Static Call Graph for image .\Objects\customboot.axf

Function Pointers

• ACMP0_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• ACMP1_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• ADC_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• AES_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• BOD_IRQHandler from mk_misc.o(.text.BOD_IRQHandler) referenced from startup_mk800x.o(RESET)
• CALIB_IRQHandler from mk_calib.o(.text.CALIB_IRQHandler) referenced from startup_mk800x.o(RESET)
• DMA_IRQHandler from mk_dma.o(.text.DMA_IRQHandler) referenced from startup_mk800x.o(RESET)
• FLASH_CTRL_IRQHandler from mk_flash.o(.text.FLASH_CTRL_IRQHandler) referenced from startup_mk800x.o(RESET)
• GPIO_IRQHandler from mk_gpio.o(.text.GPIO_IRQHandler) referenced from startup_mk800x.o(RESET)
• HardFault_Handler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• I2C0_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• LSP_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• MAC_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• NMI_Handler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• PHY_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• PHY_TIMER_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• PWM_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• PendSV_Handler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• RCO32K_CAL_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• RTC_ALARM_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• RTC_TICK_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• Reset_Handler from startup_mk800x.o(.text.Reset_Handler) referenced from startup_mk800x.o(RESET)
• SLEEP_TIMER_IRQHandler from mk_sleep_timer.o(.text.SLEEP_TIMER_IRQHandler) referenced from startup_mk800x.o(RESET)
• SPI0_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• SPI1_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• SVC_Handler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• SysTick_Handler from mk_misc.o(.text.SysTick_Handler) referenced from startup_mk800x.o(RESET)
• TIMER0_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• TIMER1_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• TIMER2_IRQHandler from mk_dual_timer.o(.text.TIMER2_IRQHandler) referenced from startup_mk800x.o(RESET)
• TIMER3_IRQHandler from mk_dual_timer.o(.text.TIMER3_IRQHandler) referenced from startup_mk800x.o(RESET)
• TRNG_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• UART0_IRQHandler from mk_uart.o(.text.UART0_IRQHandler) referenced from startup_mk800x.o(RESET)
• UART1_IRQHandler from mk_uart.o(.text.UART1_IRQHandler) referenced from startup_mk800x.o(RESET)
• WAKEUP_IRQHandler from startup_mk800x.o(.text.Default_Handler) referenced from startup_mk800x.o(RESET)
• WDT_IRQHandler from mk_wdt.o(.text.WDT_IRQHandler) referenced from startup_mk800x.o(RESET)
• __main from entry.o(.ARM.Collect$$$$00000000) referenced from startup_mk800x.o(.text.start_main_asm)
• clock_attach from mk_clock.o(.text.clock_attach) referenced from board.o(.text.board_clock_run)
• flash_dma_callback from mk_flash.o(.text.flash_dma_callback) referenced from mk_flash.o(.text.flash_read)
• main from customboot.o(.text.main) referenced from entry9a.o(.ARM.Collect$$$$0000000B)
• uart_dma_callback from mk_uart.o(.text.uart_dma_callback) referenced from mk_uart.o(.text.uart_send)

Global Symbols

__main (Thumb, 0 bytes, Stack size unknown bytes, entry.o(.ARM.Collect$$$$00000000))
[Address Reference Count : 1]

• startup_mk800x.o(.text.start_main_asm)

_main_stk (Thumb, 0 bytes, Stack size unknown bytes, entry4.o(.ARM.Collect$$$$00000003))

_main_scatterload (Thumb, 0 bytes, Stack size unknown bytes, entry5.o(.ARM.Collect$$$$00000004))

[Calls]

• >>   __scatterload

__main_after_scatterload (Thumb, 0 bytes, Stack size unknown bytes, entry5.o(.ARM.Collect$$$$00000004))

[Called By]

• >>   __scatterload

_main_clock (Thumb, 0 bytes, Stack size unknown bytes, entry7b.o(.ARM.Collect$$$$00000008))

_main_cpp_init (Thumb, 0 bytes, Stack size unknown bytes, entry8b.o(.ARM.Collect$$$$0000000A))

_main_init (Thumb, 0 bytes, Stack size unknown bytes, entry9a.o(.ARM.Collect$$$$0000000B))

__rt_final_cpp (Thumb, 0 bytes, Stack size unknown bytes, entry10a.o(.ARM.Collect$$$$0000000D))

__rt_final_exit (Thumb, 0 bytes, Stack size unknown bytes, entry11a.o(.ARM.Collect$$$$0000000F))

__aeabi_uidiv (Thumb, 0 bytes, Stack size 12 bytes, uidiv.o(.text))

[Stack]

• Max Depth = 12
• Call Chain = __aeabi_uidiv

• >>   flash_read
• >>   flash_write_quad_mode

__aeabi_uidivmod (Thumb, 44 bytes, Stack size 12 bytes, uidiv.o(.text), UNUSED)

__aeabi_memcpy (Thumb, 36 bytes, Stack size 0 bytes, memcpya.o(.text))

[Called By]

• >>   flash_read
• >>   flash_open
• >>   sys_timer_open

__aeabi_memcpy4 (Thumb, 0 bytes, Stack size 0 bytes, memcpya.o(.text), UNUSED)

__aeabi_memcpy8 (Thumb, 0 bytes, Stack size 0 bytes, memcpya.o(.text))

[Called By]

• >>   main

__aeabi_memset (Thumb, 14 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)

[Called By]

• >>   _memset$wrapper
• >>   __aeabi_memclr

__aeabi_memset4 (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)

__aeabi_memset8 (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)

__aeabi_memclr (Thumb, 4 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)

[Calls]

• >>   __aeabi_memset

__aeabi_memclr4 (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text))

[Called By]

• >>   uart_send

__aeabi_memclr8 (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)

_memset$wrapper (Thumb, 18 bytes, Stack size 8 bytes, memseta.o(.text), UNUSED)

[Calls]

• >>   __aeabi_memset

__scatterload (Thumb, 28 bytes, Stack size 0 bytes, init.o(.text))

[Calls]

• >>   __main_after_scatterload

• >>   _main_scatterload

__scatterload_rt2 (Thumb, 0 bytes, Stack size 0 bytes, init.o(.text), UNUSED)

__decompress (Thumb, 0 bytes, Stack size unknown bytes, __dczerorl.o(.text), UNUSED)

__decompress0 (Thumb, 58 bytes, Stack size unknown bytes, __dczerorl.o(.text), UNUSED)

BOD_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, mk_misc.o(.text.BOD_IRQHandler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

CALIB_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, mk_calib.o(.text.CALIB_IRQHandler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

DMA_IRQHandler (Thumb, 104 bytes, Stack size 24 bytes, mk_dma.o(.text.DMA_IRQHandler))

[Stack]

• Max Depth = 24
• Call Chain = DMA_IRQHandler

• startup_mk800x.o(RESET)

ACMP0_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))

[Calls]

• >>   ACMP0_IRQHandler

• >>   ACMP0_IRQHandler

• startup_mk800x.o(RESET)

ACMP1_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

ADC_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

AES_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

Default_Handler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler), UNUSED)

HardFault_Handler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

I2C0_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

LSP_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

MAC_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

NMI_Handler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

PHY_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

PHY_TIMER_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

PWM_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

PendSV_Handler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

RCO32K_CAL_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

RTC_ALARM_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

RTC_TICK_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

SPI0_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

SPI1_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

SVC_Handler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

TIMER0_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

TIMER1_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

TRNG_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

WAKEUP_IRQHandler (Thumb, 2 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Default_Handler))
[Address Reference Count : 1]

• startup_mk800x.o(RESET)

FLASH_CTRL_IRQHandler (Thumb, 44 bytes, Stack size 8 bytes, mk_flash.o(.text.FLASH_CTRL_IRQHandler))

[Stack]

• Max Depth = 8
• Call Chain = FLASH_CTRL_IRQHandler

• startup_mk800x.o(RESET)

GPIO_IRQHandler (Thumb, 56 bytes, Stack size 24 bytes, mk_gpio.o(.text.GPIO_IRQHandler))

[Stack]

• Max Depth = 24
• Call Chain = GPIO_IRQHandler

• startup_mk800x.o(RESET)

Reset_Handler (Thumb, 32 bytes, Stack size 0 bytes, startup_mk800x.o(.text.Reset_Handler))

[Calls]

• >>   start_main_asm
• >>   SystemInit

• startup_mk800x.o(RESET)

SLEEP_TIMER_IRQHandler (Thumb, 60 bytes, Stack size 8 bytes, mk_sleep_timer.o(.text.SLEEP_TIMER_IRQHandler))

[Stack]

• Max Depth = 8
• Call Chain = SLEEP_TIMER_IRQHandler

• startup_mk800x.o(RESET)

SerialPutChar (Thumb, 36 bytes, Stack size 16 bytes, mk_uart.o(.text.SerialPutChar))

[Stack]

• Max Depth = 112
• Call Chain = SerialPutChar ⇒ uart_send ⇒ dma_transfer

• >>   uart_send

• >>   Serial_PutString

Serial_PutString (Thumb, 20 bytes, Stack size 8 bytes, mk_uart.o(.text.Serial_PutString))

[Stack]

• Max Depth = 120
• Call Chain = Serial_PutString ⇒ SerialPutChar ⇒ uart_send ⇒ dma_transfer

• >>   SerialPutChar

• >>   main

SysTick_Handler (Thumb, 24 bytes, Stack size 8 bytes, mk_misc.o(.text.SysTick_Handler))

[Stack]

• Max Depth = 8
• Call Chain = SysTick_Handler

• startup_mk800x.o(RESET)

SystemInit (Thumb, 12 bytes, Stack size 0 bytes, system_mk800x.o(.text.SystemInit))

[Called By]

• >>   Reset_Handler

TIMER2_IRQHandler (Thumb, 28 bytes, Stack size 16 bytes, mk_dual_timer.o(.text.TIMER2_IRQHandler))

[Stack]

• Max Depth = 16
• Call Chain = TIMER2_IRQHandler

• startup_mk800x.o(RESET)

TIMER3_IRQHandler (Thumb, 32 bytes, Stack size 16 bytes, mk_dual_timer.o(.text.TIMER3_IRQHandler))

[Stack]

• Max Depth = 16
• Call Chain = TIMER3_IRQHandler

• startup_mk800x.o(RESET)

UART0_IRQHandler (Thumb, 10 bytes, Stack size 8 bytes, mk_uart.o(.text.UART0_IRQHandler))

[Stack]

• Max Depth = 48
• Call Chain = UART0_IRQHandler ⇒ uart_irq_handler ⇒ uart_state_clear

• >>   uart_irq_handler

• startup_mk800x.o(RESET)

UART1_IRQHandler (Thumb, 10 bytes, Stack size 8 bytes, mk_uart.o(.text.UART1_IRQHandler))

[Stack]

• Max Depth = 48
• Call Chain = UART1_IRQHandler ⇒ uart_irq_handler ⇒ uart_state_clear

• >>   uart_irq_handler

• startup_mk800x.o(RESET)

WDT_IRQHandler (Thumb, 28 bytes, Stack size 16 bytes, mk_wdt.o(.text.WDT_IRQHandler))

[Stack]

• Max Depth = 16
• Call Chain = WDT_IRQHandler

• startup_mk800x.o(RESET)

board_clock_run (Thumb, 100 bytes, Stack size 24 bytes, board.o(.text.board_clock_run))

[Stack]

• Max Depth = 88
• Call Chain = board_clock_run ⇒ sys_timer_open ⇒ clock_get_frequency ⇒ clock_get_apb_clk_freq ⇒ clock_get_ahb_clk_freq

• >>   clock_set_divider
• >>   delay_us
• >>   calib_start
• >>   calib_open
• >>   calib_close
• >>   calib_check
• >>   sys_timer_open
• >>   sys_tick_start

• >>   main

board_configure (Thumb, 2 bytes, Stack size 0 bytes, board.o(.text.board_configure))

[Called By]

• >>   main

calib_check (Thumb, 16 bytes, Stack size 0 bytes, mk_calib.o(.text.calib_check))

[Called By]

• >>   board_clock_run

calib_chip (Thumb, 296 bytes, Stack size 16 bytes, mk_calib.o(.text.calib_chip))

[Stack]

• Max Depth = 16
• Call Chain = calib_chip

• >>   clock_enable
• >>   mk_chip_id

• >>   main

calib_close (Thumb, 12 bytes, Stack size 8 bytes, mk_calib.o(.text.calib_close))

[Stack]

• Max Depth = 8
• Call Chain = calib_close

• >>   clock_disable

• >>   board_clock_run

calib_open (Thumb, 20 bytes, Stack size 8 bytes, mk_calib.o(.text.calib_open))

[Stack]

• Max Depth = 8
• Call Chain = calib_open

• >>   reset_module
• >>   clock_enable

• >>   board_clock_run

calib_start (Thumb, 16 bytes, Stack size 0 bytes, mk_calib.o(.text.calib_start))

[Called By]

• >>   board_clock_run

clock_attach (Thumb, 188 bytes, Stack size 16 bytes, mk_clock.o(.text.clock_attach))

[Stack]

• Max Depth = 16
• Call Chain = clock_attach

• >>   clock_xtal38m4_injection_set

• board.o(.text.board_clock_run)

clock_disable (Thumb, 16 bytes, Stack size 0 bytes, mk_clock.o(.text.clock_disable))

[Called By]

• >>   uart_close
• >>   calib_close
• >>   gpio_close

clock_enable (Thumb, 20 bytes, Stack size 0 bytes, mk_clock.o(.text.clock_enable))

[Called By]

• >>   dma_open
• >>   flash_open
• >>   calib_open
• >>   calib_chip
• >>   gpio_open
• >>   dual_timer_open

clock_get_frequency (Thumb, 82 bytes, Stack size 8 bytes, mk_clock.o(.text.clock_get_frequency))

[Stack]

• Max Depth = 24
• Call Chain = clock_get_frequency ⇒ clock_get_apb_clk_freq ⇒ clock_get_ahb_clk_freq

• >>   clock_get_sys_clk_freq
• >>   clock_get_apb_clk_freq
• >>   clock_get_ahb_clk_freq

• >>   sys_timer_open

clock_set_divider (Thumb, 96 bytes, Stack size 0 bytes, mk_clock.o(.text.clock_set_divider))

[Called By]

• >>   flash_open
• >>   board_clock_run

clock_xtal38m4_injection_set (Thumb, 60 bytes, Stack size 0 bytes, mk_clock.o(.text.clock_xtal38m4_injection_set))

[Called By]

• >>   clock_attach

delay_us (Thumb, 28 bytes, Stack size 0 bytes, mk_misc.o(.text.delay_us))

[Called By]

• >>   flash_open
• >>   flash_wait_done
• >>   board_clock_run

dma_open (Thumb, 220 bytes, Stack size 24 bytes, mk_dma.o(.text.dma_open))

[Stack]

• Max Depth = 24
• Call Chain = dma_open

• >>   reset_module
• >>   clock_enable

• >>   uart_send
• >>   flash_read

dma_transfer (Thumb, 76 bytes, Stack size 24 bytes, mk_dma.o(.text.dma_transfer))

[Stack]

• Max Depth = 24
• Call Chain = dma_transfer

• >>   uart_send
• >>   flash_read
• >>   flash_dma_callback

dual_timer_get (Thumb, 12 bytes, Stack size 0 bytes, mk_dual_timer.o(.text.dual_timer_get))

[Called By]

• >>   sys_timer_get

dual_timer_open (Thumb, 204 bytes, Stack size 24 bytes, mk_dual_timer.o(.text.dual_timer_open))

[Stack]

• Max Depth = 24
• Call Chain = dual_timer_open

• >>   clock_enable

• >>   sys_timer_open

dual_timer_start (Thumb, 24 bytes, Stack size 0 bytes, mk_dual_timer.o(.text.dual_timer_start))

[Called By]

• >>   sys_timer_open

flash_check_busy (Thumb, 120 bytes, Stack size 32 bytes, mk_flash.o(.text.flash_check_busy))

[Stack]

• Max Depth = 120
• Call Chain = flash_check_busy ⇒ flash_read_status ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   flash_write_mem_cmd
• >>   flash_read_status

• >>   main

flash_open (Thumb, 388 bytes, Stack size 24 bytes, mk_flash.o(.text.flash_open))

[Stack]

• Max Depth = 144
• Call Chain = flash_open ⇒ flash_write_quad_mode ⇒ flash_wait_done ⇒ flash_read_status ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   reset_module
• >>   clock_set_divider
• >>   clock_enable
• >>   delay_us
• >>   flash_write_quad_mode
• >>   flash_write_mem_cmd
• >>   flash_write_cmd
• >>   flash_wait_status
• >>   flash_reset_cmd
• >>   __aeabi_memcpy

• >>   main

flash_read (Thumb, 388 bytes, Stack size 80 bytes, mk_flash.o(.text.flash_read))

[Stack]

• Max Depth = 160
• Call Chain = flash_read ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   dma_transfer
• >>   dma_open
• >>   flash_write_mem_cmd
• >>   flash_write_cmd
• >>   flash_state_update
• >>   flash_reset_cmd
• >>   __aeabi_memcpy
• >>   __aeabi_uidiv

• >>   main

gpio_close (Thumb, 12 bytes, Stack size 8 bytes, mk_gpio.o(.text.gpio_close))

[Stack]

• Max Depth = 8
• Call Chain = gpio_close

• >>   clock_disable

• >>   main

gpio_open (Thumb, 20 bytes, Stack size 8 bytes, mk_gpio.o(.text.gpio_open))

[Stack]

• Max Depth = 8
• Call Chain = gpio_open

• >>   reset_module
• >>   clock_enable

• >>   main

main (Thumb, 272 bytes, Stack size 8 bytes, customboot.o(.text.main))

[Stack]

• Max Depth = 168
• Call Chain = main ⇒ flash_read ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   uart_close
• >>   Serial_PutString
• >>   flash_read
• >>   flash_open
• >>   flash_check_busy
• >>   calib_chip
• >>   gpio_open
• >>   gpio_close
• >>   __aeabi_memcpy8
• >>   board_configure
• >>   board_clock_run

• entry9a.o(.ARM.Collect$$$$0000000B)

mk_chip_id (Thumb, 12 bytes, Stack size 0 bytes, mk_misc.o(.text.mk_chip_id))

[Called By]

• >>   calib_chip

reset_module (Thumb, 28 bytes, Stack size 0 bytes, mk_reset.o(.text.reset_module))

[Called By]

• >>   dma_open
• >>   flash_open
• >>   calib_open
• >>   gpio_open

start_main_asm (Thumb, 4 bytes, Stack size 0 bytes, startup_mk800x.o(.text.start_main_asm))

[Called By]

• >>   Reset_Handler

sys_tick_start (Thumb, 44 bytes, Stack size 8 bytes, mk_misc.o(.text.sys_tick_start))

[Stack]

• Max Depth = 8
• Call Chain = sys_tick_start

• >>   board_clock_run

sys_timer_get (Thumb, 12 bytes, Stack size 8 bytes, mk_misc.o(.text.sys_timer_get))

[Stack]

• Max Depth = 8
• Call Chain = sys_timer_get

• >>   dual_timer_get

• >>   flash_wait_status
• >>   flash_wait_done

sys_timer_open (Thumb, 76 bytes, Stack size 40 bytes, mk_misc.o(.text.sys_timer_open))

[Stack]

• Max Depth = 64
• Call Chain = sys_timer_open ⇒ clock_get_frequency ⇒ clock_get_apb_clk_freq ⇒ clock_get_ahb_clk_freq

• >>   clock_get_frequency
• >>   dual_timer_start
• >>   dual_timer_open
• >>   __aeabi_memcpy

• >>   board_clock_run

uart_close (Thumb, 128 bytes, Stack size 16 bytes, mk_uart.o(.text.uart_close))

[Stack]

• Max Depth = 16
• Call Chain = uart_close

• >>   clock_disable

• >>   main

uart_irq_handler (Thumb, 376 bytes, Stack size 32 bytes, mk_uart.o(.text.uart_irq_handler))

[Stack]

• Max Depth = 40
• Call Chain = uart_irq_handler ⇒ uart_state_clear

• >>   uart_state_clear

• >>   UART1_IRQHandler
• >>   UART0_IRQHandler

uart_send (Thumb, 340 bytes, Stack size 72 bytes, mk_uart.o(.text.uart_send))

[Stack]

• Max Depth = 96
• Call Chain = uart_send ⇒ dma_transfer

• >>   dma_transfer
• >>   dma_open
• >>   uart_state_set
• >>   uart_state_clear
• >>   __aeabi_memclr4

• >>   SerialPutChar

__scatterload_copy (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_copy), UNUSED)

__scatterload_null (Thumb, 2 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_null), UNUSED)

__scatterload_zeroinit (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_zeroinit), UNUSED)

Local Symbols

clock_get_ahb_clk_freq (Thumb, 20 bytes, Stack size 8 bytes, mk_clock.o(.text.clock_get_ahb_clk_freq))

[Stack]

• Max Depth = 8
• Call Chain = clock_get_ahb_clk_freq

• >>   clock_get_sys_clk_freq

• >>   clock_get_frequency
• >>   clock_get_apb_clk_freq

clock_get_apb_clk_freq (Thumb, 20 bytes, Stack size 8 bytes, mk_clock.o(.text.clock_get_apb_clk_freq))

[Stack]

• Max Depth = 16
• Call Chain = clock_get_apb_clk_freq ⇒ clock_get_ahb_clk_freq

• >>   clock_get_ahb_clk_freq

• >>   clock_get_frequency

clock_get_sys_clk_freq (Thumb, 36 bytes, Stack size 0 bytes, mk_clock.o(.text.clock_get_sys_clk_freq))

[Called By]

• >>   clock_get_frequency
• >>   clock_get_ahb_clk_freq

flash_dma_callback (Thumb, 216 bytes, Stack size 24 bytes, mk_flash.o(.text.flash_dma_callback))

[Stack]

• Max Depth = 104
• Call Chain = flash_dma_callback ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   dma_transfer
• >>   flash_write_cmd
• >>   flash_reset_cmd

• mk_flash.o(.text.flash_read)

flash_read_status (Thumb, 32 bytes, Stack size 8 bytes, mk_flash.o(.text.flash_read_status))

[Stack]

• Max Depth = 88
• Call Chain = flash_read_status ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   flash_write_cmd
• >>   flash_wait_status

• >>   flash_check_busy
• >>   flash_wait_done

flash_reset_cmd (Thumb, 24 bytes, Stack size 8 bytes, mk_flash.o(.text.flash_reset_cmd))

[Stack]

• Max Depth = 40
• Call Chain = flash_reset_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   flash_wait_status

• >>   flash_read
• >>   flash_open
• >>   flash_dma_callback

flash_state_update (Thumb, 72 bytes, Stack size 16 bytes, mk_flash.o(.text.flash_state_update))

[Stack]

• Max Depth = 16
• Call Chain = flash_state_update

• >>   flash_read

flash_wait_done (Thumb, 40 bytes, Stack size 16 bytes, mk_flash.o(.text.flash_wait_done))

[Stack]

• Max Depth = 104
• Call Chain = flash_wait_done ⇒ flash_read_status ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   sys_timer_get
• >>   delay_us
• >>   flash_read_status

• >>   flash_write_quad_mode

flash_wait_status (Thumb, 56 bytes, Stack size 24 bytes, mk_flash.o(.text.flash_wait_status))

[Stack]

• Max Depth = 32
• Call Chain = flash_wait_status ⇒ sys_timer_get

• >>   sys_timer_get

• >>   flash_open
• >>   flash_write_mem_cmd
• >>   flash_write_cmd
• >>   flash_reset_cmd
• >>   flash_read_status

flash_write_cmd (Thumb, 208 bytes, Stack size 48 bytes, mk_flash.o(.text.flash_write_cmd))

[Stack]

• Max Depth = 80
• Call Chain = flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   flash_wait_status

• >>   flash_read
• >>   flash_open
• >>   flash_write_quad_mode
• >>   flash_read_status
• >>   flash_dma_callback

flash_write_mem_cmd (Thumb, 40 bytes, Stack size 8 bytes, mk_flash.o(.text.flash_write_mem_cmd))

[Stack]

• Max Depth = 40
• Call Chain = flash_write_mem_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   flash_wait_status

• >>   flash_read
• >>   flash_open
• >>   flash_check_busy

flash_write_quad_mode (Thumb, 116 bytes, Stack size 16 bytes, mk_flash.o(.text.flash_write_quad_mode))

[Stack]

• Max Depth = 120
• Call Chain = flash_write_quad_mode ⇒ flash_wait_done ⇒ flash_read_status ⇒ flash_write_cmd ⇒ flash_wait_status ⇒ sys_timer_get

• >>   flash_write_cmd
• >>   flash_wait_done
• >>   __aeabi_uidiv

• >>   flash_open

uart_dma_callback (Thumb, 200 bytes, Stack size 24 bytes, mk_uart.o(.text.uart_dma_callback))

[Stack]

• Max Depth = 32
• Call Chain = uart_dma_callback ⇒ uart_state_clear

• >>   uart_state_clear

• mk_uart.o(.text.uart_send)

uart_state_clear (Thumb, 56 bytes, Stack size 8 bytes, mk_uart.o(.text.uart_state_clear))

[Stack]

• Max Depth = 8
• Call Chain = uart_state_clear

• >>   uart_send
• >>   uart_irq_handler
• >>   uart_dma_callback

uart_state_set (Thumb, 96 bytes, Stack size 16 bytes, mk_uart.o(.text.uart_state_set))

[Stack]

• Max Depth = 16
• Call Chain = uart_state_set

• >>   uart_send

Undefined Global Symbols