3.0)*167;//(bat_volt-3.5)/0.6*100
+ }
+ last_value = 0.9*last_value + (dw_vbat-3.0)*16.7;
+ if(last_value>100)
+ last_value = 100;
+ if(last_value<0)
+ last_value = 0;
+ }
+ }
+ return last_value;
+}
+void MX_ADC_DeInit(void)
+{
+ HAL_ADC_DeInit(&hadc);
+ HAL_ADCEx_DisableVREFINT();
+}
+uint16_t irq_num;
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ if(GPIO_Pin == RADIO_DIO1_Pin)
+ {
+ SystemClock_Config();
+// HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_SET);
+// HAL_GPIO_WritePin(RADIO_NSS_GPIO_Port, RADIO_NSS_Pin, GPIO_PIN_RESET); //片选lora有效
+// l_bIsVibration = HIDO_TRUE;
+// nomove_time=0;
+// printf("RXD :77777\r\n");
+ irq_num++;
+ RadioIrqProcess();
+ }
+ if(GPIO_Pin == GPIO_PIN_1)//按键
+ {
+ SystemClock_Config();
+ anjian_flag=1;
+ }
+ if(GPIO_Pin == GPIO_PIN_0)//加速度
+ {
+ SystemClock_Config();
+ stationary_flag =0;
+ stationary_num=0;
+ if(chongqi_flag==1)
+ {
+ HAL_NVIC_SystemReset();
+ }
+ }
+}
+extern void Lora_tx_zubao( void );
+extern void Lora_tx_mode( void );
+extern uint8_t Lora_tx_ancnum;
+extern u8 lora_seq_nb2;
+extern uint16_t lora_yingda_num;
+uint8_t lora_tx_flag;
+uint8_t lora_txanchor_power_flag;
+extern uint16_t Lora_tx_ancid[50];
+extern uint16_t Lora_tx_ancdist[50];
+extern uint8_t Lora_tx_anc_electricity[50];
+u8 lora_seq_nb1;
+static uint8_t send_frame1[EUART_RX_BUF_SIZE];
+uint8_t data_length1;
+void LoraSendComMap(uint8_t data_length, uint8_t index)
+{
+ uint16_t checksum = 0;
+ send_frame1[0] = 0x55;
+ send_frame1[1] = 0xAA;
+ send_frame1[2] = 0x39;
+ send_frame1[3] = data_length+5;
+ send_frame1[4] = 3;
+ send_frame1[5] = index;
+ send_frame1[6] = data_length;
+ memcpy(&send_frame1[7], &g_com_map[index], data_length);
+ for(int i = 0; i<(data_length+5); i++)
+ {
+ checksum += send_frame1[2+i];
+ }
+ checksum = Checksum_u16(&send_frame1[2],5+data_length);
+ memcpy(&send_frame1[7+data_length],&checksum,2);
+ data_length1=data_length+9;
+// UART_PushFrame(send_frame1, data_length+9);
+}
+extern uint8_t GPSchangdu;
+uint8_t no_yingdaflag;
+extern uint8_t GPS_GGAdate[200];
+uint8_t GPS_GGAdate111[200]="报警";
+void Lora_Tx_Poll()
+{
+
+ if(lora_tx_flag)
+ {
+ lora_tx_flag=0;
+// SYN_FrameInfo(0,GPS_GGAdate111);
+// while(1);
+ if(du_flag==1)
+ {
+ Lora47X_Init();
+ du_flag=0;
+ Radio.Send( send_frame1, data_length1);
+ no_yingdaflag=1;
+ }
+ else
+ {
+ Lora47X_Init();
+ if(bat_percent>20)
+ {
+ loraled=BLUE;
+// Set4LEDColor(powerled,loraled,gpsled,uwbled);
+ }
+ else
+ {
+ loraled=RED;
+// Set4LEDColor(powerled,loraled,gpsled,uwbled);
+ }
+ lora_seq_nb2++;
+ Lora_tx_zubao();
+ Radio.Send( usart_send, 15+Lora_tx_ancnum*4+GPSchangdu);
+ Lora_tx_ancnum=0;
+ GPSchangdu=0;
+ memset(Lora_tx_ancdist,0,sizeof(Lora_tx_ancdist));
+ memset(Lora_tx_ancid,0,sizeof(Lora_tx_ancid));
+ memset(GPS_GGAdate,0,sizeof(GPS_GGAdate));
+ anjian_flag=0;
+ // delay_ms(10);
+// loraled=LEDOFF;
+// Set4LEDColor(powerled,loraled,gpsled,uwbled);
+// HAL_UART_Transmit(&huart1,usart_send,15+Lora_tx_ancnum*4+GPSchangdu,3000);
+ }
+ }
+
+}
+void MX_ADC1_Init()
+{
+MX_ADC_Init();
+}
+void GPS_Close_Init()
+{
+
+ Delay_Ms(100);
+ HAL_UART_Transmit(&hlpuart1,Close_RMC,20,1000);
+ Delay_Ms(100);
+ HAL_UART_Transmit(&hlpuart1,Close_RMC,20,1000);
+ Delay_Ms(100);
+ HAL_UART_Transmit(&hlpuart1,Close_GSA,20,1000);
+ Delay_Ms(100);
+ HAL_UART_Transmit(&hlpuart1,Close_GSV,20,1000);
+ Delay_Ms(100);
+ HAL_UART_Transmit(&hlpuart1,Close_GLL,20,1000);
+ Delay_Ms(100);
+ HAL_UART_Transmit(&hlpuart1,Close_TXT,20,1000);
+ Delay_Ms(100);
+}
+extern uint16_t Lora_rece_error;
+extern uint16_t Beepchixutime;
+#define BleRxBufferSize 1
+uint8_t aRxBuffer[1],group_id,GPSRxBuffer[BleRxBufferSize];
+uint8_t ble_rx_success_flag;
+uint8_t fangzhijinrushuimian_flag;
+uint8_t GPS_zhongzhuandate[200];
+uint8_t GPS_zhongzhuannum;
+uint8_t GPSchangdu;
+uint8_t GPS_GGAdate[200]={1,2,3,4,5,6,7,8,9};
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+ {
+ GPS_zhongzhuandate[GPS_zhongzhuannum]=GPSRxBuffer[0];
+ GPS_zhongzhuannum++;
+ if(GPS_zhongzhuandate[GPS_zhongzhuannum-1]==0x0A&&GPS_zhongzhuandate[GPS_zhongzhuannum-2]==0x0D)
+ {
+// HAL_UART_Transmit(&hlpuart1,ble_rxdate,5,1000);
+ memcpy(GPS_GGAdate,GPS_zhongzhuandate,GPS_zhongzhuannum);
+ GPSchangdu= GPS_zhongzhuannum;
+ memset(GPS_zhongzhuandate,0,sizeof(GPS_zhongzhuandate));
+ GPS_zhongzhuannum=0;
+ fangzhijinrushuimian_flag=0;
+ ble_rx_success_flag=1;
+ if(GPSchangdu>40)
+ {
+ gpsled=BLUE;
+// Set4LEDColor(powerled,loraled,gpsled,uwbled);
+ }
+ else
+ {
+ gpsled=RED;
+// Set4LEDColor(powerled,loraled,gpsled,uwbled);
+ }
+ }
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)GPSRxBuffer, 1);
+ }
+}
+uint8_t ble_rxdate111[3]={0x11,0x22,0x33};
+void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart)
+{
+ SystemClock_Config();
+// HAL_UART_Transmit(&hlpuart1,(uint8_t*)ble_rxdate111,3,1000);
+//// huart->RxState = HAL_UART_STATE_BUSY_RX;
+// ble_rxzhongzhuandate[ble_zhongzhuannum]=BleRxBuffer[0];
+// ble_zhongzhuannum++;
+// if(ble_rxzhongzhuandate[ble_zhongzhuannum-1]==0x0A&&ble_rxzhongzhuandate[ble_zhongzhuannum-2]==0x0D)
+// {
+// ble_zhongzhuannum=0;
+// memcpy(ble_rxdate,ble_rxzhongzhuandate,50);
+// memset(ble_rxzhongzhuandate,0,sizeof(ble_rxzhongzhuandate));
+// }
+// if(lp_time>3)
+ fangzhijinrushuimian_flag=1;
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)GPSRxBuffer, 1);
+// HAL_UART_Transmit(&hlpuart1,ble_rxdate,2,1000);
+}
+//void GPS_rx_Poll()
+//{
+// if(ble_rx_success_flag)
+// {
+// ble_rx_success_flag=0;
+// }
+//}
+extern uint8_t yuyin_no_sleep_flag;
+extern uint8_t yuyin_sendflag;
+extern uint8_t xiafayuyin_data[200];
+extern uint8_t yuyinzidongguan_time;
+uint8_t yuyin_yinliang[10]={0X5B,0X76,0X31,0X30,0X5D};//音量等级V10
+void TTSchaxun_Busy(void)
+{
+ if(yuyin_sendflag)
+ {
+ yuyin_sendflag=0;
+ SYN_FrameInfo(0,yuyin_yinliang);//设置音量等级V10
+ delay_ms(10);
+ SYN_FrameInfo(0,xiafayuyin_data); //播放内容
+// HAL_UART_Receive_IT(&huart6, &Get_Uart6_data, 1);
+ memset(xiafayuyin_data,0,sizeof(xiafayuyin_data));
+ }
+// if(Get_Uart6_data==0x4F)
+// {
+//HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_RESET);
+//HAL_GPIO_WritePin(GPIOC, GPIO_PIN_12, GPIO_PIN_RESET);
+// Get_Uart6_data=0;
+// }
+}
+void PowerDownDetect(void)
+{
+ static uint32_t l_u32QXpowerTick = 0;
+static uint32_t powercount=0;
+ if(HAL_GPIO_ReadPin(GPIOB,GPIO_PIN_12))
+ {
+ delay_ms(1000);
+ if(HAL_GPIO_ReadPin(GPIOB,GPIO_PIN_12))
+ {
+ while(1)
+ {
+ if(HAL_GPIO_ReadPin(GPIOB,GPIO_PIN_12)==0)
+ {
+ delay_ms(100);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_RESET);
+ }
+ }
+ }
+ }
+}
+uint8_t usart5_state;
+void Jingzhi_Poll(void)
+{
+ powerled=LEDOFF;
+ loraled=LEDOFF;
+ gpsled=LEDOFF;
+ uwbled=LEDOFF;
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET); //GuanGPS and lora 电源
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_RESET); //guan uwb 电源
+ HAL_SPI_DeInit(&hspi1);
+ HAL_GPIO_WritePin( RADIO_NSS_GPIO_Port, RADIO_NSS_Pin,GPIO_PIN_RESET);//lora cs
+ HAL_GPIO_WritePin( GPIOA, GPIO_PIN_4,GPIO_PIN_RESET);//uwb cs
+ HAL_GPIO_WritePin( GPIOC, GPIO_PIN_3,GPIO_PIN_RESET);//LORA REST
+ Usart5DeInit();
+ LpusartDeInit();
+ HAL_ADC_DeInit(&hadc);
+// __HAL_RCC_GPIOA_CLK_DISABLE();
+// __HAL_RCC_GPIOB_CLK_DISABLE();
+// __HAL_RCC_GPIOC_CLK_DISABLE();
+// __HAL_RCC_GPIOD_CLK_DISABLE();
+// __HAL_RCC_GPIOE_CLK_DISABLE();
+ Set4LEDColor_Off(); //关led总电源
+ chongqi_flag=1;
}
/* USER CODE END 0 */
@@ -413,33 +765,47 @@
/* Initialize all configured peripherals */
MX_GPIO_Init();
+ MX_DMA_Init();
+ MX_ADC_Init();
+// MX_IWDG_Init();
MX_LPTIM1_Init();
- MX_DMA_Init();
+ MX_LPUART1_UART_Init();
MX_USART1_UART_Init();
MX_SPI1_Init();
- MX_ADC_Init();
-
-// MX_TIM2_Init();
+ MX_USART5_UART_Init();
/* USER CODE BEGIN 2 */
- LED_LG_ON;
- Program_Init();
- LIS3DH_Data_Init();
- Dw1000_Init();
- Dw1000_App_Init();
- HardWareTypeDiffConfig();
- dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
- dwt_entersleep();
- waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
- DW_DISABLE;
- if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
- {
- Error_Handler();
- }
-// HAL_Delay(2000);
-// mcu_sleep();
- //LED0_BLINK;
-// SystemPower_Config();
-//HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+// LED_LG_ON;
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_SET); //开GPS电源
+ delay_ms(10);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_15, GPIO_PIN_SET); //开uwb电源
+//delay_ms(1000);
+
+ Program_Init();
+ LIS3DH_Data_Init();
+ Dw1000_Init();
+ Dw1000_App_Init();
+ // HardWareTypeDiffConfig();
+ dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
+ dwt_entersleep();
+ if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
+ {
+ Error_Handler();
+ }
+ Delay_Ms(2);
+ Delay_Ms(10);
+ bat_percent=Get_VDDVlotage();
+ GetLoratx_frequency();
+ delay_ms(2000);
+ GPS_Close_Init();
+
+ HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)GPSRxBuffer, 1);
+ Set4LEDColor(RED,RED,RED,RED);
+ HAL_Delay(500);
+ Set4LEDColor(GREEN,GREEN,GREEN,GREEN);
+ HAL_Delay(500);
+ Set4LEDColor_Off();
+// Lora47X_Init();
+// Radio.Sleep();
/* USER CODE END 2 */
/* Infinite loop */
@@ -449,52 +815,48 @@
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
- if(g_start_send_flag&&active_flag)
- { static uint16_t blink_count=0;
- SystemClock_Config();
- g_start_send_flag = 0;
-
-// if(current_count>slot_startcount&¤t_count<slot_startcount+interval_count)
-// {
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
-// }else{
-// HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
-// }
-// LED_TR_BLINK;s
-
- bat_percent=Get_Battary();
- if(bat_percent>15)
- { LED_TB_ON;
- Tag_App();
- LED_TB_OFF;
- }else{
- LED_TR_ON;
- Tag_App();
- LED_TR_OFF;
- }
- //LED0_BLINK;
- IdleTask();
- if(waitusart_timer>0)
- {
- waitusart_timer--;
- }
- if(m_bEUARTTxEn==0&&waitusart_timer==0&&(motor_state==0||motor_state==3))
- {
-#ifndef DEBUG_MODE
-if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-#endif
- }
-
-
- }else{
- IdleTask();
- }
+//Lora_rx_open();
+// Lora_Tx_Poll();
+ if(stationary_flag==1)
+ {
+ Jingzhi_Poll();
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ }
+ else
+ {
+ Lora_Tx_Poll();
+ IdleTask();
+ TTSchaxun_Busy();
+ PowerDownDetect();
+
+// Ble_rx_Poll();
+// HAL_IWDG_Refresh(&hiwdg);
-// HAL_Delay(100);
- // Get_Battary();
+// Lora_rece_error=0;
+// Radio.IrqProcess( ); // Process Radio IRQ
+// Anchor_App();
- // LIS3DH_Data_Init();
+ #ifndef DEBUG_MODE
+ if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
+ {
+ if(fangzhijinrushuimian_flag==0&&yuyin_no_sleep_flag==0)
+ {
+ if(usart5_state==0)
+ {
+ usart5_state=1;
+ Usart5DeInit();
+ }
+ Selection.WakeUpEvent = UART_WAKEUP_ON_STARTBIT;
+ HAL_UARTEx_EnableClockStopMode(&hlpuart1);
+ HAL_UARTEx_EnableStopMode( &hlpuart1 );
+ HAL_UARTEx_StopModeWakeUpSourceConfig( &hlpuart1, Selection );
+ __HAL_UART_ENABLE_IT(&hlpuart1, UART_IT_WUF);
+ Set4LEDColor_Off();
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+ }
+ }
+ #endif
+ }
}
/* USER CODE END 3 */
}
@@ -512,16 +874,21 @@
/** Configure the main internal regulator output voltage
*/
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
/** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
- /** Initializes the CPU, AHB and APB busses clocks
+
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
*/
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI
+ |RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLLMUL_4;
@@ -530,7 +897,8 @@
{
Error_Handler();
}
- /** Initializes the CPU, AHB and APB busses clocks
+
+ /** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@@ -543,8 +911,10 @@
{
Error_Handler();
}
- PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_LPTIM1;
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_LPUART1
+ |RCC_PERIPHCLK_LPTIM1;
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
+ PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_LSE;
PeriphClkInit.LptimClockSelection = RCC_LPTIM1CLKSOURCE_LSE;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -570,13 +940,14 @@
/* USER CODE BEGIN ADC_Init 1 */
/* USER CODE END ADC_Init 1 */
+
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
*/
hadc.Instance = ADC1;
hadc.Init.OversamplingMode = DISABLE;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
- hadc.Init.SamplingTime = ADC_SAMPLETIME_160CYCLES_5;
+ hadc.Init.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.ContinuousConvMode = DISABLE;
@@ -593,6 +964,7 @@
{
Error_Handler();
}
+
/** Configure for the selected ADC regular channel to be converted.
*/
sConfig.Channel = ADC_CHANNEL_1;
@@ -601,9 +973,47 @@
{
Error_Handler();
}
+
+ /** Configure for the selected ADC regular channel to be converted.
+ */
+ sConfig.Channel = ADC_CHANNEL_VREFINT;
+ if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
/* USER CODE BEGIN ADC_Init 2 */
-HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
+ HAL_ADCEx_EnableVREFINT();
+ HAL_ADCEx_Calibration_Start(&hadc,ADC_SINGLE_ENDED);
/* USER CODE END ADC_Init 2 */
+
+}
+
+/**
+ * @brief IWDG Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_IWDG_Init(void)
+{
+
+ /* USER CODE BEGIN IWDG_Init 0 */
+
+ /* USER CODE END IWDG_Init 0 */
+
+ /* USER CODE BEGIN IWDG_Init 1 */
+
+ /* USER CODE END IWDG_Init 1 */
+ hiwdg.Instance = IWDG;
+ hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
+ hiwdg.Init.Window = 4095;
+ hiwdg.Init.Reload = 4095;
+ if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN IWDG_Init 2 */
+
+ /* USER CODE END IWDG_Init 2 */
}
@@ -634,112 +1044,42 @@
Error_Handler();
}
/* USER CODE BEGIN LPTIM1_Init 2 */
-// if (HAL_LPTIM_TimeOut_Start_IT(&hlptim1, Period, Timeout) != HAL_OK)
-// {
-// Error_Handler();
-// }
+
/* USER CODE END LPTIM1_Init 2 */
}
/**
- * @brief SPI1 Initialization Function
+ * @brief LPUART1 Initialization Function
* @param None
* @retval None
*/
-static void MX_SPI1_Init(void)
+static void MX_LPUART1_UART_Init(void)
{
- /* USER CODE BEGIN SPI1_Init 0 */
+ /* USER CODE BEGIN LPUART1_Init 0 */
- /* USER CODE END SPI1_Init 0 */
+ /* USER CODE END LPUART1_Init 0 */
- /* USER CODE BEGIN SPI1_Init 1 */
+ /* USER CODE BEGIN LPUART1_Init 1 */
- /* USER CODE END SPI1_Init 1 */
- /* SPI1 parameter configuration*/
- hspi1.Instance = SPI1;
- hspi1.Init.Mode = SPI_MODE_MASTER;
- hspi1.Init.Direction = SPI_DIRECTION_2LINES;
- hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
- hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
- hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
- hspi1.Init.NSS = SPI_NSS_SOFT;
- hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
- hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
- hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
- hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
- hspi1.Init.CRCPolynomial = 7;
- if (HAL_SPI_Init(&hspi1) != HAL_OK)
+ /* USER CODE END LPUART1_Init 1 */
+ hlpuart1.Instance = LPUART1;
+ hlpuart1.Init.BaudRate = 9600;
+ hlpuart1.Init.WordLength = UART_WORDLENGTH_8B;
+ hlpuart1.Init.StopBits = UART_STOPBITS_1;
+ hlpuart1.Init.Parity = UART_PARITY_NONE;
+ hlpuart1.Init.Mode = UART_MODE_TX_RX;
+ hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ if (HAL_UART_Init(&hlpuart1) != HAL_OK)
{
Error_Handler();
}
- /* USER CODE BEGIN SPI1_Init 2 */
-__HAL_SPI_ENABLE(&hspi1);
- /* USER CODE END SPI1_Init 2 */
+ /* USER CODE BEGIN LPUART1_Init 2 */
-}
-
-/**
- * @brief TIM2 Initialization Function
- * @param None
- * @retval None
- */
-static void MX_TIM2_Init(void)
-{
-
- /* USER CODE BEGIN TIM2_Init 0 */
-
- /* USER CODE END TIM2_Init 0 */
-
- TIM_ClockConfigTypeDef sClockSourceConfig = {0};
- TIM_MasterConfigTypeDef sMasterConfig = {0};
- TIM_OC_InitTypeDef sConfigOC = {0};
-
- /* USER CODE BEGIN TIM2_Init 1 */
-
- /* USER CODE END TIM2_Init 1 */
- htim2.Instance = TIM2;
- htim2.Init.Prescaler = 9;
- htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
- htim2.Init.Period = 1171;
- htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
- htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
- if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
- {
- Error_Handler();
- }
- if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
- {
- Error_Handler();
- }
- sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
- sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
- if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
- {
- Error_Handler();
- }
- sConfigOC.OCMode = TIM_OCMODE_PWM1;
- sConfigOC.Pulse = 599;
- sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
- if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
- {
- Error_Handler();
- }
- /* USER CODE BEGIN TIM2_Init 2 */
-//if(HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3) != HAL_OK)
-// {
-// /* Starting Error */
-// Error_Handler();
-// }
- /* USER CODE END TIM2_Init 2 */
- HAL_TIM_MspPostInit(&htim2);
+ /* USER CODE END LPUART1_Init 2 */
}
@@ -791,6 +1131,81 @@
}
/**
+ * @brief USART5 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_USART5_UART_Init(void)
+{
+
+ /* USER CODE BEGIN USART5_Init 0 */
+
+ /* USER CODE END USART5_Init 0 */
+
+ /* USER CODE BEGIN USART5_Init 1 */
+
+ /* USER CODE END USART5_Init 1 */
+ huart5.Instance = USART5;
+ huart5.Init.BaudRate = 9600;
+ huart5.Init.WordLength = UART_WORDLENGTH_8B;
+ huart5.Init.StopBits = UART_STOPBITS_1;
+ huart5.Init.Parity = UART_PARITY_NONE;
+ huart5.Init.Mode = UART_MODE_TX_RX;
+ huart5.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ huart5.Init.OverSampling = UART_OVERSAMPLING_16;
+ huart5.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ huart5.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT|UART_ADVFEATURE_DMADISABLEONERROR_INIT;
+ huart5.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
+ huart5.AdvancedInit.DMADisableonRxError = UART_ADVFEATURE_DMA_DISABLEONRXERROR;
+ if (HAL_UART_Init(&huart5) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN USART5_Init 2 */
+
+ /* USER CODE END USART5_Init 2 */
+
+}
+
+/**
+ * @brief SPI1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_SPI1_Init(void)
+{
+
+ /* USER CODE BEGIN SPI1_Init 0 */
+
+ /* USER CODE END SPI1_Init 0 */
+
+ /* USER CODE BEGIN SPI1_Init 1 */
+
+ /* USER CODE END SPI1_Init 1 */
+ /* SPI1 parameter configuration*/
+ hspi1.Instance = SPI1;
+ hspi1.Init.Mode = SPI_MODE_MASTER;
+ hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+ hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
+ hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
+ hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
+ hspi1.Init.NSS = SPI_NSS_SOFT;
+ hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+ hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
+ hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+ hspi1.Init.CRCPolynomial = 7;
+ if (HAL_SPI_Init(&hspi1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN SPI1_Init 2 */
+__HAL_SPI_ENABLE(&hspi1);
+ /* USER CODE END SPI1_Init 2 */
+
+}
+
+/**
* Enable DMA controller clock
*/
static void MX_DMA_Init(void)
@@ -800,9 +1215,15 @@
__HAL_RCC_DMA1_CLK_ENABLE();
/* DMA interrupt init */
+ /* DMA1_Channel1_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
/* DMA1_Channel2_3_IRQn interrupt configuration */
HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);
+ /* DMA1_Channel4_5_6_7_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(DMA1_Channel4_5_6_7_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(DMA1_Channel4_5_6_7_IRQn);
}
@@ -820,18 +1241,35 @@
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, SCL_Pin|SDA_Pin|SPI_CS_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13|GPIO_PIN_7|GPIO_PIN_8, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, BAT_MEAS_GND_Pin|PWR_CTL_Pin, GPIO_PIN_SET);
+ HAL_GPIO_WritePin(GPIOC, RADIO_NSS_Pin|RADIO_nRESET_Pin|GPIO_PIN_4, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|LED2_R_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_4|GPIO_PIN_8, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
- HAL_GPIO_WritePin(GPIOA, DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5
+ |GPIO_PIN_7, GPIO_PIN_RESET);
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_10|SCL_Pin|SDA_Pin|GPIO_PIN_6, GPIO_PIN_SET);
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12|GPIO_PIN_15, GPIO_PIN_RESET);
+
+ /*Configure GPIO pins : PC13 RADIO_NSS_Pin RADIO_nRESET_Pin PC4
+ PC7 PC8 */
+ GPIO_InitStruct.Pin = GPIO_PIN_13|RADIO_NSS_Pin|RADIO_nRESET_Pin|GPIO_PIN_4
+ |GPIO_PIN_7|GPIO_PIN_8;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/*Configure GPIO pin : PA0 */
GPIO_InitStruct.Pin = GPIO_PIN_0;
@@ -839,62 +1277,72 @@
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- /*Configure GPIO pins : SCL_Pin SDA_Pin */
- GPIO_InitStruct.Pin = SCL_Pin|SDA_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- /*Configure GPIO pin : SPI_CS_Pin */
- GPIO_InitStruct.Pin = SPI_CS_Pin;
+ /*Configure GPIO pin : PA4 */
+ GPIO_InitStruct.Pin = GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
- HAL_GPIO_Init(SPI_CS_GPIO_Port, &GPIO_InitStruct);
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- /*Configure GPIO pin : BAT_MEAS_GND_Pin */
- GPIO_InitStruct.Pin = BAT_MEAS_GND_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
- HAL_GPIO_Init(BAT_MEAS_GND_GPIO_Port, &GPIO_InitStruct);
-
- /*Configure GPIO pin : USER_KEY_Pin */
- GPIO_InitStruct.Pin = USER_KEY_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
- GPIO_InitStruct.Pull = GPIO_PULLUP;
- HAL_GPIO_Init(USER_KEY_GPIO_Port, &GPIO_InitStruct);
-
- /*Configure GPIO pin : INPUT_5V_Pin */
- GPIO_InitStruct.Pin = INPUT_5V_Pin;
- GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = GPIO_PULLDOWN;
- HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
-
- /*Configure GPIO pins : LED1_G_Pin LED1_R_Pin LED2_R_Pin PWR_CTL_Pin */
- GPIO_InitStruct.Pin = LED1_G_Pin|LED1_R_Pin|LED2_R_Pin|PWR_CTL_Pin;
+ /*Configure GPIO pins : PB0 PB2 PB10 PB4
+ PB5 PB6 PB7 */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_10|GPIO_PIN_4
+ |GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- /*Configure GPIO pins : DW_WKUP_Pin DW_CTRL_Pin LED2_G_Pin */
- GPIO_InitStruct.Pin = DW_WKUP_Pin|DW_CTRL_Pin|LED2_G_Pin;
+ /*Configure GPIO pin : PB1 */
+ GPIO_InitStruct.Pin = GPIO_PIN_1;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : PB12 */
+ GPIO_InitStruct.Pin = GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : SCL_Pin SDA_Pin */
+ GPIO_InitStruct.Pin = SCL_Pin|SDA_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : PC6 RADIO_BUSY_Pin */
+ GPIO_InitStruct.Pin = GPIO_PIN_6|RADIO_BUSY_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : PA8 PA12 PA15 */
+ GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_12|GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- /*Configure GPIO pin : PWR_ON_Pin */
- GPIO_InitStruct.Pin = PWR_ON_Pin;
+ /*Configure GPIO pin : RADIO_DIO1_Pin */
+ GPIO_InitStruct.Pin = RADIO_DIO1_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(RADIO_DIO1_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : INPUT_5V_Pin */
+ GPIO_InitStruct.Pin = INPUT_5V_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
- GPIO_InitStruct.Pull = GPIO_PULLUP;
- HAL_GPIO_Init(PWR_ON_GPIO_Port, &GPIO_InitStruct);
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(INPUT_5V_GPIO_Port, &GPIO_InitStruct);
/* EXTI interrupt init*/
- HAL_NVIC_SetPriority(EXTI0_1_IRQn, 1, 0);
+ HAL_NVIC_SetPriority(EXTI0_1_IRQn, 2, 0);
HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);
+
+ HAL_NVIC_SetPriority(EXTI4_15_IRQn, 2, 0);
+ HAL_NVIC_EnableIRQ(EXTI4_15_IRQn);
}
@@ -923,48 +1371,81 @@
/*Enter the Standby mode*/
HAL_PWR_EnterSTANDBYMode();
}
-extern uint8_t tx_near_msg[80],stationary_flag;
+extern uint8_t tx_near_msg[80];
float key_keeptime;
+extern float freqlost_count,range_lost_time;
+extern uint8_t lora_yingda_flag;
+uint8_t lora_yingdatime;
+extern uint8_t lora_chongfuyingda_flag;
+uint16_t no_data_chongqi_num;
+uint16_t anchor_send_num;
+uint8_t no_yingdatime;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
- static uint8_t i=0;
- i++;
- g_start_send_flag=1;
- current_slotnum++;
- SetNextPollTime(tyncpoll_time);
- nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
- if(motor_keeptime>0)
- {
- motor_keeptime-=(float)g_com_map[COM_INTERVAL]/1000;
- }
- if(!GET_USERKEY)
- {
- key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
- if(key_keeptime>=KEY_KEEPRESET_TIME)
- {
- g_com_map[ACTIVE_INDEX]=!active_flag;
- save_com_map_to_flash();
- MOTOR_ON;
- HAL_Delay(2000);
- SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
- }
- }else{
- key_keeptime=0;
- }
- if(nomove_count>STATIONARY_TIME)
- {
- stationary_flag = 1;
- }else{
- stationary_flag = 0;
- }
-if(nomove_count>=nomovesleeptime-1&&imu_enable)
- {
- tx_near_msg[TAGSTATE] = tx_near_msg[TAGSTATE]|GOINGSLEEPBIT;
- }
- if(nomove_count>nomovesleeptime&&imu_enable)
- {
- mcu_sleep();
- }
+// uint8_t pinlv;
+ SystemClock_Config();
+ lp_time++;
+ anchor_send_num++;
+ no_data_chongqi_num++;
+ stationary_num++;
+ Set4LEDColor(powerled,loraled,gpsled,uwbled);
+// if(Beepchixutime>0)
+// {
+// Beepchixutime--;
+// if(Beepchixutime==0)
+// {Beep_Off();}
+// }
+ if(no_yingdaflag==1)
+ {
+ no_yingdatime++;
+ if(no_yingdatime>=5)
+ {
+ no_yingdaflag=0;
+ no_yingdatime=0;
+ }
+ }
+
+ if( no_data_chongqi_num>600)
+ {NVIC_SystemReset();}
+ SetNextPollTime(0);
+// if(lora_yingda_flag)
+// {
+// lora_yingdatime++;
+// if(lora_yingdatime>=2)
+// {lora_yingdatime=0;
+// lora_yingda_flag=0;
+// Lora_tx_mode();
+// Radio.Send( usart_send, 2);
+// }
+// }
+// else
+// {
+// pinlv=g_com_map[COM_MAP_SIZE]/1000;
+ if(lp_time%(g_com_map[COM_INTERVAL]/1000)==0)
+ {
+ lora_tx_flag=1;
+ lora_txanchor_power_flag=0;
+// }
+ if(anchor_send_num>=3600)
+ {anchor_send_num=0;
+ lora_txanchor_power_flag=1;
+ lora_tx_flag=0;
+ bat_percent=Get_VDDVlotage();
+ }
+ }
+
+ if(stationary_num>=30)
+ {stationary_num=0;
+ stationary_flag=1;
+ }
+ yuyinzidongguan_time++;
+ if(yuyinzidongguan_time>10)
+ {
+ yuyinzidongguan_time=0;
+ HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_RESET);
+ HAL_GPIO_WritePin(GPIOC, GPIO_PIN_12, GPIO_PIN_RESET);
+ yuyin_no_sleep_flag=0;
+ }
}
/* USER CODE END 4 */
@@ -996,5 +1477,3 @@
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.3