# Licensed to the Apache Software Foundation (ASF) under one # or more contributor license agreements. See the NOTICE file # distributed with this work for additional information # regarding copyright ownership. The ASF licenses this file # to you under the Apache License, Version 2.0 (the # "License"); you may not use this file except in compliance # with the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, # software distributed under the License is distributed on an # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, either express or implied. See the License for the # specific language governing permissions and limitations # under the License. # syscfg.defs: BSP_NRF52: description: 'Set to indicate that BSP has NRF52' value: 1 SOFT_PWM: description: 'Enable soft PWM' value: 0 ENC_FLASH_DEV: description: 'Encrypting flash driver over interal flash for testing' value: 0 UARTBB_0: description: 'Enable bit-banger UART 0' value: 0 RAM_RESIDENT: description: 'Compile app to be loaded to RAM' value: 0 syscfg.vals: HAL_SBRK: 0 OS_TICKS_PER_SEC: 1024 OS_MAIN_STACK_SIZE: 8000 MCU_TIMER_POLLER_PRIO: 0 BLE_LL_PRIO: 1 MCU_UART_POLLER_PRIO: 9 # Enable nRF52832 MCU MCU_TARGET: nRF52832 # Set default pins for peripherals UART_0_PIN_TX: 6 UART_0_PIN_RX: 8 UART_0_PIN_RTS: 5 UART_0_PIN_CTS: 7 SPI_0_MASTER_PIN_SCK: 23 SPI_0_MASTER_PIN_MOSI: 24 SPI_0_MASTER_PIN_MISO: 25 SPI_0_SLAVE_PIN_SCK: 23 SPI_0_SLAVE_PIN_MOSI: 24 SPI_0_SLAVE_PIN_MISO: 25 SPI_0_SLAVE_PIN_SS: 22 I2C_0_PIN_SCL: 27 I2C_0_PIN_SDA: 26 CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG NFFS_FLASH_AREA: FLASH_AREA_NFFS COREDUMP_FLASH_AREA: FLASH_AREA_IMAGE_1 MCU_DCDC_ENABLED: 1 MCU_LFCLK_SOURCE: LFXO BOOT_SERIAL_DETECT_PIN: 13 # Button 1 syscfg.vals.BLE_CONTROLLER: TIMER_0: 0 TIMER_5: 1 OS_CPUTIME_FREQ: 32768 OS_CPUTIME_TIMER_NUM: 5 BLE_LL_RFMGMT_ENABLE_TIME: 1500